RGL
-
Posts
5,348 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by RGL
-
I reckon they were only attached when they were being used! -
Port side anchors (sans Bouys for the moment). I've included a few angles to show why the bumpkin stays would need to be unslung when the anchor is used (If the plans are correct, but all a bit late for the that).
-
Port side anchors. Having just looked at my log, I've forgotten to attached the bouys! that will be next and an easy fix. Firstly the cable running into the hold. Dust comes up nicely with the zoom
-
Well, some time off and a rainy day, perfect for some anchor work. Now Banyan has posted his Bumpkins and it's put some thought as to how the hell do the anchors get pulled up past the Bumpkin stays? My plan, one side with a single stay removed (they can be removed very easily) and being drawn up with the mast takle used to pull up the bottom of the achors and the port side fully slung up. I have posted the AOTS pic of the slung anchors, and it just wont fly unless it's done this way.
-
I'm now facing the same predicament as I've completed the anchors, and I think the cable will have to be slung under the rigging for the bumpkins. The foremast tackle is used to hook onto the bottom of the anchor and lift it up to the gunnel. I'll see how it goes as it does look clumsy
-
Well done, they are a pain to do at this scale
-
Rigging line looks great. Is it your own?
-
Yep, the supplied ones have holes facing the wrong way which I'll have to re drill. I'm also crap at making a cable laid anchor rope! Nope, I'm wrong and you are correct. Lucky that I paid attention. I stayed up till 1.30am to watch the Aussie fall over at the start of his ice skating race, thank god I didn't get the drill out!
-
I took out the two anchors that came with the AL kit back when I bought it last century (It's the one on the left). Nope, not happy. I replaced them with 4 from Caldercraft. The difficulty I'm going to have is that the holes in the shaft for the anchor ring is orientated the wrong way, as you can see from the AOTS and Parkin, they face the other way.
-
OK, leave over, the kids are back at school, and the garden has been weeded and covered in a truck load of mulch. I thought as a sorbet, I would make the anchor bouys. as you can see from the photos, a bit of off cut dowel and a file and they came out quite easily. I then spent two days serving the ropes that hold them, fitted them just like a real one and compared them on the shrouds, and at 1/48 they would have looked fine, not at 1/60. the term clunky comes to mind. As such I used un-served rope and pained them black and much more to scale. If you look at the photo of them from the AOTS in the next post you will see the proper way are are supposed to look, but I'm just not Dafi and can't work at that scale.
-
Really nice build
-
Lovely work
-
From memory mine were 4mm wide, I'd dry fit the entire length but I drew on the frames in pencil FO I knew how to put the 6 butt shift. That way the tree nails line up correctly. It also resulted in not using stealers at the stern or the bow
-
As such, each lower mast has it's own tackle block set up, with the rings already placed on the channel years ago. You really do have to plan ahead. The Fore tackle was obviously used to fish out the end of the anchors to get them out of the sea. I shall endeavour to replicate this when i do the anchors.
-
I've finally shipped the fish hook tackle. I did a bit of research on this (I think to meet Marquardt's rigging plan) and found the two following diagrams.
-
I've kept this pillar off the ship to date as it would only get in the road. The bow swivel cannons were a slightly modified version of a Caldercraft cannon copied off the AOTS.
-
Or; as an alternative, there is one plank called thick stuff just above the Wales, and you can do three anchor stock below. I still regret not doing that one plank.
-
looking good
-
Jason, sorry to stick my nose into Rowland's log, I'm also doing the AL Endeavour. I'd strongly recommend you swap out all the planking wood supplied. The decking planks are very waxy and break very easily. The lighter but thicker ones are for the first layer, with the darker thin ones for the second layer. Greg.
-
Thanks gents, things will slow down now, I want to get the mast tackles done next, and time to bite the bullet and make up some blocks with metal hooks. Then the fish hook davits (which are constructed but unshipped) to run off the foremast tackle, then the 4 anchors, the stunsail booms, do up chucks lantern, then wrap it all in glad wrap and start on the yards. So, same time next year then....
Our Emblem ®
