KORTES
-
Posts
543 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by KORTES
-
I had no doubts the the work of such level requires knowledge and skills in many different fields, still what I see inspires fascination and admiration. The work of the Master. My best regards, Alexander -
The second, stage. Now, after the oil has lighted some previously unnoticed defects, I will try to eliminate them using card scraper and sand paper
- 403 replies
-
- 18
-
-
Thank you very much Johann. Your work is also gorgeous and I admire your craftsmanship a lot. My best regards, Alexander.
-
While the oil is drying, “pronating”, I installed Botteloef Opsteker with installed Boegstag Waterstag.
- 403 replies
-
- 23
-
-
Dear Valeriy. Your handicraft is truly amazing! Your work is outstanding masterpiece. My best regards, Alexander.
-
Dear Michael. Your mastery of the instruments as well as your work performance culture fascinates and are the highest standard. I'm very happy to have the opportunity to observe Your work. My best regards, Alexander.
-
My greetings dear Doris. I wish you a speedy recovery and getting back to your favorite pastime. Your work is an inspiration. My best regards, Alexander.
- 1,035 replies
-
- 9
-
-
- royal katherine
- ship of the line
- (and 1 more)
-
Thank you very much, Karl, I have corrected my mistake. I'm very grateful for the information, but on the "SPERWER" this element looks simplier. My best regards, Alexander.
-
I’m moving to the "oil" work. After a critical assessment, I decided to finalize some elements. I have modified zwaarden and made fasteners.
- 403 replies
-
- 20
-
-
When I have made some pieces. it comes to oil coating, lots of elements have to be attached before putting coating. SсhootoverloopFok.
- 403 replies
-
- 25
-
-
Thank you very much Colleagues.
-
My dear colleagues, I wish you and your families Happy New Year! My best wishes, wishes of health, prosperity and inspiration. Happy New Year!
-
My greetings dear Valeriy I haven’t worked with paper, although I have been reading a lot about it. Time ago I picked from several variations of caulking imitation, and chose this technology and from that time on I have been using only it. For several reasons – plastic can be surfaced and scraped very well in final polishing of the deck covering. And secondly, to my point of view, it resembles better the seal of joints on the deck. And thirdly, on these ships joints are very wide and paper imitation wouldn’t work. Even plastic had to be glued in two layers. My best regards, Happy New Year.
-
My greetings dear Geert. This element of carving was made using nothing but incisor. For the finish processing I had to surface it using a wooden toothpick, fastened by microdrill. My best regards. Happy New Year!
-
Hello Paul. I used plastic film for calking. I used this method when i was building "Carolina". All that one needs for this can be found in any stationary shop. Plastic bag for paper (they can be found in different colors and thickness) and two sides adhesive duct tape. I use the balck side of the plastic bag. I put the duct tape on plastic fim and cut it in stripes according to the thickness of the batten, it can be made with a small margin, then I separate protective paper from the strip and stick on the end of the batten, the allowances are cut off with the knife, - it's cutting off nicely. Here are several photos, maybe they can be of use to somebody. If you have any questions - it would be my pleasure to help. My best regards, Alexander.
-
The final installation of the deck-house. I have coated the state cabin with oil. Probably, in the future, few will see it.
Our Emblem ®
