Supplies of the Ship Modeler's Handbook are running out. Get your copy NOW before they are gone! Click here to order ×

yamsterman

Members

View Profile See their activity

Posts
549
Joined
April 19, 2013
Last visited
8 hours ago

Reputation Activity

yamsterman got a reaction from CiscoH in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 21, 2024

hi all
time for an update. inboard has now been planked and treenailed......cleats have been made and fitted....took three attempts to get those little b*******s looking right.
deck fittings have been placed purely for the photos.
work has started on the quarter deck
next up will be the iron work....eyebolts,gunport hinges etc etc. stocked up recently on copper tube and sheet ready for the marathon blacksmith session to come

still plenty of work to to but were getting closer to the finish line!!!!

photos inc as per usual

cheers for now......mick
yamsterman got a reaction from CiscoH in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 21, 2024

Hi carl
I have plans for many more clamps old pal......youre right...you can never have enough.
Treenails arnt in yet...just predrilled holes.
Added some more photos but this time from the phone rather than the camera.....as im at work
Cheers....mick
yamsterman got a reaction from davec in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF November 2, 2018

hi all
some more progress to report.
iron work for the breeching ropes done and fitted...quarter deck finished but not yet fixed permanently
ive made a rough start on the capping rails....more work to do on those yet
still lots to do .....all the fiddly stuff now!!

ive put a few deck fittings in place but nothings fixed as yet

cheers for now ....mick
yamsterman got a reaction from alde in Washington 1777 by Pirate adam - 1:48 scale - Galley - POF June 26, 2018

hi adam
nice work so far!
just be careful with some of those drift bolts on the forward and aft frames......some of the frame drawings dont show any bolt locations.....if youre tempted to put them in you may find them getting a tad close to the frame edges when you come to fair the hull.......or it could just be my build!!!!!
shall be following avidly

cheers....mick
yamsterman got a reaction from davec in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF November 2, 2018

hi all
quarter deck has now been finished.....more or less.....it wont be installed until all the ring bolts are made and attached.
rear windows are in but not yet glazed.
now to spend some time clogging my files with copper....time for the iron work to be made!

photos as per usual

cheers for now....mick
yamsterman got a reaction from JOUFF in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF July 4, 2018

hi all
quarter deck has now been finished.....more or less.....it wont be installed until all the ring bolts are made and attached.
rear windows are in but not yet glazed.
now to spend some time clogging my files with copper....time for the iron work to be made!

photos as per usual

cheers for now....mick
yamsterman got a reaction from yvesvidal in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF April 27, 2024

HI ALL
MANAGED TO GRAB SOME MODELMAKING TIME OVER THE LAST WEEK.......NO WORK! NICE LITTLE BREAK.
STOVE HAS BEEN PAINTED AND PUMP WELL AND SHOT LOCKERS FINISHED.
TIME TO START ON THE MAIN DECK.
BEAMS HAVE BEEN PREFABRICATED FROM SLIGHTLY THICKER STOCK AND SANDED TO SHAPE.
BASIC RUDDER ASSEMBLED JUST NEEDS THE IRON WORK DOING.
PRECUT SOME HOLLY READY FOR TURNING THE HOLD PILLARS.

TREATED MY SELF TO A NICE LITTLE SHERLINE SELF CENTERING CHUCK........OUCH A TAD PRICEY IN THE UK!!!!
BUT INFINITELY SUPERIOR TO THE FAR EASTERN OFFERINGS.

THATS ALL FOLKS...FOR NOW AT LEAST.

CHEERS....MICK
yamsterman got a reaction from CDW in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 7, 2018

HI ALL
MANAGED TO GRAB SOME MODELMAKING TIME OVER THE LAST WEEK.......NO WORK! NICE LITTLE BREAK.
STOVE HAS BEEN PAINTED AND PUMP WELL AND SHOT LOCKERS FINISHED.
TIME TO START ON THE MAIN DECK.
BEAMS HAVE BEEN PREFABRICATED FROM SLIGHTLY THICKER STOCK AND SANDED TO SHAPE.
BASIC RUDDER ASSEMBLED JUST NEEDS THE IRON WORK DOING.
PRECUT SOME HOLLY READY FOR TURNING THE HOLD PILLARS.

TREATED MY SELF TO A NICE LITTLE SHERLINE SELF CENTERING CHUCK........OUCH A TAD PRICEY IN THE UK!!!!
BUT INFINITELY SUPERIOR TO THE FAR EASTERN OFFERINGS.

THATS ALL FOLKS...FOR NOW AT LEAST.

CHEERS....MICK
yamsterman got a reaction from davec in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF November 2, 2018

Hi carl
I have plans for many more clamps old pal......youre right...you can never have enough.
Treenails arnt in yet...just predrilled holes.
Added some more photos but this time from the phone rather than the camera.....as im at work
Cheers....mick
yamsterman got a reaction from tlevine in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 8, 2018

hi all
quarter deck has now been finished.....more or less.....it wont be installed until all the ring bolts are made and attached.
rear windows are in but not yet glazed.
now to spend some time clogging my files with copper....time for the iron work to be made!

photos as per usual

cheers for now....mick
yamsterman got a reaction from Canute in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 5, 2018

hi al
i always use the same wood for treenailing as the planks are made from........much more subtle than using a contrasting timber.
the wale strakes i tried something different by way of an experiment....the treenails were made from copper and then blackened with liver of sulphur.
the result was quite pleasing the teenails almost disappearing ,but just visible at the right angle.

cheers....mick
yamsterman got a reaction from Canute in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 5, 2018

hi carl
thanks shipmate
continuing to watch you practice origami with tiny bits of brass!!!!

cheers....mick
yamsterman got a reaction from aviaamator in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 8, 2018

hi all
quarter deck has now been finished.....more or less.....it wont be installed until all the ring bolts are made and attached.
rear windows are in but not yet glazed.
now to spend some time clogging my files with copper....time for the iron work to be made!

photos as per usual

cheers for now....mick
yamsterman got a reaction from mtaylor in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 4, 2018

hi al
i always use the same wood for treenailing as the planks are made from........much more subtle than using a contrasting timber.
the wale strakes i tried something different by way of an experiment....the treenails were made from copper and then blackened with liver of sulphur.
the result was quite pleasing the teenails almost disappearing ,but just visible at the right angle.

cheers....mick
yamsterman got a reaction from mtaylor in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 4, 2018

hi carl
thanks shipmate
continuing to watch you practice origami with tiny bits of brass!!!!

cheers....mick
yamsterman got a reaction from cog in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 4, 2018

hi al
i always use the same wood for treenailing as the planks are made from........much more subtle than using a contrasting timber.
the wale strakes i tried something different by way of an experiment....the treenails were made from copper and then blackened with liver of sulphur.
the result was quite pleasing the teenails almost disappearing ,but just visible at the right angle.

cheers....mick
yamsterman got a reaction from cog in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 4, 2018

hi carl
thanks shipmate
continuing to watch you practice origami with tiny bits of brass!!!!

cheers....mick
yamsterman got a reaction from alde in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 4, 2018

hi al
i always use the same wood for treenailing as the planks are made from........much more subtle than using a contrasting timber.
the wale strakes i tried something different by way of an experiment....the treenails were made from copper and then blackened with liver of sulphur.
the result was quite pleasing the teenails almost disappearing ,but just visible at the right angle.

cheers....mick
yamsterman got a reaction from dvm27 in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 5, 2018

hi all
quarter deck has now been finished.....more or less.....it wont be installed until all the ring bolts are made and attached.
rear windows are in but not yet glazed.
now to spend some time clogging my files with copper....time for the iron work to be made!

photos as per usual

cheers for now....mick
yamsterman got a reaction from albert in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 5, 2018

hi all
quarter deck has now been finished.....more or less.....it wont be installed until all the ring bolts are made and attached.
rear windows are in but not yet glazed.
now to spend some time clogging my files with copper....time for the iron work to be made!

photos as per usual

cheers for now....mick
yamsterman got a reaction from usedtosail in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 4, 2018

hi all
quarter deck has now been finished.....more or less.....it wont be installed until all the ring bolts are made and attached.
rear windows are in but not yet glazed.
now to spend some time clogging my files with copper....time for the iron work to be made!

photos as per usual

cheers for now....mick
yamsterman got a reaction from oneslim in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 4, 2018

hi all
quarter deck has now been finished.....more or less.....it wont be installed until all the ring bolts are made and attached.
rear windows are in but not yet glazed.
now to spend some time clogging my files with copper....time for the iron work to be made!

photos as per usual

cheers for now....mick
yamsterman got a reaction from alde in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 3, 2018

hi all
quarter deck has now been finished.....more or less.....it wont be installed until all the ring bolts are made and attached.
rear windows are in but not yet glazed.
now to spend some time clogging my files with copper....time for the iron work to be made!

photos as per usual

cheers for now....mick
yamsterman got a reaction from davyboy in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 3, 2018

hi all
quarter deck has now been finished.....more or less.....it wont be installed until all the ring bolts are made and attached.
rear windows are in but not yet glazed.
now to spend some time clogging my files with copper....time for the iron work to be made!

photos as per usual

cheers for now....mick
yamsterman got a reaction from Tigersteve in WASHINGTON GALLEY by yamsterman - 1/48 scale - POF June 3, 2018

hi all
quarter deck has now been finished.....more or less.....it wont be installed until all the ring bolts are made and attached.
rear windows are in but not yet glazed.
now to spend some time clogging my files with copper....time for the iron work to be made!

photos as per usual

cheers for now....mick

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

Sign In

yamsterman

Posts

Joined

Last visited