Glen McGuire

I look forward to reading that article when it comes out!

Looking at the water tank ladder you reference on post 224, I think the touch of black grunge is very well done. I often run into the same issue on really small details of my SIB ships. Some details I do for my own satisfaction and don't care if they can't be seen without 6x glasses. But If I want the detail to be somewhat noticeable, I'll go a little brighter/darker/thicker whatever with the paint to make it stand out just a bit. I think you found a nice middle ground with that ladder grunge where it's noticeable and a nice detail if you look close, but it does not jump out and scream "HEY LOOK AT ME!" (which is probably what you don't want).

Nice demo, Tom. Thanks for posting.

Whoa! That is amazing work, Ron!

That's a great story, Ron. Thanks for sharing. I'm hoping my work here is worthy of a similar reaction!

My guiding principle for this project is, “First, do no harm”. As I work through the repairs and additional construction, I don’t want to mess up any of the fine work that Carson’s father accomplished. I decided to kick things off with something that seemed fairly benign. The gun deck is equipped with thirty 24-pound cannons. As you can see from the pic below, the barrels are still solid and had not been drilled out yet. The barrels are made from Britannia metal so I figured they would be fairly easy to drill out. The 24-pound cannons have a bore of 5.8 inches, which at 1/96 makes a 1/16” drill bit pretty close. It was a little awkward drilling the barrels with them installed and sticking out the gun ports, but it went ok for the most part. I say for the most part because a few of them came loose and popped out. That’s when I realized that there were not individual cannons on the gun deck. The barrels have a post on the breach end that fits into a hole drilled into some solid wood inside the gun deck. Ironically, that is pretty much the method I use for my ship-in-bottle ships like the Independence that have gun decks with cannon barrels protruding through the gun ports. The cannon barrels here that popped out were very easy to drill out and reinstall with a bit of wood filler. Here's what it looks like with all the cannon barrels back in place and repainted. The spar deck has much smaller cannonades, 18 pounders I believe. Their barrels have not been drilled out either. However, as you can see in the picture above, they are set back from the gun ports on the gunwale. And for all but a couple, the channel is in the way so it would take a very long and very thin drill bit (probably 1/32" or maybe 3/64") to try and bore those barrels out. The cannonades are all glued to the deck quite securely with complete rigging, so removing them and reinstalling is not an option. So I will probably leave them as is and not risk damage to the surrounding areas by trying to do some heroic drilling.

That's a great looking ship, Chris. Hard to believe it's made out of card!

Fine work, Rob. As usual! That bell is particularly well done.

The boxcar red on the shed is spot on, IMO. And I would love to have a business card I could hand to people that said I was a "Donkeyman"!

Love those baskets! Really nice work, especially the weaving on the second one.

PFC Pile and cousin Goober are a talented pair. Not many seamen could take the ship out for a spin when there are no sails yet!

That shed looks great, Keith! Well done so far.

A couple of months ago, @Keith Black sent me this MSW post from a gentleman in Austin, Texas who was looking for help completing a model. https://modelshipworld.com/topic/36787-looking-for-assistance-completing-model/ Since I also live in Austin, Keith thought this might be of some interest to me. He was right. The gentleman, Carson, was looking for someone to complete a model his father had been working on before unexpectedly passing away late last year. He and his family were hoping to have the model completed as a way to honor and remember their father. I contacted Carson, found out more about the model, and agreed to finish it up for them. I picked up the model earlier this week and have just started to examine it and the kit's documentation. I will also be studying some of the Constitution build logs out here on MSW. Once I get my arms around the whole thing, I’ll put together a plan for how to attack this project. The model is the Blue Jacket Bicentennial Edition of the U.S.S. Constitution. Carson’s father had done a significant amount of very nice work on the model - completing the hull, outfitting both the gun and spar decks, stepping the masts, and completing the complex bowsprit rigging. It appears he was on the verge of diving into the real fun that goes with all the standing and running rigging. Somewhere along the way, the model took some hits and suffered a bit of damage. But just like the real Old Ironsides, the model survived with the hull intact and just a few repairs needed. So this project will be a repair job at first followed by completion of the construction. For repairs, here’s what I’m seeing on initial review: 1. The most significant damage is to the bowsprit which is broken in a couple of places. 2. The sky sail pole on the main mast was broken at some point but has been repaired to a degree. 3. The davits for ship’s boats on both sides are broken off. 4. The masts have been stepped, but the glue bond on the fore and main has come undone, so they will need to be re-stepped at the proper rake. 5. The netting for the hammock storage has some minor dings. Other than that, I believe, the model is in good shape and I hope to complete the model in a way that properly honors Carson's father. I know there are many folks here on MSW that have extensive experience with the Constitution and perhaps the Blue Jacket kit itself. So please do not hesitate to offer comments, critiques, and suggestions. I welcome it all. Following are pictures that show the current state of the model. I’ll start with my favorite which shows all the damage to the bowsprit assembly. Yet Old Glory survives and still waves proudly above it all!

Fantastic job on that net! Very well done and your choice of material was spot on.

"DonKeith Oaty". I'm dying!!! 🤣🤣🤣

Yes, Keith! Definitely a better shade of boxcar red. At least for my eye.

That's what we do!

I think the burnt sienna is too brown if you are trying for boxcar red. I envision it more red than brown like the pics below. I would do a base of a reddish-brown (a bit more more red than brown) and add some weathering techniques.

Epic save, Steven! Looks great.

The tarmac and the figure really make a nice presentation. Wonderful job, Mike!

Hey Bob. You've overcome things that are a whole lot tougher than a piece of upside down photo-etch! I doubt anyone would have noticed had you not pointed it out.

I just discovered this build log and got caught up on it. You really are a master with paint. I have learned so much from you. Also, the landing gear build was superlative. Well, done, Mike!

Beautiful work, Peter! Very impressive!!

She is looking grand, Bob. Full speed ahead! BTW, does PFC Pile have his cousin Goober hiding in the shop somewhere?

That bare hull is a work of art!