Jump to content

Jay 1

NRG Member
  • Posts

    611
  • Joined

  • Last visited

Everything posted by Jay 1

  1. Like the others, glad some time became available for you, Russ--it's always a pleasure to look at your excellent work! Jay
  2. Wow you're compass is great, Micheal--your build gets more amazing each time I drop in for an update! I'm with Mark on the contrasting colors--am thinking the oil may be a nice choice. Cheers, Jay
  3. Robbyn & Sam, I nearly forgot about Sam's question on mask filters. Material Safety Data Sheets (MSDS) are your go-to sources for personal protection when it comes to chemicals and etc.--just Google a product or generic name and include MSDS in the search criteria; you'll get a lot of hits on what you're looking for. Organic vapor filters will provide a wider spectrum of protection (i.e., more bang for your buck) and are recommended for CA. Mask filters are sorta like condoms, you'll never go wrong with having too much protection! When you're not using a mask, store it in a ziplock bag with as much air pushed out as possible. Replace your filters according to the mfg.'s recommendation (usually six months to a year, with some variables). Organic filters are more expensive but in comparison to one's health, they're a bargain! Cheers, Jay
  4. Happy Birthday, Jim--wishing you and Donna a wonderful day of celebration! Jay
  5. Dan, the Mark (Mk) and Mod numbers specifically ID the gun ( see: http://www.navweaps.com/Weapons/WNUS_4-50_mk9.htm ). The additional numbers below can be for a couple of possible things: tube serial numbers, lot numbers, or re-work IDs (tubes that have been fired a lot will get re-worked and then are returned to service, usually they are marked with IDs). However, the numbers you really care about are Mk & Mods--those specifically identify a gun, so check those out in the NAVWEPS link and play with Google as well. Cheers, Jay
  6. Congratulation, Robbyn!!! She's a beauty--you did a wonderful job! It's a great feeling--I imagine you're spending some time admiring you excellent work?! Cheers! Jay
  7. Great work Robbyn--a very fine looking longboat! Looking forward to your Syren! Oh, btw if you purchase a half face respirator, be sure to get organic filters and use them in the mask otherwise you're not protected from the vapors of most chemicals we work with. Jay
  8. Michael, just caught up with your build; your work is as beautiful as ever--fantastic metal metal work! Jay
  9. I'll look forward to your purchasing the round trip airline ticket to Oz for me to come over and cover your books, Brian--always have wanted to visit down under! Jay
  10. Gary, good strategy with the email--I was laughing aloud when I read that! Many thanks, Hamilton! Jay
  11. Thanks, Gary! Was thinking about admirals and what they may know or may not know about one's book spending when I wrote that paragraph...harmony and full disclosure don't always go hand-in-hand... Maybe put full disclosure down on paper somewhere safe and just occasionally drop mention that your books will be worth a bit in the future! Jay
  12. How often do we spend a handsome sum on either a great new or out-of-print second-hand shipbuilding book? I’m sure many of us have a nice collection of shipbuilding references on our shelves; however, how many of us know about protecting our book’s dust jackets (often called dust wrappers in the UK and elsewhere)? You may be asking, “Why would I want to go to the bother and expense of putting a cover over my book dust jackets?” It’s a good and fair question to ask! Good Mylar covers, with archival paper inserts, are wonderful for protecting your book’s dust jackets when they are either on or off your books or when you're taking your books off or putting them back onto your book shelves. In addition to protecting your book dust jackets, the condition of a book’s dust jacket has a direct bearing on a book’s resale value, which is known to most book dealers but not most folks—this is something I learned along the way as a long-time collector (and reader) of literary first editions. If your dust jackets are covered, you can count on getting better prices from book dealers if you choose to sell your books. I won’t go into the ins and outs of book or dust jacket grading, but the protection does help add to or maintain a collectible book’s value. Because model shipbuilding is a relatively small, niche market good books often go out-of-print. If you’re serious into obtaining a good shipbuilding reference library, you’ve probably learned that many of the classic, must have books, are out-of-print. Likewise, some current, excellent in-print references will also likely go out-of-print in time. In either case, these out-of-print classics are often difficult to find and are expensive. Therefore, Mylar covers are excellent choices for protecting your investment. Additionally, in most cases, our books will long outlive us. Thus protecting these classic work’s dust jackets is one way to ensure that these classics are in good condition when they are passed on to future hands. Lastly, in my opinion, a book just simply looks good when it's protected with a Mylar cover! Before I go on further, I want to mention here that it’s also a very good idea to document someplace in your personal papers which books of yours are valuable. Why? It’s so that your next-of-kin can know the value of your collection and hopefully not give your references away or sell them for a song because they think these obscure books aren’t worth much (for example, if you have Sim Comfort’s edition of Steel’s Naval Architecture…do you really want it going onto eBay for $1.00?). Back to Mylar covers: these are relatively inexpensive. Although you can buy specific cover sizes to fit your books, it’s much more economical to buy Mylar covering by the roll (Amazon). I also suggest you get a large size because you can always fold larger sizes down to fit smaller dust jackets. While they’re not essential, I also recommend purchasing a “bone knife” (Amazon). These are used for creasing a cover’s folds and make that task much easier. The knife doesn’t actually have to be made from bone—it just has to be able to slide easily along a cover and create a good, sharp fold or make a new fold if you’ve made an error with sizing the cover over a dust jacket. As you can see in the photos I’ve included, putting Mylar covers over dust jackets is straightforward if you’ve never used them before. However, there is one caveat. Jackets often will tend to move away from the bottom of a cover at the cover’s outer right and left ends. To deal with this, fold over, but don’t yet crease down the fold, at either a cover's right or left side. Then push the jacket back down to seat it at the bottom of the cover on that side (lift the bottom cover edge up on that side to make sure the jacket is seated) and then make about a 2” (~5cm) crease with a bone knife along the temporary fold you've made on that side of the cover. Then weight down that side of the cover with a book to hold the dust jacket and partially creased cover in place. Then seat the dust jacket on the other side. You can now crease the entire edge of the fold. If you didn’t quite get it right, just redo it—with a bone knife, re-doing creases is generally easy and the new creases will generally come out well. Note: When covering dust jackets, it's usually done with the cover facing down and in between the Mylar and the archival paper like you see in the 3rd photo below. You can see here how the right and left edges of a dust jacket tend to not seat against the bottom of a cover: Here's what a bone knife looks like: The dust jacket is now fully seated in the cover: The finished cover: Cheers, Jay
  13. Your chain plates sound like they were a pain and health hazard! Hope you're feeling better mi amiga! An alternative to kit wire is black annealed steel wire made by Hilman; it comes in a variety of gauges, is inexpensive (about $4 for a 50' coil), and generally silver solders well. While I don't often use it, 5 minute epoxy is great for jobs that really need to hold--not sure if the smell will also cause a reaction for you Robbyn but it's worth a try given your experiences with CA. Jay
  14. To add to Druxey's excellent suggestions, I'd include wearing a half-face respirator w/ organic filters when working with acetone, particularly if the ventilation is a fan or etc. along with being very aware, and wary, of acetone's very low flash point! Jay
  15. You're welcome, Jud--yep, the gun was before my time too! While weapons themselves weren't what we focused on when I was in EOD, we knew and understood them well enough to be general menaces to GMs/GMGs, AOs, and mortar/artillery crews--lol. The ordnance, explosives, and etc. were really our bailiwick. Yep, smaller bore guns usually fired fixed ammo though in the early days it wasn't uncommon for large field artillery pieces to use fixed ammo too (some of the brass cases from World War 1 are amazing to see--saw some stunning examples in France a few years back). It's been a few moons since I researched an older weapons system, and it was nice to see a few of the key unclass pubs on the web and share them! Jay
  16. Hi Dan, Based on my 20+ years of experience as an US Explosive Ordnance Disposal technician, I'd say it's a World War 1 through 1940s era Navy 4" / 50. The gun was used on a variety of vessels during that period (guns as opposed to artillery, generally have more elongated rifling and thus fire flatter trajectories and were used on both shore and ships, to include submarine deck guns). Although a weapons system may be date stamped, that stamp does not limit the system to being used strictly during that time frame--that's why I gave a wide time span above. Here's a link to Wikipedia that has some info. on 4" / 50s: http://en.wikipedia.org/wiki/4%22/50_caliber_gun And here's a NAVWEPS link: http://www.navweaps.com/Weapons/WNUS_4-50_mk9_pics.htm Here's the cross ref from the MK XII Mod 1 carriage to the gun: Historic Naval Ships Visitors Guide - Gun Mount and Turret Catalog.pdf If the scout does some digging on the shells used in the gun (he'll need to find out the MK numbers and, as applicable, the Mod number(s) used in the piece; general info. won't be as easy to cross reference / research), he can likely find out detailed specifics on shells (the correct term is "projectiles," our slang term in EOD was "projo," which my spell check hates ) in the projo chapter (Ch. 1, 4" projos) of OP 1664: http://www.hnsa.org/doc/ordnance/index.htm As an afterthought, here's the detailed info. on 4" / 50s from NAVWEPS: http://www.navweaps.com/Weapons/WNUS_4-50_mk9.htm Cheers, Jay
  17. Chris, my copy arrived last night and you're spot on, and I'm in total agreement with you--it's a phenomenal work to say the least! Needless to say, I didn't get to bed until way late last night! And if your wife did get you Frolich, mmmm buddy you're in for a treat--it's a stunningly excellent work (that one that has also kept me up into the wee hours)! As a supplement to Frolich's book, here's a link to his website: http://modelisme.arsenal.free.fr/artdumodelisme/indexgb.html Cheers, Jay
×
×
  • Create New...