chris watton

I wasn't going to do it just yet, it was way further down the list, but Mary Montagu-Scott, the  Trustee of Buckler’s Hard Shipyard Trust, convinced me, so I will have their logo on the kit box too. They are currently excavating the building slip where the Agamemnon was built, and she has big plans for the future of this historical site.

Not all all!  In fact, I am always filled with self doubt, wondering if I have done the right thing/gone too far and wondering if each new release will sell. I don't take anything for granted. I just strive to do my best, utilising the knowledge I have accumulated over the decades, and designing the kits in a way that if I were buying it, I would be more than happy with it. The only issue for me is the fact that these complex kits take a very long time to produce due to the sheer amount of cut/engraved parts. But if people enjoy the kits, for me, it is all worth it, as a kit should be a joy to build, not a chore.
I don't really know much about this Surprise. My time there seems like many lifetimes ago, and that Surprise is well after my time there. (I was there from 1994 until late 2001, with the Nelson's Navy range starting in 1998 with Diana). 
 
Surprise is definitely the largest kit I can do that has no planking at all from the top of the main wale position up, above this, everything is laser cut/engraved - no cutting out the gun ports.  For this kit, I have had to order some very expensive pear sheets, 0.8x150x800mm, for the inner and outer bulwarks. As there are no fenders, the parts are full length as there is nothing along the sides to break this up.
 
I think I have another 2 months’ work on Surprise (CAD plans etc. plus I am still waiting for a couple of final things like stern lantern and Aubrey and Maturin) and in the meantime, start production and after this, make a start on Agamemnon, a subject I always meant to revisit and do it full justice. (I hope)
 

Not all all!  In fact, I am always filled with self doubt, wondering if I have done the right thing/gone too far and wondering if each new release will sell. I don't take anything for granted. I just strive to do my best, utilising the knowledge I have accumulated over the decades, and designing the kits in a way that if I were buying it, I would be more than happy with it. The only issue for me is the fact that these complex kits take a very long time to produce due to the sheer amount of cut/engraved parts. But if people enjoy the kits, for me, it is all worth it, as a kit should be a joy to build, not a chore.
I don't really know much about this Surprise. My time there seems like many lifetimes ago, and that Surprise is well after my time there. (I was there from 1994 until late 2001, with the Nelson's Navy range starting in 1998 with Diana). 
 
Surprise is definitely the largest kit I can do that has no planking at all from the top of the main wale position up, above this, everything is laser cut/engraved - no cutting out the gun ports.  For this kit, I have had to order some very expensive pear sheets, 0.8x150x800mm, for the inner and outer bulwarks. As there are no fenders, the parts are full length as there is nothing along the sides to break this up.
 
I think I have another 2 months’ work on Surprise (CAD plans etc. plus I am still waiting for a couple of final things like stern lantern and Aubrey and Maturin) and in the meantime, start production and after this, make a start on Agamemnon, a subject I always meant to revisit and do it full justice. (I hope)
 

Not all all!  In fact, I am always filled with self doubt, wondering if I have done the right thing/gone too far and wondering if each new release will sell. I don't take anything for granted. I just strive to do my best, utilising the knowledge I have accumulated over the decades, and designing the kits in a way that if I were buying it, I would be more than happy with it. The only issue for me is the fact that these complex kits take a very long time to produce due to the sheer amount of cut/engraved parts. But if people enjoy the kits, for me, it is all worth it, as a kit should be a joy to build, not a chore.
I don't really know much about this Surprise. My time there seems like many lifetimes ago, and that Surprise is well after my time there. (I was there from 1994 until late 2001, with the Nelson's Navy range starting in 1998 with Diana). 
 
Surprise is definitely the largest kit I can do that has no planking at all from the top of the main wale position up, above this, everything is laser cut/engraved - no cutting out the gun ports.  For this kit, I have had to order some very expensive pear sheets, 0.8x150x800mm, for the inner and outer bulwarks. As there are no fenders, the parts are full length as there is nothing along the sides to break this up.
 
I think I have another 2 months’ work on Surprise (CAD plans etc. plus I am still waiting for a couple of final things like stern lantern and Aubrey and Maturin) and in the meantime, start production and after this, make a start on Agamemnon, a subject I always meant to revisit and do it full justice. (I hope)
 

I wasn't going to do it just yet, it was way further down the list, but Mary Montagu-Scott, the  Trustee of Buckler’s Hard Shipyard Trust, convinced me, so I will have their logo on the kit box too. They are currently excavating the building slip where the Agamemnon was built, and she has big plans for the future of this historical site.

I wasn't going to do it just yet, it was way further down the list, but Mary Montagu-Scott, the  Trustee of Buckler’s Hard Shipyard Trust, convinced me, so I will have their logo on the kit box too. They are currently excavating the building slip where the Agamemnon was built, and she has big plans for the future of this historical site.

Not all all!  In fact, I am always filled with self doubt, wondering if I have done the right thing/gone too far and wondering if each new release will sell. I don't take anything for granted. I just strive to do my best, utilising the knowledge I have accumulated over the decades, and designing the kits in a way that if I were buying it, I would be more than happy with it. The only issue for me is the fact that these complex kits take a very long time to produce due to the sheer amount of cut/engraved parts. But if people enjoy the kits, for me, it is all worth it, as a kit should be a joy to build, not a chore.
I don't really know much about this Surprise. My time there seems like many lifetimes ago, and that Surprise is well after my time there. (I was there from 1994 until late 2001, with the Nelson's Navy range starting in 1998 with Diana). 
 
Surprise is definitely the largest kit I can do that has no planking at all from the top of the main wale position up, above this, everything is laser cut/engraved - no cutting out the gun ports.  For this kit, I have had to order some very expensive pear sheets, 0.8x150x800mm, for the inner and outer bulwarks. As there are no fenders, the parts are full length as there is nothing along the sides to break this up.
 
I think I have another 2 months’ work on Surprise (CAD plans etc. plus I am still waiting for a couple of final things like stern lantern and Aubrey and Maturin) and in the meantime, start production and after this, make a start on Agamemnon, a subject I always meant to revisit and do it full justice. (I hope)
 

I wasn't going to do it just yet, it was way further down the list, but Mary Montagu-Scott, the  Trustee of Buckler’s Hard Shipyard Trust, convinced me, so I will have their logo on the kit box too. They are currently excavating the building slip where the Agamemnon was built, and she has big plans for the future of this historical site.

I wasn't going to do it just yet, it was way further down the list, but Mary Montagu-Scott, the  Trustee of Buckler’s Hard Shipyard Trust, convinced me, so I will have their logo on the kit box too. They are currently excavating the building slip where the Agamemnon was built, and she has big plans for the future of this historical site.

Not all all!  In fact, I am always filled with self doubt, wondering if I have done the right thing/gone too far and wondering if each new release will sell. I don't take anything for granted. I just strive to do my best, utilising the knowledge I have accumulated over the decades, and designing the kits in a way that if I were buying it, I would be more than happy with it. The only issue for me is the fact that these complex kits take a very long time to produce due to the sheer amount of cut/engraved parts. But if people enjoy the kits, for me, it is all worth it, as a kit should be a joy to build, not a chore.
I don't really know much about this Surprise. My time there seems like many lifetimes ago, and that Surprise is well after my time there. (I was there from 1994 until late 2001, with the Nelson's Navy range starting in 1998 with Diana). 
 
Surprise is definitely the largest kit I can do that has no planking at all from the top of the main wale position up, above this, everything is laser cut/engraved - no cutting out the gun ports.  For this kit, I have had to order some very expensive pear sheets, 0.8x150x800mm, for the inner and outer bulwarks. As there are no fenders, the parts are full length as there is nothing along the sides to break this up.
 
I think I have another 2 months’ work on Surprise (CAD plans etc. plus I am still waiting for a couple of final things like stern lantern and Aubrey and Maturin) and in the meantime, start production and after this, make a start on Agamemnon, a subject I always meant to revisit and do it full justice. (I hope)
 

Not all all!  In fact, I am always filled with self doubt, wondering if I have done the right thing/gone too far and wondering if each new release will sell. I don't take anything for granted. I just strive to do my best, utilising the knowledge I have accumulated over the decades, and designing the kits in a way that if I were buying it, I would be more than happy with it. The only issue for me is the fact that these complex kits take a very long time to produce due to the sheer amount of cut/engraved parts. But if people enjoy the kits, for me, it is all worth it, as a kit should be a joy to build, not a chore.
I don't really know much about this Surprise. My time there seems like many lifetimes ago, and that Surprise is well after my time there. (I was there from 1994 until late 2001, with the Nelson's Navy range starting in 1998 with Diana). 
 
Surprise is definitely the largest kit I can do that has no planking at all from the top of the main wale position up, above this, everything is laser cut/engraved - no cutting out the gun ports.  For this kit, I have had to order some very expensive pear sheets, 0.8x150x800mm, for the inner and outer bulwarks. As there are no fenders, the parts are full length as there is nothing along the sides to break this up.
 
I think I have another 2 months’ work on Surprise (CAD plans etc. plus I am still waiting for a couple of final things like stern lantern and Aubrey and Maturin) and in the meantime, start production and after this, make a start on Agamemnon, a subject I always meant to revisit and do it full justice. (I hope)
 

Come on, Chris, just add another deck to the Indy, and no-one will be the wiser ... Easy-Peasy, lemon squeezy!
😇
 
(The preceding was a joke.)

I wasn't going to do it just yet, it was way further down the list, but Mary Montagu-Scott, the  Trustee of Buckler’s Hard Shipyard Trust, convinced me, so I will have their logo on the kit box too. They are currently excavating the building slip where the Agamemnon was built, and she has big plans for the future of this historical site.

I wasn't going to do it just yet, it was way further down the list, but Mary Montagu-Scott, the  Trustee of Buckler’s Hard Shipyard Trust, convinced me, so I will have their logo on the kit box too. They are currently excavating the building slip where the Agamemnon was built, and she has big plans for the future of this historical site.

Finished the windlass. Gears are from a micro servo. Most are plastic.



 

I wasn't going to do it just yet, it was way further down the list, but Mary Montagu-Scott, the  Trustee of Buckler’s Hard Shipyard Trust, convinced me, so I will have their logo on the kit box too. They are currently excavating the building slip where the Agamemnon was built, and she has big plans for the future of this historical site.

Not all all!  In fact, I am always filled with self doubt, wondering if I have done the right thing/gone too far and wondering if each new release will sell. I don't take anything for granted. I just strive to do my best, utilising the knowledge I have accumulated over the decades, and designing the kits in a way that if I were buying it, I would be more than happy with it. The only issue for me is the fact that these complex kits take a very long time to produce due to the sheer amount of cut/engraved parts. But if people enjoy the kits, for me, it is all worth it, as a kit should be a joy to build, not a chore.
I don't really know much about this Surprise. My time there seems like many lifetimes ago, and that Surprise is well after my time there. (I was there from 1994 until late 2001, with the Nelson's Navy range starting in 1998 with Diana). 
 
Surprise is definitely the largest kit I can do that has no planking at all from the top of the main wale position up, above this, everything is laser cut/engraved - no cutting out the gun ports.  For this kit, I have had to order some very expensive pear sheets, 0.8x150x800mm, for the inner and outer bulwarks. As there are no fenders, the parts are full length as there is nothing along the sides to break this up.
 
I think I have another 2 months’ work on Surprise (CAD plans etc. plus I am still waiting for a couple of final things like stern lantern and Aubrey and Maturin) and in the meantime, start production and after this, make a start on Agamemnon, a subject I always meant to revisit and do it full justice. (I hope)
 

I wasn't going to do it just yet, it was way further down the list, but Mary Montagu-Scott, the  Trustee of Buckler’s Hard Shipyard Trust, convinced me, so I will have their logo on the kit box too. They are currently excavating the building slip where the Agamemnon was built, and she has big plans for the future of this historical site.

OK, I have now completed what I need to for the designs. The 'mule' is finished, no need to garner any more info from it - and here she is. No varnish, paint and much abused, Jim's model will have much more finesse (and colour).
I knew I was close to the finishing line (designs) for this, so I was up most of the night, and then all of today to complete it - now I can relax a little before starting the CAD drawings for plans..
 

Not all all!  In fact, I am always filled with self doubt, wondering if I have done the right thing/gone too far and wondering if each new release will sell. I don't take anything for granted. I just strive to do my best, utilising the knowledge I have accumulated over the decades, and designing the kits in a way that if I were buying it, I would be more than happy with it. The only issue for me is the fact that these complex kits take a very long time to produce due to the sheer amount of cut/engraved parts. But if people enjoy the kits, for me, it is all worth it, as a kit should be a joy to build, not a chore.
I don't really know much about this Surprise. My time there seems like many lifetimes ago, and that Surprise is well after my time there. (I was there from 1994 until late 2001, with the Nelson's Navy range starting in 1998 with Diana). 
 
Surprise is definitely the largest kit I can do that has no planking at all from the top of the main wale position up, above this, everything is laser cut/engraved - no cutting out the gun ports.  For this kit, I have had to order some very expensive pear sheets, 0.8x150x800mm, for the inner and outer bulwarks. As there are no fenders, the parts are full length as there is nothing along the sides to break this up.
 
I think I have another 2 months’ work on Surprise (CAD plans etc. plus I am still waiting for a couple of final things like stern lantern and Aubrey and Maturin) and in the meantime, start production and after this, make a start on Agamemnon, a subject I always meant to revisit and do it full justice. (I hope)
 

Man...a revised Agamemnon...that's going to be an epic kit 🤩

Not all all!  In fact, I am always filled with self doubt, wondering if I have done the right thing/gone too far and wondering if each new release will sell. I don't take anything for granted. I just strive to do my best, utilising the knowledge I have accumulated over the decades, and designing the kits in a way that if I were buying it, I would be more than happy with it. The only issue for me is the fact that these complex kits take a very long time to produce due to the sheer amount of cut/engraved parts. But if people enjoy the kits, for me, it is all worth it, as a kit should be a joy to build, not a chore.
I don't really know much about this Surprise. My time there seems like many lifetimes ago, and that Surprise is well after my time there. (I was there from 1994 until late 2001, with the Nelson's Navy range starting in 1998 with Diana). 
 
Surprise is definitely the largest kit I can do that has no planking at all from the top of the main wale position up, above this, everything is laser cut/engraved - no cutting out the gun ports.  For this kit, I have had to order some very expensive pear sheets, 0.8x150x800mm, for the inner and outer bulwarks. As there are no fenders, the parts are full length as there is nothing along the sides to break this up.
 
I think I have another 2 months’ work on Surprise (CAD plans etc. plus I am still waiting for a couple of final things like stern lantern and Aubrey and Maturin) and in the meantime, start production and after this, make a start on Agamemnon, a subject I always meant to revisit and do it full justice. (I hope)
 

Not all all!  In fact, I am always filled with self doubt, wondering if I have done the right thing/gone too far and wondering if each new release will sell. I don't take anything for granted. I just strive to do my best, utilising the knowledge I have accumulated over the decades, and designing the kits in a way that if I were buying it, I would be more than happy with it. The only issue for me is the fact that these complex kits take a very long time to produce due to the sheer amount of cut/engraved parts. But if people enjoy the kits, for me, it is all worth it, as a kit should be a joy to build, not a chore.
I don't really know much about this Surprise. My time there seems like many lifetimes ago, and that Surprise is well after my time there. (I was there from 1994 until late 2001, with the Nelson's Navy range starting in 1998 with Diana). 
 
Surprise is definitely the largest kit I can do that has no planking at all from the top of the main wale position up, above this, everything is laser cut/engraved - no cutting out the gun ports.  For this kit, I have had to order some very expensive pear sheets, 0.8x150x800mm, for the inner and outer bulwarks. As there are no fenders, the parts are full length as there is nothing along the sides to break this up.
 
I think I have another 2 months’ work on Surprise (CAD plans etc. plus I am still waiting for a couple of final things like stern lantern and Aubrey and Maturin) and in the meantime, start production and after this, make a start on Agamemnon, a subject I always meant to revisit and do it full justice. (I hope)
 

Not all all!  In fact, I am always filled with self doubt, wondering if I have done the right thing/gone too far and wondering if each new release will sell. I don't take anything for granted. I just strive to do my best, utilising the knowledge I have accumulated over the decades, and designing the kits in a way that if I were buying it, I would be more than happy with it. The only issue for me is the fact that these complex kits take a very long time to produce due to the sheer amount of cut/engraved parts. But if people enjoy the kits, for me, it is all worth it, as a kit should be a joy to build, not a chore.
I don't really know much about this Surprise. My time there seems like many lifetimes ago, and that Surprise is well after my time there. (I was there from 1994 until late 2001, with the Nelson's Navy range starting in 1998 with Diana). 
 
Surprise is definitely the largest kit I can do that has no planking at all from the top of the main wale position up, above this, everything is laser cut/engraved - no cutting out the gun ports.  For this kit, I have had to order some very expensive pear sheets, 0.8x150x800mm, for the inner and outer bulwarks. As there are no fenders, the parts are full length as there is nothing along the sides to break this up.
 
I think I have another 2 months’ work on Surprise (CAD plans etc. plus I am still waiting for a couple of final things like stern lantern and Aubrey and Maturin) and in the meantime, start production and after this, make a start on Agamemnon, a subject I always meant to revisit and do it full justice. (I hope)
 

Not all all!  In fact, I am always filled with self doubt, wondering if I have done the right thing/gone too far and wondering if each new release will sell. I don't take anything for granted. I just strive to do my best, utilising the knowledge I have accumulated over the decades, and designing the kits in a way that if I were buying it, I would be more than happy with it. The only issue for me is the fact that these complex kits take a very long time to produce due to the sheer amount of cut/engraved parts. But if people enjoy the kits, for me, it is all worth it, as a kit should be a joy to build, not a chore.
I don't really know much about this Surprise. My time there seems like many lifetimes ago, and that Surprise is well after my time there. (I was there from 1994 until late 2001, with the Nelson's Navy range starting in 1998 with Diana). 
 
Surprise is definitely the largest kit I can do that has no planking at all from the top of the main wale position up, above this, everything is laser cut/engraved - no cutting out the gun ports.  For this kit, I have had to order some very expensive pear sheets, 0.8x150x800mm, for the inner and outer bulwarks. As there are no fenders, the parts are full length as there is nothing along the sides to break this up.
 
I think I have another 2 months’ work on Surprise (CAD plans etc. plus I am still waiting for a couple of final things like stern lantern and Aubrey and Maturin) and in the meantime, start production and after this, make a start on Agamemnon, a subject I always meant to revisit and do it full justice. (I hope)