Jeronimo
-
Posts
716 -
Joined
-
Last visited
Reputation Activity
-
Jeronimo reacted to Bitao in NAIAD 1797 by Bitao - 1:60
Thank you for your constant attention. The next target has not been set. As a hobby, my models are not limited to building sailboats. Take the time to make another model my like.
-
Jeronimo reacted to Keith Black in NAIAD 1797 by Bitao - 1:60
Beautiful ship's wheel, Bitao, They're not easy to make, very well done.
-
Jeronimo reacted to Pirate adam in NAIAD 1797 by Bitao - 1:60
Bitao,
This is amazing work. Your craftsmanship is beyond most of us on the site, but I love seeing the limits of what is possible. It gives a lot of inspiration and ideas for techniques even for those of us not quite as skilled. This is one of the few models I have seen with the pump dales actually in place.
Adam
-
Jeronimo reacted to wefalck in MONTAÑES by Amalio
You should make a little film with a video-endoscope to appreaciate all this work !
-
-
Jeronimo reacted to dvm27 in NAIAD 1797 by Bitao - 1:60
I'm not quite sure how Bitao did it but I used the rotary table in my mill. I don't have DRO and just basically tinkered with the setup until it was right but it wasn't a big deal. I assume Bitao uses a round file to form the groove in the middle and either a form tool or file to shape the exposed side of the deadeye. The deadeye is pulled of, reversed and inserted onto the holes so the opposite side can be shaped.
-
-
-
Jeronimo got a reaction from billocrates in NAIAD 1797 by Bitao - 1:60
Hi Bitao.
I have seldom seen such a clean and perfectly built model.
Very good and wonderful work.
regards
Karl
Google Tranlator
-
Jeronimo got a reaction from billocrates in NAIAD 1797 by Bitao - 1:60
Hi Bitao,
beautiful work. Gratulation.
Karl
-
Jeronimo got a reaction from billocrates in NAIAD 1797 by Bitao - 1:60
Hello bitao.
You are doing a great job, very nice photos of the construction progress.
Compliement.
Karl
-
-
Jeronimo got a reaction from Brinkman in French 64 Gun Ship 1729 by Jeronimo
52 Frames provisionally aligned on the keel, not yet straightened.
I will build the remaining frames including the transom separately
and only then place them on the keel.
After all this fixed on the keel, I will first straighten ans sand the inside.
Karl
(Google Translator)
-
Jeronimo got a reaction from Mike Y in French 64 Gun Ship 1729 by Jeronimo
Hello modeling friends.
The model is planed according to the plan drawings of Gerard Delacroix, Le Fleuron 1729.
Scale: 1/60, Wood: Elsbeere (Sorbus torminalis).
I will build the model as "La Charpente", as shown in picture 0.01.
i.e. only the carpentry / joinnery,
without interior fittings and carving of the exterior.
Karl
(Google Translator)
-
Jeronimo got a reaction from botra288 in French 64 Gun Ship 1729 by Jeronimo
52 Frames provisionally aligned on the keel, not yet straightened.
I will build the remaining frames including the transom separately
and only then place them on the keel.
After all this fixed on the keel, I will first straighten ans sand the inside.
Karl
(Google Translator)
-
Jeronimo got a reaction from giampieroricci in French 64 Gun Ship 1729 by Jeronimo
52 Frames provisionally aligned on the keel, not yet straightened.
I will build the remaining frames including the transom separately
and only then place them on the keel.
After all this fixed on the keel, I will first straighten ans sand the inside.
Karl
(Google Translator)
-
Jeronimo got a reaction from druxey in French 64 Gun Ship 1729 by Jeronimo
52 Frames provisionally aligned on the keel, not yet straightened.
I will build the remaining frames including the transom separately
and only then place them on the keel.
After all this fixed on the keel, I will first straighten ans sand the inside.
Karl
(Google Translator)
-
Jeronimo got a reaction from Brinkman in French 64 Gun Ship 1729 by Jeronimo
Hello modeling friends.
The model is planed according to the plan drawings of Gerard Delacroix, Le Fleuron 1729.
Scale: 1/60, Wood: Elsbeere (Sorbus torminalis).
I will build the model as "La Charpente", as shown in picture 0.01.
i.e. only the carpentry / joinnery,
without interior fittings and carving of the exterior.
Karl
(Google Translator)
-
Jeronimo got a reaction from Seventynet in French 64 Gun Ship 1729 by Jeronimo
52 Frames provisionally aligned on the keel, not yet straightened.
I will build the remaining frames including the transom separately
and only then place them on the keel.
After all this fixed on the keel, I will first straighten ans sand the inside.
Karl
(Google Translator)
-
Jeronimo got a reaction from tlevine in French 64 Gun Ship 1729 by Jeronimo
52 Frames provisionally aligned on the keel, not yet straightened.
I will build the remaining frames including the transom separately
and only then place them on the keel.
After all this fixed on the keel, I will first straighten ans sand the inside.
Karl
(Google Translator)
-
Jeronimo got a reaction from botra288 in French 64 Gun Ship 1729 by Jeronimo
Hello modeling friends.
The model is planed according to the plan drawings of Gerard Delacroix, Le Fleuron 1729.
Scale: 1/60, Wood: Elsbeere (Sorbus torminalis).
I will build the model as "La Charpente", as shown in picture 0.01.
i.e. only the carpentry / joinnery,
without interior fittings and carving of the exterior.
Karl
(Google Translator)
-
Jeronimo got a reaction from mtaylor in French 64 Gun Ship 1729 by Jeronimo
52 Frames provisionally aligned on the keel, not yet straightened.
I will build the remaining frames including the transom separately
and only then place them on the keel.
After all this fixed on the keel, I will first straighten ans sand the inside.
Karl
(Google Translator)
-
Jeronimo got a reaction from dvm27 in French 64 Gun Ship 1729 by Jeronimo
52 Frames provisionally aligned on the keel, not yet straightened.
I will build the remaining frames including the transom separately
and only then place them on the keel.
After all this fixed on the keel, I will first straighten ans sand the inside.
Karl
(Google Translator)
-
Jeronimo got a reaction from ccoyle in French 64 Gun Ship 1729 by Jeronimo
52 Frames provisionally aligned on the keel, not yet straightened.
I will build the remaining frames including the transom separately
and only then place them on the keel.
After all this fixed on the keel, I will first straighten ans sand the inside.
Karl
(Google Translator)
-
Jeronimo got a reaction from CiscoH in French 64 Gun Ship 1729 by Jeronimo
52 Frames provisionally aligned on the keel, not yet straightened.
I will build the remaining frames including the transom separately
and only then place them on the keel.
After all this fixed on the keel, I will first straighten ans sand the inside.
Karl
(Google Translator)
Our Emblem ®
