Jeronimo Posted September 16, 2022 Share #1 Posted September 16, 2022 Hello modeling friends. The model is planed according to the plan drawings of Gerard Delacroix, Le Fleuron 1729. Scale: 1/60, Wood: Elsbeere (Sorbus torminalis). I will build the model as "La Charpente", as shown in picture 0.01. i.e. only the carpentry / joinnery, without interior fittings and carving of the exterior. Karl (Google Translator) Ainars, Seventynet, ccoyle and 20 others 21 1 1 Quote Link to comment Share on other sites More sharing options...
G. Delacroix Posted September 16, 2022 Share #2 Posted September 16, 2022 Hello, Nice work but be careful, the axis of the hawses must be parallel to the keel. GD Hubac's Historian, CiscoH, mtaylor and 4 others 6 1 Quote ___________________ Marine et modélisme d'arsenal Website Link to comment Share on other sites More sharing options...
Jeronimo Posted September 16, 2022 Author Share #3 Posted September 16, 2022 Hello Gerard. Thank you for the info. The mistake will be corrected. Karl druxey, mtaylor, CiscoH and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Jeronimo Posted September 28, 2022 Author Share #4 Posted September 28, 2022 (edited) 52 Frames provisionally aligned on the keel, not yet straightened. I will build the remaining frames including the transom separately and only then place them on the keel. After all this fixed on the keel, I will first straighten ans sand the inside. Karl (Google Translator) Edited September 28, 2022 by Jeronimo dvm27, G. Delacroix, scrubbyj427 and 13 others 13 3 Quote Link to comment Share on other sites More sharing options...
albert Posted September 28, 2022 Share #5 Posted September 28, 2022 Great beautiful work Jeronimo Jeronimo and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
Jeronimo Posted October 26, 2022 Author Share #6 Posted October 26, 2022 Stern part of the 64-gun ship mounted. I spare myself great explanations, most of the model building colleagues have more knowledge of the matter anway than I do, and the photos areclarify themselves. Karl (Google Translator) Nek0, allanyed, Seventynet and 13 others 15 1 Quote Link to comment Share on other sites More sharing options...
Nek0 Posted October 26, 2022 Share #7 Posted October 26, 2022 Great work !! Jeronimo and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
Jeronimo Posted October 28, 2022 Author Share #8 Posted October 28, 2022 My mistake Karl bruce d, mtaylor, druxey and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Jeronimo Posted November 1, 2022 Author Share #9 Posted November 1, 2022 Randsom wood, transom and frames 62 to 53 mounted. Frames lined on the inside. Schlempholz with its step fitted provisionally. The images / drawings show the 74 GunShip by Jean Boudriot, Volume 1, as an example. (Google Translator) Randsomholz, Heckbalken sowie Spanten 62 bis 53 montiert. Spanten innenseitig gestrakt. Schlempholz mit seinen Stufen provisorisch eingepasst. Die Bilder / Zeichnungen zeigen das 74 Kanonenschiff von Jean Boudriot, Volume 1, als Beispiel. Karl dvm27, Seventynet, albert and 10 others 11 2 Quote Link to comment Share on other sites More sharing options...
French Mr Bean Posted November 1, 2022 Share #10 Posted November 1, 2022 Very good work.....as usual ! mtaylor, Tobias, bruce d and 1 other 4 Quote Friendly, health and peace for all. Link to comment Share on other sites More sharing options...
Jeronimo Posted December 17, 2022 Author Share #11 Posted December 17, 2022 Hello. I have found some problems and errors in the construction of the model. It does not affect the whole structure, but it bothers me a lot and is annoying. I took a creative break and I decided to make a completely new start. This time in 1/48 scale. Ich habe einige Probleme und Fehler bei dem Bau des Modells gefunden. Es betrifft nicht die ganze Struktur, aber es stört mich schon gewaltig und ist ärgerlich. Ich machte eine schöpferische Pause und entschied mich dann für einen kompletten Neuanfang. Diesmal im Maßstab 1/48. Karl gjdale, CiscoH, allanyed and 14 others 12 5 Quote Link to comment Share on other sites More sharing options...
Wintergreen Posted January 3, 2023 Share #12 Posted January 3, 2023 On 12/17/2022 at 4:52 PM, Jeronimo said: I took a creative break and I decided to make a completely new start. Good grief! What a decision to make, to start over. But excellent start on the 1:48 🙂 Hubac's Historian, Jeronimo and mtaylor 3 Quote Happy modelling! Håkan __________________________________________ Current build: Atlantica by Wintergreen Previous builds Kågen by Wintergreen Regina by Wintergreen Sea of Galilee boat, first century, sort of... Billing Boats Wasa Gallery: Kågen (Cog, kaeg) by Wintergreen - 1:30, Billing Boats Regina - 1:30, Billing Boats Dana, Link to comment Share on other sites More sharing options...
druxey Posted January 3, 2023 Share #13 Posted January 3, 2023 Well, that is bold! Also, 1:48 will be easier to build, I think. The beginning of the new model looks great. Jeronimo, mtaylor and Hubac's Historian 3 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv Link to comment Share on other sites More sharing options...
Hubac's Historian Posted January 3, 2023 Share #14 Posted January 3, 2023 May I ask - what were the main issues that prompted you to start over? Jeronimo and mtaylor 2 Quote We are all works in progress, all of the time. Link to comment Share on other sites More sharing options...
rcmdrvr Posted January 3, 2023 Share #15 Posted January 3, 2023 What a shock to scroll thru so many photos of great work and then find you are starting over. May I ask how you fashion each rib. Bandsaw? Drum sander? mtaylor and Jeronimo 2 Quote Completed Builds: USS Cairo by BlueJacket; Nave Egizia by Amati; Harriet Lane by Model Shipways Link to comment Share on other sites More sharing options...
Jeronimo Posted January 6, 2023 Author Share #16 Posted January 6, 2023 On 1/3/2023 at 7:11 PM, Hubac's Historian said: Darf ich fragen - was waren die Hauptprobleme, die Sie dazu veranlasst haben, neu anzufangen? Hallo, einige Unregelmäßigkeiten bei dem Bau der Spanten, (mein Fehler) und zu spät bemerkt, der doch etwas kleine Maßstab 1/60, haben mich veranlasst den Bau im Maßstab 1/48 zu machen. Karl (Entschuldigung für die Erklärung in Deutsch) Wintergreen 1 Quote Link to comment Share on other sites More sharing options...
Jeronimo Posted January 6, 2023 Author Share #17 Posted January 6, 2023 On 1/3/2023 at 7:20 PM, rcmdrvr said: Was für ein Schock, durch so viele Fotos von großartiger Arbeit zu scrollen und dann festzustellen, dass Sie von vorne anfangen. Darf ich fragen, wie Sie jede Rippe formen. Bandsäge? Trommelschleifer? Hallo. Die einzelnen Teile der Spanten mit der Dekupiersäge ausgeschnitten, Zusammenbau und mit Rundschleifer in die endgültige Form geschliffen. Karl Wintergreen and rcmdrvr 2 Quote Link to comment Share on other sites More sharing options...
Hubac's Historian Posted January 6, 2023 Share #18 Posted January 6, 2023 Das ist bedauerlich. Ich freue mich, dass Sie an Ihren Bemühungen festhalten. Jeronimo and mtaylor 2 Quote We are all works in progress, all of the time. Link to comment Share on other sites More sharing options...
Jeronimo Posted January 7, 2023 Author Share #19 Posted January 7, 2023 Bow, scale 1/48 Cant Frames mounted on frame 1. Thank you very much for the comments, please keep it up, criticism is also welcome and helps me. Greetings Karl GrandpaPhil, botra288, gjdale and 10 others 9 4 Quote Link to comment Share on other sites More sharing options...
French Mr Bean Posted January 7, 2023 Share #20 Posted January 7, 2023 Very good job, nice color. mtaylor and Jeronimo 2 Quote Friendly, health and peace for all. Link to comment Share on other sites More sharing options...
Jeronimo Posted January 28, 2023 Author Share #21 Posted January 28, 2023 Bow part with the first twelve frames attached to the keel. tracted inside and sanded. Binnen-Vorsteven provisionally installed. Karl KLarsen, Mic_Nao, Paryzek and 14 others 17 Quote Link to comment Share on other sites More sharing options...
Mic_Nao Posted January 28, 2023 Share #22 Posted January 28, 2023 Very good start Karl. To be continued. mtaylor and Jeronimo 2 Quote The best aperitif is not necessarily the most expensive, it's the one we share! https://modelshipworld.com/topic/34058-frigate-l-egyptienne-1799-scale-148-by-mic_nao/#comment-969607 Link to comment Share on other sites More sharing options...
Ainars Posted March 17, 2023 Share #23 Posted March 17, 2023 Incredibly great work, Karl. mtaylor and Jeronimo 2 Quote Link to comment Share on other sites More sharing options...
druxey Posted March 24, 2023 Share #24 Posted March 24, 2023 Just catching up on your build. Very lovely so far. Jeronimo and mtaylor 2 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv Link to comment Share on other sites More sharing options...
albert Posted March 27, 2023 Share #25 Posted March 27, 2023 Great beautiful work Karl. mtaylor 1 Quote Link to comment Share on other sites More sharing options...
Jeronimo Posted March 29, 2023 Author Share #26 Posted March 29, 2023 21 hours ago, Thomas Rauzy said: Hallo Karl? Tolle Arbeit. Ich frage mich allerdings, ob Sie verstanden haben, wie Rahmen gebaut wurden. G. Delacroix ist nicht explizit darüber, aber die Rahmen wurden paarweise zusammengesetzt, wobei sich überlappende Teile gegenseitig verstärkten. Schauen Sie sich das Bild an. Es stammt aus der Abhandlung von Duhamel du Monceau und damit zu einem späteren Zeitpunkt als Le Fleurons Konstruktion. Damals und entgegen den Plänen von G. Delacroix wurde der höchste Teil der Rahmen, der auf Französisch "allonge de revers" genannt wird (ich kann keine Übersetzung auf Englisch finden, möglicherweise Rahmenoberseite mit umgekehrter Krümmung), nicht verdoppelt. Ich füge ein weiteres Bild als Beispiel hinzu. Grüße Thomas Hello Thomas, where is the problem? Karl scrubbyj427, bruce d, G. Delacroix and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Jeronimo Posted April 22, 2023 Author Share #27 Posted April 22, 2023 Figurehead, 64 Gun Ship, Scale 1/48 Karl Keith Black, mtaylor, davyboy and 13 others 9 7 Quote Link to comment Share on other sites More sharing options...
Jeronimo Posted April 28, 2023 Author Share #28 Posted April 28, 2023 (edited) Aufbau der Rahmen. 52 von 62 Rahmen auf grob geschliffenem montiert. Karl Edited April 28, 2023 by Jeronimo GrandpaPhil, druxey, Isaiah and 14 others 14 3 Quote Link to comment Share on other sites More sharing options...
Isaiah Posted May 20, 2023 Share #29 Posted May 20, 2023 Wow, coming from a complete beginner like myself this looks incredible. I’m sure this takes some serious dedication and skill. Looking forward to seeing the rest. Isaiah. Jeronimo, mtaylor and druxey 3 Quote Current build: HM Cutter Sherbourne 1763 by Isaiah - Vanguard models - 1:64 Completed Builds: Perseverance -1807 - by Isaiah - 1:48 - Colonial Brig Link to comment Share on other sites More sharing options...
druxey Posted May 20, 2023 Share #30 Posted May 20, 2023 Nice results so far! Jeronimo and mtaylor 2 Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.