UdoK

Seems that I'am one of the first who opens a buildlog of the CAF Le Coureur kit..
 
Unlike other buildlogs I will not start with a extensive kit review since this can be seen in other threads, like the one from CAF
My kit has been arrived after 6 days from the reception of the shipping notification to door delivery, very fast!
The kit was very well packed to ensure a safe transport.
 
Before the construction starts, here are a few thoughts as per today about my intentions on how to show the model.
I will try to display the Coureur as she appeared in 1776, just before the capture of the English navy.
For reference I will follow the Ancre monograph.
I want to show as much interieur as possible without neglecting too many details like masts, rigging and deck furniture. How this task turns out in detail will be determined throughout the construction as it progresses.
 

 

 

The keel assembly has been completed and cleaned up finally.
Removing laser char is a real pain, but much more to go for the frame construction.
 
Next chapter of the instructions are calling for the frame construction, I will skip this and rather continue with the building cradle assembly. This to have a safe storage for the keel and frames to come.
 
The inspector of construction ia already onsite and satisfied with the progress so far.
 



 
 

Well, construction starts...
 
I'am following the instructions which are asking for the keel assembly as the first step.
 
The required keel parts are located on two lasercut plates 9 and 10. It is very gratifying that both panels are of the same exact thickness, just under 4mm.
All parts are already pre tapered on both sides to form the rabbet. It is only a little more sanding and fine tuning on the tapering required.
After the usual activities of cleaning and removal of the laser char the accuracy of the joints is excellent.
To highlight the finished joints I have painted all edges both sides with a pencil 6B.
 

Seems that I'am one of the first who opens a buildlog of the CAF Le Coureur kit..
 
Unlike other buildlogs I will not start with a extensive kit review since this can be seen in other threads, like the one from CAF
My kit has been arrived after 6 days from the reception of the shipping notification to door delivery, very fast!
The kit was very well packed to ensure a safe transport.
 
Before the construction starts, here are a few thoughts as per today about my intentions on how to show the model.
I will try to display the Coureur as she appeared in 1776, just before the capture of the English navy.
For reference I will follow the Ancre monograph.
I want to show as much interieur as possible without neglecting too many details like masts, rigging and deck furniture. How this task turns out in detail will be determined throughout the construction as it progresses.
 

 

 

The keel assembly has been completed and cleaned up finally.
Removing laser char is a real pain, but much more to go for the frame construction.
 
Next chapter of the instructions are calling for the frame construction, I will skip this and rather continue with the building cradle assembly. This to have a safe storage for the keel and frames to come.
 
The inspector of construction ia already onsite and satisfied with the progress so far.
 



 
 

The keel assembly has been completed and cleaned up finally.
Removing laser char is a real pain, but much more to go for the frame construction.
 
Next chapter of the instructions are calling for the frame construction, I will skip this and rather continue with the building cradle assembly. This to have a safe storage for the keel and frames to come.
 
The inspector of construction ia already onsite and satisfied with the progress so far.
 



 
 

The keel assembly has been completed and cleaned up finally.
Removing laser char is a real pain, but much more to go for the frame construction.
 
Next chapter of the instructions are calling for the frame construction, I will skip this and rather continue with the building cradle assembly. This to have a safe storage for the keel and frames to come.
 
The inspector of construction ia already onsite and satisfied with the progress so far.
 



 
 

The keel assembly has been completed and cleaned up finally.
Removing laser char is a real pain, but much more to go for the frame construction.
 
Next chapter of the instructions are calling for the frame construction, I will skip this and rather continue with the building cradle assembly. This to have a safe storage for the keel and frames to come.
 
The inspector of construction ia already onsite and satisfied with the progress so far.
 



 
 

The keel assembly has been completed and cleaned up finally.
Removing laser char is a real pain, but much more to go for the frame construction.
 
Next chapter of the instructions are calling for the frame construction, I will skip this and rather continue with the building cradle assembly. This to have a safe storage for the keel and frames to come.
 
The inspector of construction ia already onsite and satisfied with the progress so far.
 



 
 

Well, construction starts...
 
I'am following the instructions which are asking for the keel assembly as the first step.
 
The required keel parts are located on two lasercut plates 9 and 10. It is very gratifying that both panels are of the same exact thickness, just under 4mm.
All parts are already pre tapered on both sides to form the rabbet. It is only a little more sanding and fine tuning on the tapering required.
After the usual activities of cleaning and removal of the laser char the accuracy of the joints is excellent.
To highlight the finished joints I have painted all edges both sides with a pencil 6B.
 

Seems that I'am one of the first who opens a buildlog of the CAF Le Coureur kit..
 
Unlike other buildlogs I will not start with a extensive kit review since this can be seen in other threads, like the one from CAF
My kit has been arrived after 6 days from the reception of the shipping notification to door delivery, very fast!
The kit was very well packed to ensure a safe transport.
 
Before the construction starts, here are a few thoughts as per today about my intentions on how to show the model.
I will try to display the Coureur as she appeared in 1776, just before the capture of the English navy.
For reference I will follow the Ancre monograph.
I want to show as much interieur as possible without neglecting too many details like masts, rigging and deck furniture. How this task turns out in detail will be determined throughout the construction as it progresses.
 

 

 

The keel assembly has been completed and cleaned up finally.
Removing laser char is a real pain, but much more to go for the frame construction.
 
Next chapter of the instructions are calling for the frame construction, I will skip this and rather continue with the building cradle assembly. This to have a safe storage for the keel and frames to come.
 
The inspector of construction ia already onsite and satisfied with the progress so far.
 



 
 

The keel assembly has been completed and cleaned up finally.
Removing laser char is a real pain, but much more to go for the frame construction.
 
Next chapter of the instructions are calling for the frame construction, I will skip this and rather continue with the building cradle assembly. This to have a safe storage for the keel and frames to come.
 
The inspector of construction ia already onsite and satisfied with the progress so far.
 



 
 

Well, construction starts...
 
I'am following the instructions which are asking for the keel assembly as the first step.
 
The required keel parts are located on two lasercut plates 9 and 10. It is very gratifying that both panels are of the same exact thickness, just under 4mm.
All parts are already pre tapered on both sides to form the rabbet. It is only a little more sanding and fine tuning on the tapering required.
After the usual activities of cleaning and removal of the laser char the accuracy of the joints is excellent.
To highlight the finished joints I have painted all edges both sides with a pencil 6B.
 

Seems that I'am one of the first who opens a buildlog of the CAF Le Coureur kit..
 
Unlike other buildlogs I will not start with a extensive kit review since this can be seen in other threads, like the one from CAF
My kit has been arrived after 6 days from the reception of the shipping notification to door delivery, very fast!
The kit was very well packed to ensure a safe transport.
 
Before the construction starts, here are a few thoughts as per today about my intentions on how to show the model.
I will try to display the Coureur as she appeared in 1776, just before the capture of the English navy.
For reference I will follow the Ancre monograph.
I want to show as much interieur as possible without neglecting too many details like masts, rigging and deck furniture. How this task turns out in detail will be determined throughout the construction as it progresses.
 

 

 

The keel assembly has been completed and cleaned up finally.
Removing laser char is a real pain, but much more to go for the frame construction.
 
Next chapter of the instructions are calling for the frame construction, I will skip this and rather continue with the building cradle assembly. This to have a safe storage for the keel and frames to come.
 
The inspector of construction ia already onsite and satisfied with the progress so far.
 



 
 

The keel assembly has been completed and cleaned up finally.
Removing laser char is a real pain, but much more to go for the frame construction.
 
Next chapter of the instructions are calling for the frame construction, I will skip this and rather continue with the building cradle assembly. This to have a safe storage for the keel and frames to come.
 
The inspector of construction ia already onsite and satisfied with the progress so far.
 



 
 

1:48 Le Coureur 1776
CAF Model
Catalogue # SSL07
Available directly from CAF Model for $342USD plus shipping
 

 
Le Coureur (1778) was a French lugger that Jacques and Daniel Denys built at Dunkirk and launched on 8 May 1776. HMS Alert, under the command of Lieutenant William George Fairfax, engaged and captured her on 17 June 1778, in advance of the declaration of war. In the engagement, Coureur, under the command of Enseigne de Rosily, had five men killed and seven wounded out of her crew of 50. Alert had four men wounded, two mortally. The British took Coureur into the Royal Navy under her existing name, as HMS Coureur. She was under the command of Lieutenant Christopher Major on 21 June 1780 when two American privateers, the Fortune and the Griffin, captured her outside Bonavista Bay after an action that cost her three men killed and four wounded. The Americans put Major and 30 of his men aboard Griffin, which fell prey the next day to HMS Fairy.
Wikipedia
 
The kit
Le Coureur is split into two kits, Parts 1 & 2. To make things a little easier to understand here, this article will look at the contents of each individual box. Each box is a shallow, corrugated affair with a lid flap and folding edge with tabs that lock everything closed. Each box is also very full of material, so much so that when removing items to review, I had the devil’s own work in trying to get it all back in there! Still, that’s certainly nothing to complain about. Instruction manuals are nicely printed and in clear plastic sleeves, and the plans and photo-etch are also nicely packaged. All parts are also sheathed in a sealed plastic covering to stop anything moving about in transit. In the main photo, please ignore the inclusion of the Salamandre cutter. This is separate and will be reviewed soon.
 
Pack 1

 


There are items within Pack 1 which pertain to Pack 2, such as side view plans with the interior, photo-etch etc. but for the sake of this article, we’ll look at them here as this is where they were found. Pack 1 is essentially a kit which produces the building cradle and the hull framing/keel etc. That’s it. So, you won’t find any embellishments, cannon or other fittings in here. 
 

 

 

 

 
What you do get are numerous ply frames that build the cradle, complete with a side plan engraved on one side, plus twelve panels of laser-cut cherry parts. This looks very easy to build and of course provides all positive locations for the keel, frames and stern timbers. CAF recommend the cradle base parts are screwed down onto a plat surface. I’ll use some high quality blockboard when my time comes, as this was excellent for the flying models I used to build, many moons ago.
 

 

 

 

 

 

 
The latter are produced with rounded edges, and I think this is because they needed to be able to flip the parts over to add the engraving to the opposite side, plus some CNC machining……yes, CNC on laser-cut sheets! I know it’s the first time I’ve ever encountered it. As far as the engravings go, these frame parts really do require it as they mark out the bevel for this clinker-planked hull. That’s why some sheets have the engraving on the reverse too. 
 

 

 

 

 

 

 

 
One thing you will see on the reverse is some heat scorching. This varies from sheet to sheet, but the one I show here is the worst of them. These parts will need to first be bevelled to the engraved lines before removing the char as we don’t want to lose the engravings by simply sanding the whole sheet first. There doesn’t appear to be any loss of surface material with this, so it should clean up just fine.Each panel of parts is clearly numbered, and the part numbers are referenced with a map of the panels that’s provided in the manual for Pack 1. So, you will have a part on panel 2, for example, shown as 02-8-a for part 8a. Very simple.
 

 
All frames are constructed on the series of drawings which are supplied on the rolled-up sheets. As these frames are built from parts on top of parts, the drawings also show where the overlaying frame elements sit, and you’ll need a metal setsquare to confirm things before you commit to glue. All parts will also need to be bevelled before any frame construction.
 
Some parts panels, as mentioned, also have some CNC machining. This is to create things like the rabbet on the keel, and the bevel for deadwood bearding line. The machining itself will need to be cleaned up to smooth it out, but the majority of the material is already removed for you, so just the cosmetics will be required. 
 

 

 

 
Taking of CNC machining, CAF also supply some stern parts which are fully machine-shaped. These just need cutting from the blocks they are a part of, and then cleaning up. As these are naturally verry complex shapes, it’s nice to see these prefabricated for the modeller.
 

 

 
Also in this pack, but for use with Pack 2 are two photo-etch frets, produced in brass. The larger one contains everything you would imagine you need, such as hinges, stove parts etc. An acetate sheet is included for glazing the stern windows.
 

 
 
 
 
Pack 2

 

 

 


This box is identical in size to that for Pack 1, and again, contains that much material that you’ll actually struggle to put it all back properly! All items, including fittings boxes, are wrapped in a single covering of clear film. Included here are three sheets of ply, four sheets of maple (deck), and over 35 sheets of cherry wood. Ply parts are included to modify the building jig as your model progresses, and also for a display stand, although I would be sorely tempted to use the parts as templates and build a display cradle from a more suitable material.
 

 

 
The decks are supplied as individual planks, laser cut into the maple sheets, and in the layout order in which you will install them. That’s a nice touch. I expect the laser char between them could be a good caulk representation, but I’d need to test that first.
 

 

 
When it comes to planking, CAF supply the materials to complete the whole hull interior and exterior. The exterior is clinker, and all planks are provided as laser-cut parts over a good many of the included sheets. The instructions clearly show how this much be approached. The tricky internal planks are a godsend, especially with the taper that’s required, so the inclusion of those is also very welcome.

 

 

 
CAF’s approach to other planked areas also follows that of the decks, where a specific area is laser cut in the order of application. It’s a no-brainer! Other parts, where applicable, are also engraved with bevel lines.
 

 

 

 

 

 

 

 
Not all parts are laser cut. Three parts panels are CNC cut. These also include machined notches, and they appear to be deck beams. 
 

 
 
 
There are TWO fittings boxes with Le Coureur, and they are brimming with parts.

 
The first I look at contains pins, rings, chains, lead sheeting, rigging blocks, leather, cord, clay stove parts, and a myriad of machined wooden items. First of all, the rigging blocks are machined from a dark timber and are supplied in chains that you need to cut up and clean the block ends. The machined wooden parts include the capstan and hawse, stern windows and stern embellishments. Some of the latter looks a little rough when photographed, but actually looks perfectly fine to the eye. Some very fine sanding sticks could be used to tickle anything you aren’t too happy with. To remove these fragile parts, you need to grind the backs of them over some medium abrasive paper, and they will be released.
 

 

 

 

 

 
The second parts box contains numerous metal fittings. I’m not sure if these are brass or bronze, but the casting is excellent. The cannon emblems are very nice, but I was unable to get a clear pic on the bare metal. Other metal parts include anchors, hooks, triangular eyelets, hinges etc.
 

 

 

 

 
Also in this box are various spools of rigging cord, and these also look very good quality. 
 

 
I was lucky enough to receive the Le Coureur nameplate, carved in pear wood, as part of their initial free gift promotion. This isn’t now included, but is available from CAF for $15. 
 

 
Brass wire is supplied on a wooden spool.
 

 
A bundle of strip wood and dowel is included and is of high quality. Lengths are identified for size. 
 

 
Sail cloth is also included, but you will need to make these yourself using the plans as reference.
 
 
 
Manuals


The manuals are very good, with English that is certainly easy enough to understand (having been proof-read and corrected by our very own Kerry Jang), and especially in context with the illustrations which have coloured elements to show what’s happening. The Pack 1’s 15-page manual focuses solely on the construction of the building cradle, preparation and assembly of the frames, and of course the basic building of the hull. Hull construction ends with the fitting of the keelson, and with the skeleton still within the building cradle.
 

 

 
The manual supplied with Pack 2 is a thicker publication, with 50 pages. Here we see the external planking, interior of the hull being fitted out with interior planking, interior bulkheads for the various compartments, floor, cabinets, sleeping berths, stove etc. The hull is indeed fully detailed within. This model is also fully masted and rigged and this is all shown in superb detail, rope by rope, rigging block by rigging block. As with the previous manual, you will need to cross identify each part with the parts map in the back of this manual. 
 
Numerous sheets of plans are supplied either rolled up or folded, and in full size. The largest, showing rigging and masting, is printed in A0 size, so you'll need a large place to hang this up! Drawings are superbly done, and to my eye, look easy to understand, but then again, I am used to studying technical and engineering drawings. 
 

 

 

 

 

 
 
 
Cutter

 


This type of cutter was very typical for the time, hence the reason for its inclusion with this kit. CAF have packed this into its own little box, and it presents a project in itself. As with the main hull, this is built up using a box jig into which seventeen individual frames sit on the keel, followed by the keelson. My only criticism of this is the use of ply for the frames. I feel these should’ve been made in cherry or preferable pear. All planks are laser cut into a thin veneer and need to be handled carefully. When built up, this should look a very attractive little addition to Le Coureur.

 

 

 

 
 
 
Accessories

 

 
This kit includes a small box containing barrels, crates, small crates, beds and also four crew. The barrel staves are produced in thin veneer, and photo-etch for the hoops. The crates are of simple construction and the parts look great with their laser engraving. Four resin crew figures are supplied too. 

 

 

 

 

 

 

 

 
 
Conclusion
This is the first time I’ve seen a CAF kit ‘in the timber’, so to speak, and I very much like this release. Production quality is high and I think it sells for a very reasonable price for the amount of work and time you will invest in the build. CAF have tried to make the dark art (for some of us!) of POF, as simple as they can with engraving lines for bevelled frame parts, machined chamfers and also pre-cut planks. Still, this will be no walk in the park if you’ve never attempted such a project before, but CAF has done as much as possible to hold your metaphorical hand throughout the build. 
 
There is some clean-up required on the rear of some panels, to remove scorching, but this won’t be too difficult, and the inclusion of those machined stern timbers is a very nice touch. Kit fittings such as stove and cannon are also nicely cast and made, and the wooden barrel and crate set add an extra degree of life to the already nicely furnished hull interior. Of course, there’s those resin crew and beds too. In all, this is a very attractive and comprehensive kit of a very worthy subject. One beauty of this POF kit is that the frames have a natural spacing which means you can still the interior if you decide to leave a number of planks off the model. Head over to CAF Model and place your order. Looking forward to seeing some build logs of this on MSW.
 
My sincere thanks to Tom at CAF Model for the kit reviewed here. To purchase, click the link at the top of the article.
 

 

 

 

 

 

 
 
 

 
 
 
 

Hello everybody.
I am kinda new here. I mean i have kept an eye on basically every ship build here.
And now i thought its time for me to post my build! 
This isn´t my first build (first was La Couronne - because of the price tag :D),
but this one i want to make as original as possible (for the real thing).
As I said my goal is to make this ship as it is right now..not what it was.
But will see through the process. Maybe some colors here and there- will see! 
 
And little bit of the backstory as well.
Like my name says i am from Estonia. I have liked those old ships from the very beginning.
Saw the first one..an boom liked it and it stay´d this way. And i remember when i was young 
i always wondered how the hell people build these... because my ships what i build these days
was basically just arrow shaped wood blanks with sails But now when we have internet and computers
i have searched here and there..i found these kits and everything. and then i stumbled 
upon this forum. and only thought what i had in my mind was: Dear diary- JACKPOT! 
i have learned so much from you guys. And now i want to put all this knowledge to work!
And bit what i have done so far (almost a year of building).
 
I really don´t like these plastic figurines..so i made them all out of wood
so they look authentic! And i painted the ship dark brown... well the color dark brown was on the canister 
lid but the ship came out pretty black but i don´t mind!
and there are some pictures of the progress so far! And now when the winter is coming and the nasty Covid-19 raising his 
head it time to start building again! 
Martin.

yipeeeeeee parts 2&3 are in the UK, been stuck in Holland for over 24 hours, Presently at Castle Donington

good evening everyome
 
Day 19 full frames and cants
 
i delayed putting the cants in for as long as possible, they seamed quite difficult, so best to leave them, but the time had to come
 
i may have mentioned it previously. that there are laser etched lines on a lot of the ribs, these provide a rough fairing line, 

so the same goes for the cants, also there is a angle template provided for each numbered cant to help achieve the correct angle, this template is to set up the bench sander at the correct angle, mine kept moving so i devised my own answer by gluing the template to the cant and then sanding to the correct line, it worked


having done that, i then found i did not have enough room to get access to pin the cants, 
so
i removed the top level of the jig
glued starboard cants 2 to 7 in position, when the glue set, i removed the hull from the frame to pin, this will be repeated on the stbd side

 
 




the hull drops back into the jig quite easy, im not sure how difficult its going to be to put the top level back on

 
 

Thanks James, excellent  that you are going to do a professional kit Review here.
 
Jeff, good to hear that you are just about to start your build.

Well, construction starts...
 
I'am following the instructions which are asking for the keel assembly as the first step.
 
The required keel parts are located on two lasercut plates 9 and 10. It is very gratifying that both panels are of the same exact thickness, just under 4mm.
All parts are already pre tapered on both sides to form the rabbet. It is only a little more sanding and fine tuning on the tapering required.
After the usual activities of cleaning and removal of the laser char the accuracy of the joints is excellent.
To highlight the finished joints I have painted all edges both sides with a pencil 6B.
 

Seems that I'am one of the first who opens a buildlog of the CAF Le Coureur kit..
 
Unlike other buildlogs I will not start with a extensive kit review since this can be seen in other threads, like the one from CAF
My kit has been arrived after 6 days from the reception of the shipping notification to door delivery, very fast!
The kit was very well packed to ensure a safe transport.
 
Before the construction starts, here are a few thoughts as per today about my intentions on how to show the model.
I will try to display the Coureur as she appeared in 1776, just before the capture of the English navy.
For reference I will follow the Ancre monograph.
I want to show as much interieur as possible without neglecting too many details like masts, rigging and deck furniture. How this task turns out in detail will be determined throughout the construction as it progresses.
 

 

 

We'll be publishing our review this week also.
 
Really looking forward to seeing what you do with this kit as I'll be starting as soon as my Duchess of Kingston is complete.