Beef Wellington

Greg - this is just amazing to see.  Will the 'photos' be published in a book, or be viewable on a PC?

Welcome aboard John,
 
thanks for your kind words....
have set up the main mast foot (the mast has a square section)...
 
Nils
 

 
 

update :
 
Floor planks and 10 deck supporting pillars mounted....
 
Nils
 

 
 

 
 

 
 

 
 

I could tell you Wayne...but then I'd have to kill you! Seriously, our renderings are being done by a very talented individual in Europe. I have no idea what software or computer he uses and wouldn't understand even if he told me. But I honestly can't tell whether the photo below is his rendering or my model.
 

 
 

Denis has been busy building our 3D Swan class ship. It's very exciting when it all comes together, for example the aft platform view below from the main deck (photo below). When paired with The Fully Framed Model series of books I don't believe there will be another more thoroughly researched and illustrated ship model reference available.
 
 

Really nice finish, you also managed to sneak in the tricky planking at the stern.  🙂

update...
 
made the stand plate (not stained yet), and the starboard inner wall under deck, together with the closed bulkheads fore and aft...
 
Nils
 

still had some brass left over candle holder parts....
 

the spindles are from M4 thread stainless steel. There will be no more access to the bilge, when the hull planking is on
 

basic wall is yellowish color, the doors are stained mahagony, window web is from card, door knobs brass, panels 0,8mm ply stained cherry color, frames mahagony...
 

the ship is set very stablile on the stand..
 

 
 

 

Hi, another pictures

Thanks for all the 'likes', and Greg, Pat, Mike, Christian, Bob, Tom, Hamilton, Michael, Mobbsie - I really appreciate your thoughts and interest, the good news is that I don't need to decide right now.  I got a little over-obsessive on Snake using the kit supplied materials which bogged things down a bit, I'm sure I'd enjoy rigging more with better quality line and be happier with the result.  What I'm hoping is that I can leave my options open even after things get closed up when the quarterdeck and f'csle go on (e.g. mast stumps that could easily be replaced with full masts and yards at some point)
 
BE - your Victory, despite just looking fantastic, presents yet another interesting alternative.  I too like that look a lot.
 
Coamings
Moving on a little, have started on the coamings and gratings.  I had ordered some of Chuck's gratings some time ago and these were relatively painless to make up.  The coaming dimensions were taken from AOTS with a few small adjustments to ensure the edge of the coaming met the wider binding strakes as illustrated.  I did go the whole hog and build these as per TFFM which was good practice, if not slow.  Not really much else to say.
 

 
Where the companionways are, I did do bit more fiddly work to try and simulate the beams and carlings that would be visible.  I'm sure there must be a better way, but the approach I took was as follows:
Build up the bottom of the companionway coaming by 1mm to account for the thickness of the deck (as coamings would sit on the beams/carlings, not the deck) 0.5mm sheet was applied to the side faces to simulate the recess on the interior face Boxwood sheets and strips attached to simulate the beams/carlings.  This was not hard once the approach had been figured out as this all still needs to slide in through the holes in the deck (which had to be enlarged a bit).  I did decide to paint these black, as is shown to good effect on the contemporary Winchelsea model.  I was tempted to leave these natural, but as I had made these out of pear, I felt that another wood tone would be distracting.  In any event, black appears to have been quite commonly used toward the end of the century to aid safety by making the companionways more visible against the deck. Bit of a Frankenstein's monster from underneath, but to my eye looks convincing enough when in place. 

 
All the coamings and gratings have been made up and just need some finishing.  I was pleased that the coamings lined up with the butt pattern of the planks, because as irregular as they looks, they do correspond with the theoretical placement of the beams below.
 
The third photo shows the difference in appearance with the added depth in the companionway, vs the coaming simply sitting on the deck for comparison.  The last photo shows everything in place.  One slight fudge I'm making here is to put a grating into the foremost of the two rearmost openings.  This should really be a companionway down to the wardroom, but the keel former realistically presents this being represented, and given that this will barely be glimpsed, a grating went on top instead.  The kit plans omit this feature entirely.
 

Thanks for all the 'likes', and Greg, Pat, Mike, Christian, Bob, Tom, Hamilton, Michael, Mobbsie - I really appreciate your thoughts and interest, the good news is that I don't need to decide right now.  I got a little over-obsessive on Snake using the kit supplied materials which bogged things down a bit, I'm sure I'd enjoy rigging more with better quality line and be happier with the result.  What I'm hoping is that I can leave my options open even after things get closed up when the quarterdeck and f'csle go on (e.g. mast stumps that could easily be replaced with full masts and yards at some point)
 
BE - your Victory, despite just looking fantastic, presents yet another interesting alternative.  I too like that look a lot.
 
Coamings
Moving on a little, have started on the coamings and gratings.  I had ordered some of Chuck's gratings some time ago and these were relatively painless to make up.  The coaming dimensions were taken from AOTS with a few small adjustments to ensure the edge of the coaming met the wider binding strakes as illustrated.  I did go the whole hog and build these as per TFFM which was good practice, if not slow.  Not really much else to say.
 

 
Where the companionways are, I did do bit more fiddly work to try and simulate the beams and carlings that would be visible.  I'm sure there must be a better way, but the approach I took was as follows:
Build up the bottom of the companionway coaming by 1mm to account for the thickness of the deck (as coamings would sit on the beams/carlings, not the deck) 0.5mm sheet was applied to the side faces to simulate the recess on the interior face Boxwood sheets and strips attached to simulate the beams/carlings.  This was not hard once the approach had been figured out as this all still needs to slide in through the holes in the deck (which had to be enlarged a bit).  I did decide to paint these black, as is shown to good effect on the contemporary Winchelsea model.  I was tempted to leave these natural, but as I had made these out of pear, I felt that another wood tone would be distracting.  In any event, black appears to have been quite commonly used toward the end of the century to aid safety by making the companionways more visible against the deck. Bit of a Frankenstein's monster from underneath, but to my eye looks convincing enough when in place. 

 
All the coamings and gratings have been made up and just need some finishing.  I was pleased that the coamings lined up with the butt pattern of the planks, because as irregular as they looks, they do correspond with the theoretical placement of the beams below.
 
The third photo shows the difference in appearance with the added depth in the companionway, vs the coaming simply sitting on the deck for comparison.  The last photo shows everything in place.  One slight fudge I'm making here is to put a grating into the foremost of the two rearmost openings.  This should really be a companionway down to the wardroom, but the keel former realistically presents this being represented, and given that this will barely be glimpsed, a grating went on top instead.  The kit plans omit this feature entirely.
 

Thanks for all the 'likes', and Greg, Pat, Mike, Christian, Bob, Tom, Hamilton, Michael, Mobbsie - I really appreciate your thoughts and interest, the good news is that I don't need to decide right now.  I got a little over-obsessive on Snake using the kit supplied materials which bogged things down a bit, I'm sure I'd enjoy rigging more with better quality line and be happier with the result.  What I'm hoping is that I can leave my options open even after things get closed up when the quarterdeck and f'csle go on (e.g. mast stumps that could easily be replaced with full masts and yards at some point)
 
BE - your Victory, despite just looking fantastic, presents yet another interesting alternative.  I too like that look a lot.
 
Coamings
Moving on a little, have started on the coamings and gratings.  I had ordered some of Chuck's gratings some time ago and these were relatively painless to make up.  The coaming dimensions were taken from AOTS with a few small adjustments to ensure the edge of the coaming met the wider binding strakes as illustrated.  I did go the whole hog and build these as per TFFM which was good practice, if not slow.  Not really much else to say.
 

 
Where the companionways are, I did do bit more fiddly work to try and simulate the beams and carlings that would be visible.  I'm sure there must be a better way, but the approach I took was as follows:
Build up the bottom of the companionway coaming by 1mm to account for the thickness of the deck (as coamings would sit on the beams/carlings, not the deck) 0.5mm sheet was applied to the side faces to simulate the recess on the interior face Boxwood sheets and strips attached to simulate the beams/carlings.  This was not hard once the approach had been figured out as this all still needs to slide in through the holes in the deck (which had to be enlarged a bit).  I did decide to paint these black, as is shown to good effect on the contemporary Winchelsea model.  I was tempted to leave these natural, but as I had made these out of pear, I felt that another wood tone would be distracting.  In any event, black appears to have been quite commonly used toward the end of the century to aid safety by making the companionways more visible against the deck. Bit of a Frankenstein's monster from underneath, but to my eye looks convincing enough when in place. 

 
All the coamings and gratings have been made up and just need some finishing.  I was pleased that the coamings lined up with the butt pattern of the planks, because as irregular as they looks, they do correspond with the theoretical placement of the beams below.
 
The third photo shows the difference in appearance with the added depth in the companionway, vs the coaming simply sitting on the deck for comparison.  The last photo shows everything in place.  One slight fudge I'm making here is to put a grating into the foremost of the two rearmost openings.  This should really be a companionway down to the wardroom, but the keel former realistically presents this being represented, and given that this will barely be glimpsed, a grating went on top instead.  The kit plans omit this feature entirely.
 

Really nice finish, you also managed to sneak in the tricky planking at the stern.  🙂

Really nice finish, you also managed to sneak in the tricky planking at the stern.  🙂

Thanks for all the 'likes', and Greg, Pat, Mike, Christian, Bob, Tom, Hamilton, Michael, Mobbsie - I really appreciate your thoughts and interest, the good news is that I don't need to decide right now.  I got a little over-obsessive on Snake using the kit supplied materials which bogged things down a bit, I'm sure I'd enjoy rigging more with better quality line and be happier with the result.  What I'm hoping is that I can leave my options open even after things get closed up when the quarterdeck and f'csle go on (e.g. mast stumps that could easily be replaced with full masts and yards at some point)
 
BE - your Victory, despite just looking fantastic, presents yet another interesting alternative.  I too like that look a lot.
 
Coamings
Moving on a little, have started on the coamings and gratings.  I had ordered some of Chuck's gratings some time ago and these were relatively painless to make up.  The coaming dimensions were taken from AOTS with a few small adjustments to ensure the edge of the coaming met the wider binding strakes as illustrated.  I did go the whole hog and build these as per TFFM which was good practice, if not slow.  Not really much else to say.
 

 
Where the companionways are, I did do bit more fiddly work to try and simulate the beams and carlings that would be visible.  I'm sure there must be a better way, but the approach I took was as follows:
Build up the bottom of the companionway coaming by 1mm to account for the thickness of the deck (as coamings would sit on the beams/carlings, not the deck) 0.5mm sheet was applied to the side faces to simulate the recess on the interior face Boxwood sheets and strips attached to simulate the beams/carlings.  This was not hard once the approach had been figured out as this all still needs to slide in through the holes in the deck (which had to be enlarged a bit).  I did decide to paint these black, as is shown to good effect on the contemporary Winchelsea model.  I was tempted to leave these natural, but as I had made these out of pear, I felt that another wood tone would be distracting.  In any event, black appears to have been quite commonly used toward the end of the century to aid safety by making the companionways more visible against the deck. Bit of a Frankenstein's monster from underneath, but to my eye looks convincing enough when in place. 

 
All the coamings and gratings have been made up and just need some finishing.  I was pleased that the coamings lined up with the butt pattern of the planks, because as irregular as they looks, they do correspond with the theoretical placement of the beams below.
 
The third photo shows the difference in appearance with the added depth in the companionway, vs the coaming simply sitting on the deck for comparison.  The last photo shows everything in place.  One slight fudge I'm making here is to put a grating into the foremost of the two rearmost openings.  This should really be a companionway down to the wardroom, but the keel former realistically presents this being represented, and given that this will barely be glimpsed, a grating went on top instead.  The kit plans omit this feature entirely.
 

Really nice finish, you also managed to sneak in the tricky planking at the stern.  🙂

Hi, the work continue on the openings of the second deck

Really nice finish, you also managed to sneak in the tricky planking at the stern.  🙂

Good morning
 

Thanks Piet 
 
Here are the promises pictures with the tung oil.
In the mean while I've bin busy with some other stuff.
I have place the upper stern part.
Easy to glue 
Next thing are the top bow batten and bottom bow batten.
I hope it will work because I have to bend again.
But we shall see.
 
Sjors
 
 

Thanks for all the 'likes', and Greg, Pat, Mike, Christian, Bob, Tom, Hamilton, Michael, Mobbsie - I really appreciate your thoughts and interest, the good news is that I don't need to decide right now.  I got a little over-obsessive on Snake using the kit supplied materials which bogged things down a bit, I'm sure I'd enjoy rigging more with better quality line and be happier with the result.  What I'm hoping is that I can leave my options open even after things get closed up when the quarterdeck and f'csle go on (e.g. mast stumps that could easily be replaced with full masts and yards at some point)
 
BE - your Victory, despite just looking fantastic, presents yet another interesting alternative.  I too like that look a lot.
 
Coamings
Moving on a little, have started on the coamings and gratings.  I had ordered some of Chuck's gratings some time ago and these were relatively painless to make up.  The coaming dimensions were taken from AOTS with a few small adjustments to ensure the edge of the coaming met the wider binding strakes as illustrated.  I did go the whole hog and build these as per TFFM which was good practice, if not slow.  Not really much else to say.
 

 
Where the companionways are, I did do bit more fiddly work to try and simulate the beams and carlings that would be visible.  I'm sure there must be a better way, but the approach I took was as follows:
Build up the bottom of the companionway coaming by 1mm to account for the thickness of the deck (as coamings would sit on the beams/carlings, not the deck) 0.5mm sheet was applied to the side faces to simulate the recess on the interior face Boxwood sheets and strips attached to simulate the beams/carlings.  This was not hard once the approach had been figured out as this all still needs to slide in through the holes in the deck (which had to be enlarged a bit).  I did decide to paint these black, as is shown to good effect on the contemporary Winchelsea model.  I was tempted to leave these natural, but as I had made these out of pear, I felt that another wood tone would be distracting.  In any event, black appears to have been quite commonly used toward the end of the century to aid safety by making the companionways more visible against the deck. Bit of a Frankenstein's monster from underneath, but to my eye looks convincing enough when in place. 

 
All the coamings and gratings have been made up and just need some finishing.  I was pleased that the coamings lined up with the butt pattern of the planks, because as irregular as they looks, they do correspond with the theoretical placement of the beams below.
 
The third photo shows the difference in appearance with the added depth in the companionway, vs the coaming simply sitting on the deck for comparison.  The last photo shows everything in place.  One slight fudge I'm making here is to put a grating into the foremost of the two rearmost openings.  This should really be a companionway down to the wardroom, but the keel former realistically presents this being represented, and given that this will barely be glimpsed, a grating went on top instead.  The kit plans omit this feature entirely.
 

Thanks for all the 'likes', and Greg, Pat, Mike, Christian, Bob, Tom, Hamilton, Michael, Mobbsie - I really appreciate your thoughts and interest, the good news is that I don't need to decide right now.  I got a little over-obsessive on Snake using the kit supplied materials which bogged things down a bit, I'm sure I'd enjoy rigging more with better quality line and be happier with the result.  What I'm hoping is that I can leave my options open even after things get closed up when the quarterdeck and f'csle go on (e.g. mast stumps that could easily be replaced with full masts and yards at some point)
 
BE - your Victory, despite just looking fantastic, presents yet another interesting alternative.  I too like that look a lot.
 
Coamings
Moving on a little, have started on the coamings and gratings.  I had ordered some of Chuck's gratings some time ago and these were relatively painless to make up.  The coaming dimensions were taken from AOTS with a few small adjustments to ensure the edge of the coaming met the wider binding strakes as illustrated.  I did go the whole hog and build these as per TFFM which was good practice, if not slow.  Not really much else to say.
 

 
Where the companionways are, I did do bit more fiddly work to try and simulate the beams and carlings that would be visible.  I'm sure there must be a better way, but the approach I took was as follows:
Build up the bottom of the companionway coaming by 1mm to account for the thickness of the deck (as coamings would sit on the beams/carlings, not the deck) 0.5mm sheet was applied to the side faces to simulate the recess on the interior face Boxwood sheets and strips attached to simulate the beams/carlings.  This was not hard once the approach had been figured out as this all still needs to slide in through the holes in the deck (which had to be enlarged a bit).  I did decide to paint these black, as is shown to good effect on the contemporary Winchelsea model.  I was tempted to leave these natural, but as I had made these out of pear, I felt that another wood tone would be distracting.  In any event, black appears to have been quite commonly used toward the end of the century to aid safety by making the companionways more visible against the deck. Bit of a Frankenstein's monster from underneath, but to my eye looks convincing enough when in place. 

 
All the coamings and gratings have been made up and just need some finishing.  I was pleased that the coamings lined up with the butt pattern of the planks, because as irregular as they looks, they do correspond with the theoretical placement of the beams below.
 
The third photo shows the difference in appearance with the added depth in the companionway, vs the coaming simply sitting on the deck for comparison.  The last photo shows everything in place.  One slight fudge I'm making here is to put a grating into the foremost of the two rearmost openings.  This should really be a companionway down to the wardroom, but the keel former realistically presents this being represented, and given that this will barely be glimpsed, a grating went on top instead.  The kit plans omit this feature entirely.
 

Thanks for all the 'likes', and Greg, Pat, Mike, Christian, Bob, Tom, Hamilton, Michael, Mobbsie - I really appreciate your thoughts and interest, the good news is that I don't need to decide right now.  I got a little over-obsessive on Snake using the kit supplied materials which bogged things down a bit, I'm sure I'd enjoy rigging more with better quality line and be happier with the result.  What I'm hoping is that I can leave my options open even after things get closed up when the quarterdeck and f'csle go on (e.g. mast stumps that could easily be replaced with full masts and yards at some point)
 
BE - your Victory, despite just looking fantastic, presents yet another interesting alternative.  I too like that look a lot.
 
Coamings
Moving on a little, have started on the coamings and gratings.  I had ordered some of Chuck's gratings some time ago and these were relatively painless to make up.  The coaming dimensions were taken from AOTS with a few small adjustments to ensure the edge of the coaming met the wider binding strakes as illustrated.  I did go the whole hog and build these as per TFFM which was good practice, if not slow.  Not really much else to say.
 

 
Where the companionways are, I did do bit more fiddly work to try and simulate the beams and carlings that would be visible.  I'm sure there must be a better way, but the approach I took was as follows:
Build up the bottom of the companionway coaming by 1mm to account for the thickness of the deck (as coamings would sit on the beams/carlings, not the deck) 0.5mm sheet was applied to the side faces to simulate the recess on the interior face Boxwood sheets and strips attached to simulate the beams/carlings.  This was not hard once the approach had been figured out as this all still needs to slide in through the holes in the deck (which had to be enlarged a bit).  I did decide to paint these black, as is shown to good effect on the contemporary Winchelsea model.  I was tempted to leave these natural, but as I had made these out of pear, I felt that another wood tone would be distracting.  In any event, black appears to have been quite commonly used toward the end of the century to aid safety by making the companionways more visible against the deck. Bit of a Frankenstein's monster from underneath, but to my eye looks convincing enough when in place. 

 
All the coamings and gratings have been made up and just need some finishing.  I was pleased that the coamings lined up with the butt pattern of the planks, because as irregular as they looks, they do correspond with the theoretical placement of the beams below.
 
The third photo shows the difference in appearance with the added depth in the companionway, vs the coaming simply sitting on the deck for comparison.  The last photo shows everything in place.  One slight fudge I'm making here is to put a grating into the foremost of the two rearmost openings.  This should really be a companionway down to the wardroom, but the keel former realistically presents this being represented, and given that this will barely be glimpsed, a grating went on top instead.  The kit plans omit this feature entirely.
 

Thanks for all the 'likes', and Greg, Pat, Mike, Christian, Bob, Tom, Hamilton, Michael, Mobbsie - I really appreciate your thoughts and interest, the good news is that I don't need to decide right now.  I got a little over-obsessive on Snake using the kit supplied materials which bogged things down a bit, I'm sure I'd enjoy rigging more with better quality line and be happier with the result.  What I'm hoping is that I can leave my options open even after things get closed up when the quarterdeck and f'csle go on (e.g. mast stumps that could easily be replaced with full masts and yards at some point)
 
BE - your Victory, despite just looking fantastic, presents yet another interesting alternative.  I too like that look a lot.
 
Coamings
Moving on a little, have started on the coamings and gratings.  I had ordered some of Chuck's gratings some time ago and these were relatively painless to make up.  The coaming dimensions were taken from AOTS with a few small adjustments to ensure the edge of the coaming met the wider binding strakes as illustrated.  I did go the whole hog and build these as per TFFM which was good practice, if not slow.  Not really much else to say.
 

 
Where the companionways are, I did do bit more fiddly work to try and simulate the beams and carlings that would be visible.  I'm sure there must be a better way, but the approach I took was as follows:
Build up the bottom of the companionway coaming by 1mm to account for the thickness of the deck (as coamings would sit on the beams/carlings, not the deck) 0.5mm sheet was applied to the side faces to simulate the recess on the interior face Boxwood sheets and strips attached to simulate the beams/carlings.  This was not hard once the approach had been figured out as this all still needs to slide in through the holes in the deck (which had to be enlarged a bit).  I did decide to paint these black, as is shown to good effect on the contemporary Winchelsea model.  I was tempted to leave these natural, but as I had made these out of pear, I felt that another wood tone would be distracting.  In any event, black appears to have been quite commonly used toward the end of the century to aid safety by making the companionways more visible against the deck. Bit of a Frankenstein's monster from underneath, but to my eye looks convincing enough when in place. 

 
All the coamings and gratings have been made up and just need some finishing.  I was pleased that the coamings lined up with the butt pattern of the planks, because as irregular as they looks, they do correspond with the theoretical placement of the beams below.
 
The third photo shows the difference in appearance with the added depth in the companionway, vs the coaming simply sitting on the deck for comparison.  The last photo shows everything in place.  One slight fudge I'm making here is to put a grating into the foremost of the two rearmost openings.  This should really be a companionway down to the wardroom, but the keel former realistically presents this being represented, and given that this will barely be glimpsed, a grating went on top instead.  The kit plans omit this feature entirely.
 

I would have to say yes - last time I was there I was dragging my kids around as well but they had a blast, between Victory, Warrior and the multiple museum exibits, harbor tours etc there is plenty to see and do just in the dockyard.  Add to that walks along the waterfront and the other historical sites (not forgetting maybe a few stops at 'The Still and West' pub) there's a lot to experience if the weather cooperates.  Of course depends on your pace, but everytime I have been I've never felt I had enough time to get around everything at a comfortable pace.

Hi Denis,
thanks for your word...
 
the lower deck was not really difficult...., first a template for each half, then cut out from ply and completely planked. Then slipped in, the (flexible) halves, through the deck beams fom above. Glue in place and then the gratings and the pillars.
Am now working on the below deck cabins wall, here also first doing a card template, the final wall will bear the doors and the wall panels. This will be visable through the open port side and though the port side main deck outcut of the ship later on...Will need to think about the color giving tones there...
 
Nils