AON

One had brought in a naval gun assembled from a kit and the other had 3D printed various size naval cannon barrels at his local library. I found this fascinating and now had an itch to build my own naval gun. Our local library posted a notice of a 90 minute compulsory course (on the evening of 20 November) to allow library card holders to use their 3D printer, so I signed up. A search on their website revealed they allow a 8Mb maximum size STL file of any non-copyrighted 3D image. The build area size is 230 mm long (9") x 150mm wide (5.9") x 130mm high (5.1"). They have a variety of colours and black is an option. I started my research on this forum, and concluded with a wider search on the internet and books in my personal library. I decided on a 9 Pound Naval Cannon that would be found on the quarterdeck or forecastle of HMS Bellerophon (1768), a 74 gun Man of War. Having gathered all the data I could, I made a full size model using Autodesk Inventor. I would rescale it to 1 inch = 12 inches (1:12) later. I settled on this scale because the dimensions of the 9 Pdr fits the 3D printer build area size at 1:12. I brought my info to the October meeting of the Model Shipwrights of Niagara and was told by the single member with experience that the 3D printer needs to start the build on a flat surface (so the object doesn't roll away). This gentleman had made several very small prints in one file (all at once) and oriented his cannons to stand on their flat muzzle. It was suggested by a well weathered modelling member I might split the cannon in half to create a flat surface to build up from and then glue them together afterwards. My model was altered and I added six cannon balls (with a flat underside) to add to my display. The STL file for these items is 7.68Mb in size. I may need to make changes after I attend the compulsory 3D printing course.

I will be getting back to my slow progressing scratch build of HMS Bellerophon with a goal to complete all the frames before next summer... but after a summer of home renovations, grass cutting, fishing, and a little carving, I found myself being drawn to something a couple members of our local club (Model Shipwrights of Niagara) brought to one of our monthly meetings earlier in the year (before the summer). This project was started on 24 October 2018.

Simple. I am the Admiral on my ship. However, please do not disturb Her Majesty with this info.

No progress on my build. The windowless playroom in the basement lost out to the call of the sun outside... but now summer is over, laying about is done, too cold and wet for fishing for these bones, and the grass seems to have stopped growing. Two bathroom renovations are done and the flooring of two other rooms is done and over. Time to get back at her. My goal this season is to get all the frames done and expect to start in the next couple weeks after yet one more diversion project is completed. I had got some progress on my first crack at carving the oversized X3 (too large for the model) figurehead. I had been working on it while sitting outside on the patio under the shade of the pergola and willow in late August. Took it to our September club meeting. Below are some pics. Still a considerable amount of work left to go on this... for later when I get bored. There is a small diversionary project on the go and I expect it will take another week or so before I finally get onto the Billy Ruffian once more.

Happy to see you are back. I completely understand the impact of summer distractions and the need for short term diversions. Wonderful pic of your dad. Looking forward to continuing to follow your progress. BZ Alan

Fantastic assortment of sizes

Kurt I do exactly the same thing. I put put mine in the bedroom clothes closet... top shelf. May be you should start looking on your top shelf. 😉 Alan

This might help with laying out your scarph joints. The Elements of Wood Ship Construction - Scarph Joints - W.H. Curtis (1919).pdf

It likely seems dumb but I would like to know how you have refined the process if you could explain😎

Beautiful job on the pair of block and tackle! ☺

Druxey these are the wee bits I watch for and have a special place they are saved in. Thanks for sharing! Alan

Nicely done!

So I had the boss look at it with me. She says it is blue lettering on a light blue background but noticed one upper part of the bend on the right is pure white background. I asked if the light blue could be the ribbon in the shadow of the transom. She didn't think so but then how do you explain the splash of white? She does not see the gold trim whereas I still do.

I am looking at the image posted above and I see blue letters on a white background with gold trim... but my left eye is not all it should be and my right eye compensates so possibly the white is a pale blue? In my opinion the pale blue seems an odd background if the lettering was meant to be clear from a distance, but I am no expert. I should ask my wife. 😉

Blue letters on white ribbon. Ribbon has gold trim. This combination looks very very good! The carver's wife must have picked them out.

It is quite a chunk of money! Too bad we didn't know about it back when they were offering photocopies. I suppose a reminder in outlook on your computer might work (if you still have the same computer by then).

Good morning Mark, I followed up on the above post of yours. It took quite a while to get all the information which condenses to the following: The document is 6 pages, 10" x 16", at 70 pounds sterling each plus VAT (tax) and shipping. They only offer photos at this time due to the age and condition of them. Photocopying might cause more damage .... however they are digitizing the documents and digital copies may be available in a year or so at reduced pricing.

had to look twice when I saw the moose!

hope to see more - espero ver mas

Greg, I ordered the book after reading your post copied above. It came in today. Not only do I have the quote in the original print now, it is accompanied by a photo of the figurehead of the Boyne with William III on horseback. A great reference. And then to add to this, I now know the original carver's name (pg. 21) of this original figurehead of HMS Bellerophon as described above. Thank you! Alan

Thank you for the suggestion Carl. I searched on the internet and found a few good examples but after having simply shorten them up I believe they do not look so bad... definitely not as majestic as they could have been but it would have been too ornamental and costly for a mere 74 gun ship of the line . Below are the last of these photos. I shortened the wings, changed the cape, and straightened out his back a bit as with all the handling it was beginning to go into a landing stance . The front and hind legs seem a bit thick but I cannot go much thinner on this clay model. I haven't the skill Later this week I will pick up some squares of Linden (local boxwood) for carving and when I feel the need for a change I will start hacking away to get some 3X enlarged practice sample pieces. Until then I need to get back to making frames.

Worked on it a bit more today and I have all the features on. I am not happy with the cape and I can hear one special someone whispering the wings are much to large and would break off with the first wave impact.... but I wanted to see what it would look like. So tomorrow I will work on the cape and cut the wings down to half size with no fold (simplified).2018-03-24 15.25.08.mp4

Had my eye injection yesterday. At 10 week intervals now from 4 weeks. Hope to progress to 12 weeks and eventually be healed but that could be 5 to 8 years I am told. So yesterday was an painful day. Today I can see without tearing up or having a massive head/eye ache but I must stay out of dusty environments for 3 days so no shop time for me. So I worked on my Marquette sculpture. Very first attempt. I must say this is fun. Looked through the house for an old wire cloths hanger but everything is plastic! So I used 12 gauge copper wire for the internal support. It seems to be holding up okay. I have to work on the mane, tail, wings, and Bellerophon's head and cloak. That will be tomorrow and Sunday if necessary.

Sorry, I was unclear. I did not understand the last sentence: "This also works quite well for bleeding - five minutes of direct pressure by the clock."

TMI? I did not understand it.