cobra1951 Posted January 21, 2016 Author #61 Posted January 21, 2016 Almost finished filling the Aft hold Crates, Spare Sails, Barrels, fitted and lashed to the deck Once the barrels were lashed down then a cargo net was fitted over them Once the ladder has been built and then dry fitted i will add some sacks in the remaining spare spaces AntonyUK, popeye the sailor, Harvey and 3 others 6 Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
thomaslambo Posted January 21, 2016 #62 Posted January 21, 2016 (edited) Really nice details...where did you pick up the netting...the same place that you gave us the link to? Are you going to wait until the planking is done before gluing all the stuff in? Edited January 21, 2016 by thomaslambo Altduck 1 Quote Boyd Current Build - HMS Bounty - Artesania Latina - Scale1:48
cobra1951 Posted January 21, 2016 Author #63 Posted January 21, 2016 (edited) Cheers Boyd All the cargo is already glued in place, i had to do it before the middle deck is put in place as i needed to have access from above to drill the holes and fit the eye bolts. It should all stay in place as i used Araldite to glue everything except the sails. The netting is for 1/16th scale tanks but if you stretch it a bit it works well on this kit. It was obtained from eBay.co.uk from a seller named great-sales247 but they have withdrawn the listing probably because it's out of stock. They have a page on the US eBay site but it's only listing the chains and rope as well. It might be worth contacting the seller to see if he's getting more http://www.ebay.com/itm/1-16-Scale-CHAINS-ROPE-for-Rc-Heng-Long-Tamiya-Tanks-Vehicles-Diorama-/181976659687?var=&hash=item2a5ea776e7:m:m3ZAsGanxwwqtEurUzG-lbw Edited January 21, 2016 by Cobr@ thomaslambo and Altduck 2 Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
thomaslambo Posted January 21, 2016 #64 Posted January 21, 2016 I had to do the same with my Captains Dining Cabin furniture. No way I could glue it in after the main deck went on. I actually used pins and epoxy to hold the furniture in...so far so good I have the cabin sealed shut with masking tape and used plastic wrap to cover the hammocks. I can't believe the amount of dust generated by all the sanding required on the frames and planking. Again, really nice details you put in the model as well as excellent placement Altduck 1 Quote Boyd Current Build - HMS Bounty - Artesania Latina - Scale1:48
cobra1951 Posted January 21, 2016 Author #65 Posted January 21, 2016 Ohhh yes lots of dust to come lol. Having stuff glued to the decks also makes it slow going when it comes to the hull planking as you have to be so careful I've also ordered some tables and benches to make a galley in the bow section of the middle deck rather than just have the stove there on it's own I will post a photo once i get them Altduck and thomaslambo 2 Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
cobra1951 Posted January 22, 2016 Author #66 Posted January 22, 2016 Assembled a ladder and then dry fitted half the middle deck and the ladder to see how much room available around it, then placed some of the potato sacks in the free spaces thomaslambo, popeye the sailor, canoe21 and 3 others 6 Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
Mirabell61 Posted January 22, 2016 #67 Posted January 22, 2016 very nice Bob, the food storage containments, sacks, casings, barrels, etc. are lovely, good job on the interior... ... little rats, mice,... on the sacks Nils thomaslambo 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
cobra1951 Posted January 22, 2016 Author #68 Posted January 22, 2016 (edited) Hi Nils, thank you I have searched the net for rats in the correct scale but up to now i have had no luck finding any. I might have go at making some myself though Edited January 22, 2016 by Cobr@ Phill Elston and Mirabell61 2 Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
Mirabell61 Posted January 22, 2016 #69 Posted January 22, 2016 Bob, I came accross these...., looks like this is a webshop.. http://www.fuhrmann-figuren-shop.de/KF-ANI-72001-Ratten 10 little rats cast in tin, in all positions. The man-figure does not belong to the group, for comparing size only. trust the price is nice and low, so there would be no risk... Nils bryanc 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
thomaslambo Posted January 22, 2016 #70 Posted January 22, 2016 Bob, I came accross these...., looks like this is a webshop.. http://www.fuhrmann-figuren-shop.de/KF-ANI-72001-Ratten 10 little rats cast in tin, in all positions. The man-figure does not belong to the group, for comparing size only. trust the price is nice and low, so there would be no risk... Nils Leave it to you Nils...great find (I was ready to make my own) Mirabell61 1 Quote Boyd Current Build - HMS Bounty - Artesania Latina - Scale1:48
cobra1951 Posted January 22, 2016 Author #71 Posted January 22, 2016 (edited) Bob, I came accross these...., looks like this is a webshop.. http://www.fuhrmann-figuren-shop.de/KF-ANI-72001-Ratten 10 little rats cast in tin, in all positions. The man-figure does not belong to the group, for comparing size only. trust the price is nice and low, so there would be no risk... Nils Hi Nils Thanks for taking the time to help me with my rats I had seen these and i am thinking about getting them. As you say they are cheap so no risk. The only downside is they are 1/72 scale and will probably look like mice not rats on a 1/48 kit. If i get them i will claim they are dwarf rats lol Edited January 22, 2016 by Cobr@ Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
Mirabell61 Posted January 22, 2016 #72 Posted January 22, 2016 Bob, here a second try.... not 1:48 but 1:35 as the description mentions... http://www.dersockelshop.de/ratten-resin-28-teile-1-35_plusmodel_pl171.html Nils cobra1951 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
cobra1951 Posted January 22, 2016 Author #73 Posted January 22, 2016 Bob, here a second try.... not 1:48 but 1:35 as the description mentions... http://www.dersockelshop.de/ratten-resin-28-teile-1-35_plusmodel_pl171.html Nils Thank you Nils These are great i will order some today, a little bit bigger but as i have loads of sacks on board i will say they are well fed rats Thanks again Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
Mirabell61 Posted January 22, 2016 #74 Posted January 22, 2016 Thank you Nils These are great i will order some today, a little bit bigger but as i have loads of sacks on board i will say they are well fed rats Thanks again Be quick Bob, it looks like this is the last set they have on stock in the moment....good luck Nils cobra1951 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
cobra1951 Posted January 22, 2016 Author #75 Posted January 22, 2016 Be quick Bob, it looks like this is the last set they have on stock in the moment....good luck Nils Yes i just ordered the last set in stock. 19 euros postage for a 7.95 euro item But hey you can't put i price on realism Once again I thank you for your help Nils Mirabell61 1 Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
Mirabell61 Posted January 22, 2016 #76 Posted January 22, 2016 congrats Bob, hope you will be be holding those little naggers soon. Already curious how your hold areas look like, when they come to life.... Nils thomaslambo and cobra1951 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
cobra1951 Posted January 22, 2016 Author #77 Posted January 22, 2016 Me too Nils Already have a plan to modify the metal sacks to display the rats better Mirabell61 and thomaslambo 2 Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
thomaslambo Posted January 22, 2016 #78 Posted January 22, 2016 Ok, if you have rats in the hold then you need to do something about it bryanc, cobra1951, Phill Elston and 3 others 6 Quote Boyd Current Build - HMS Bounty - Artesania Latina - Scale1:48
cobra1951 Posted January 22, 2016 Author #79 Posted January 22, 2016 Wow, some work went into that trap My way is easier just feed them to the crew, after all i am Captain Bligh haha Mirabell61, thomaslambo and Nirvana 3 Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
cobra1951 Posted January 22, 2016 Author #80 Posted January 22, 2016 (edited) Really nice details...where did you pick up the netting...the same place that you gave us the link to? Hi Boyd Are you still after some netting ? if you are there is a load of 1/35 camouflage netting on the US ebay site with free international postage Edited January 22, 2016 by Cobr@ Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
thomaslambo Posted January 23, 2016 #81 Posted January 23, 2016 (edited) Absolutely, I'll check it out....thanks much Edited January 23, 2016 by thomaslambo Quote Boyd Current Build - HMS Bounty - Artesania Latina - Scale1:48
cobra1951 Posted January 24, 2016 Author #82 Posted January 24, 2016 I have now made a start on the forward hold cargo GrantGoodale, foxy, canoe21 and 1 other 4 Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
Robert29 Posted January 24, 2016 #83 Posted January 24, 2016 Really awesome detail Bob. Robert cobra1951 1 Quote Current Build HMS Victory 1805 - Caldercraft - 1:72 Previous Build Bluenose II - Artesania Latina - 1:75 Completed Builds Juan Sebastian Elcano - 1:205 Bluenose II by bertu - Artesania Latina - 1:75
cobra1951 Posted January 24, 2016 Author #84 Posted January 24, 2016 Thank you Robert Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
cobra1951 Posted January 27, 2016 Author #85 Posted January 27, 2016 Cheers Lawrence The barrels are available here http://www.cornwallmodelboats.co.uk/acatalog/caldercraft_barrels.html As barrels come in a wide range of sizes in real life, scale is not critical so i just got ones that fitted in with the surroundings i was using them in canoe21 and foxy 2 Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
cobra1951 Posted January 29, 2016 Author #86 Posted January 29, 2016 (edited) While sorting out some more cargo for the forward hold i placed a few of the rats i bought around the holds and chewed up one of the metal sacks like it had been chewed by a rat. I will add more once i have finished with the cargo and also place some around the middle deck Edited January 29, 2016 by Cobr@ thomaslambo, Phill Elston, Mirabell61 and 8 others 11 Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
Nirvana Posted January 29, 2016 #87 Posted January 29, 2016 Cobr@, I think you need to put the rats on food-rations, they seem to be wellfed, considering their size and soon there won't be any food left for the crew. Unless as you stated, maybe feeding them to the crew. I like the setup with the cargo. Nice build. cobra1951 1 Quote Please, visit our Facebook page! Respectfully Per aka Dr. Per@Therapy for Shipaholics Finished: T37, BB Marie Jeanne - located on a shelf in Sweden, 18th Century Longboat, Winchelsea Capstan Current: America by Constructo, Solö Ruff, USS Syren by MS, Bluenose by MS Viking funeral: Harley almost a Harvey Nautical Research Guild Member - 'Taint a hobby if you gotta hurry
Mirabell61 Posted January 30, 2016 #88 Posted January 30, 2016 sweet detail with the little rats Bob it brings life into the holds.... Nils foxy and cobra1951 2 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
cobra1951 Posted January 30, 2016 Author #89 Posted January 30, 2016 Cobr@, I think you need to put the rats on food-rations, they seem to be wellfed, considering their size and soon there won't be any food left for the crew. Unless as you stated, maybe feeding them to the crew. I like the setup with the cargo. Nice build. Hi Nirvana thanks The rats are based on my big belly and the ones here in Liverpool lol Mirabell61 1 Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
cobra1951 Posted January 30, 2016 Author #90 Posted January 30, 2016 sweet detail with the little rats Bob it brings life into the holds.... Nils Thanks Nils Finding rats was a hard job until you found me some, thanks again for that They were the hardest part of the build so far. I mean you try getting them to stay still until the glue sets Mirabell61 1 Quote Bob Current Build HMB Endeavour - Occre 1:54 Completed Builds Section Deck Between Gun Bays - Panart 1:23 scale....x 2
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.