RNLB Ruby & Arthur Reed 2 by dj.bobo - FINISHED

[Omega1234]

I was gone for a month at home, working on a pusher on the Danube. I share the rest of their free time with family and my models.All the best .

Thanks. The thought of working on the Danube sounds fabulous and of course, like so much in life, our hobbies sometimes have to take a back seat whilst we go to work.

 

Nonetheless, it's great to see you back posting again.

 

All the best

 

Patrick

Edited February 22, 2016 by Omega1234

[dj.bobo]

Good evening everyone .

For today I present some work with metal , motor electric pedestal .

These pedestals we profiles made of iron, which we modified to order my .

All the best and a nice evening.

[kees de mol]

She;s moving allong very well.

[dj.bobo]

Good evening everyone.
Work continues with the final fixing of electrical motors in the ship's hold.
When catching the bases we used two component resin based adhesive http://www.bison.net/en/products/647-2-components-adhesives/product/2268-epoxy-universal/

All the best and I wish you a nice evening.

[ianmajor]

Looking very good. Those two motors will give a lot of power - I can see the boat will be high performance.

[dj.bobo]

Looking very good. Those two motors will give a lot of power - I can see the boat will be high performance.

Yes, indeed they have powers like the real ship that has 2030 horsepower and 31.5 tonnes  https://en.wikipedia.org/wiki/RNLB_Ruby_and_Arthur_Reed_II_%28ON_1097%29

All the best and a nice evening.

[dj.bobo]

Good evening everyone.
Slightly less work, and i have a propellers raboech five blades 35 mm diameter . I made plywood deck 1mm.
We built a place holder ship.
A beautiful evening still will want.

[Omega1234]

Very nice work and the finish on the hull is great!

 

Cheers

 

Patrick

[dj.bobo]

Good evening everyone, returning after some time I have been busy renovating an old proect and many other occupations. I resumed work on the superstructure and Ruby specifically to manufacture windows. I used these styrene 1 mm and 0.5 mm are not ready yet and will install tinted glass.
A beautiful evening still will want.

[Jim Lad]

Good to see that she's still progressing.

 

John

[Omega1234]

Good evening everyone, returning after some time I have been busy renovating an old proect and many other occupations. I resumed work on the superstructure and Ruby specifically to manufacture windows. I used these styrene 1 mm and 0.5 mm are not ready yet and will install tinted glass.A beautiful evening still will want.

Nice work.

 

Great to see you back! Keep the updates coming.

 

Cheers

 

Patrick .

[dj.bobo]

Hello everyone and thanks for the appreciation omega 1234 try to do as many but time is my enemy. Continue with work on the superstructure, tinted windows and door access ABS. Everything worked in styrene and sticking with cianocrilat.
That's it for today, still a nice evening.

[Omega1234]

Very nice!

[dj.bobo]

Good evening everyone, work continues to manufacture some parts, namely, the forward and rear windows for the command. We start manufacturing the aft superstructure.
That's it for today, still a nice evening.

[druxey]

Just catching up on your progress. Lovely work and detail!

[dj.bobo]

Hello everyone, today I present for work on the superstructure deck layout curve. And preparing for the definitive bridge.
I wish you a pleasant evening .

[kees de mol]

Very nice build.

[dj.bobo]

Hello everyone, today some work for the bridge superstructure and installation for matching arm rest several finishes.
A beautiful evening still will want.

[Omega1234]

Looking better and better with each new update!

[dj.bobo]

Hello everyone after some time to break back with a little work superstructure namely vents.
All the best .

[dj.bobo]

Good evening everyone.
After completing a handful of booths we applied primer to distinguish construction mistakes, I will use for plastic putty from Revell.
I will continue after a good finishing details.
A beautiful evening still will want.

[druxey]

Lovely detail work on the door/hatch there.

[Jim Lad]

Nice to see an update.  SAhe's coming along nicely.

 

John

[rwiederrich]

Wonderful build....I love RC boats...looks like it will get up and go.

 

Fun log.

 

Rob

[dj.bobo]

Good evening everyone, work continues with some rivets and holes from portholes aft superstructure. Here I tried some rivets and portholes bought and modified a bit.The size of the rivet head is 0.5 mm in diameter and 0.8 mm and a length of 3mm.
A beautiful evening and cool you want.

[Omega1234]

Hi DJ

 

Nice! It's the tiny details like the rivets and hatch handles etc, which are going to bring this ship to life.

 

Wonderful work.

 

Cheers

 

Patrick

Edited August 2, 2016 by Omega1234

[dj.bobo]

Good evening everyone, from now on I will only work details.
For today few ventilation holes with rivets handmade copper wire.
All the best and a nice evening.

[dj.bobo]

Good evening everyone.
I want to thank all you have clicked the Like button.
Today some work for the vents.

 

Cheers

 

Adrian .

[Jim Lad]

The detail work looks first class.

 

John

[dj.bobo]

Good evening ,everyone, work continues with some details, namely escape hatches.
All the best .

Adrian .