alde Posted February 24, 2016 #1 Posted February 24, 2016 Here we go with ship number 2. I am almost done with the Bounty Launch but wanted to set it aside for now to start something new. I had the Glad Tidings and the Armed Virginia Sloop on the shelf and decided to go with this one. I love the lines of this little schooner. I got it started with no trouble so far. Cutting the rabbit went pretty well. All the bulkheads are in place and the supports are going in. I should have the 2 halves together very soon and will start to plan the planking. I hope to learn as much from this build as I did the Bounty Launch. I will do my best to keep the log updated and take as many pictures as possible. Sometimes I get carried away and forget. I'm sure I will have plenty of questions. I sure wish I had the skill and nerve to jump into a bigger project but I want to take it slow and build my skills. I also need to learn to slow down and take my time. Thanks for stopping by. Please don't hesitate to point out anything that looks out of place or to ask questions about the kit or what I am doing. Al ccoyle, UpstateNY, hexnut and 2 others 5 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
Elijah Posted February 24, 2016 #2 Posted February 24, 2016 Looks nice! I will come aboard, if I may! alde 1 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
Guest Tim I. Posted February 24, 2016 #3 Posted February 24, 2016 Al, It is a great build. One a really enjoyed. Pulling up a seat to follow your build! - Tim Quote
alde Posted February 24, 2016 Author #4 Posted February 24, 2016 Tim, I have read through your Pinky log. It's going to be a great help in my build. Elijah 1 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
gerty Posted February 27, 2016 #5 Posted February 27, 2016 Look forward to following along - alde and Elijah 2 Quote Current Build: Willie L. Bennett - Model Shipways Future Interests: Friendship Sloop - BlueJacket Ship Crafters Cape Cod Catboat - BlueJacket Ship Crafters
alde Posted February 27, 2016 Author #6 Posted February 27, 2016 I'm making a wee little bit of progress but nothing worth pictures right now. I am getting the bulkhead supports in and will get them nice a faired next. I will get a couple of progress pictures before the halves go together and another after. I am looking forward to getting the planking started. Elijah 1 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
alde Posted March 1, 2016 Author #7 Posted March 1, 2016 I got the hull halves together. The fit was pretty good and it went well. I have started fairing and that is going slow but pretty good so far. I really like the lines of this little ship. After the fairing the supports for the cabin and cockpit. Some of my bulkhead supports might be in the way but they should be easy to shim. I am a real wood butcher compaired to some of you guys but it's getting better. Elijah, gerty, coxswain and 3 others 6 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
Guest Tim I. Posted March 1, 2016 #8 Posted March 1, 2016 It really is a fun ship to build. Your halves look like they went together well. - Tim Quote
Jim Lad Posted March 1, 2016 #9 Posted March 1, 2016 Looks like you've made a good start. John Elijah and alde 2 Quote
UpstateNY Posted March 1, 2016 #10 Posted March 1, 2016 Hi Alde, I'd like to follow along as well if you don't mind. Nice job on pairing up the two halves of the hull...looks really good. Cheers, Nigel. alde and Elijah 2 Quote Current Build Logs: H.M.S. Triton Cross Section, USF Confederacy Model Shipways Completed Log: Red Dragon Artesania Latina Gallery: Red Dragon: Artesania Latina Member: Nautical Research Guild
alde Posted March 1, 2016 Author #11 Posted March 1, 2016 Thank you all for the likes and joining in. Please don't hesitate to point out errors or just point and laugh. Elijah 1 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
alde Posted March 1, 2016 Author #12 Posted March 1, 2016 I can see that fairing the bulkheads is one of those things that's easy to do but difficult to do well. Slow and easy is the way to go for sure. Elijah 1 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
Elijah Posted March 1, 2016 #13 Posted March 1, 2016 The halves look good together Al! Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
timo4352 Posted March 2, 2016 #14 Posted March 2, 2016 Looking like a good start Alde. Maybe you can inspire me to start mine up again soon. alde, Elijah and Dee_Dee 3 Quote Tim "That's a fine looking pair of oars you got there, Sir"" 'em aint 'ores --- that's me wife and me daughter! " Current build: Glad Tidings Pinky Schooner Past builds: 1:1 Stick-Up Sharpie Build Muscongus Bay Lobster Smack by Timo4352 - Midwest Products - SMALL - First time builder Gunning Dory sail & oar boat 1:1 Future Build: Scratch built Mower Dory - scale undetermined yet another future build: Martha - Chesapeake draketail
alde Posted March 3, 2016 Author #15 Posted March 3, 2016 The fairing is going pretty well. The bulkheads are pretty thick which is really nice. It makes it much easier to see the hull shape up. I don't want to take much more off so I am checking it often with a piece of planking. Please excuse the messy bench. Maybe I will get it straightened out before I go much further. hexnut, UpstateNY, Elijah and 3 others 6 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
alde Posted March 5, 2016 Author #16 Posted March 5, 2016 Well, I got all my deck beams in and that was easy enough but now it's time to plank the hull. I have read and re-read the instructions, read the Jim Roberts planking book and some on line information as well as some build logs. I'm still not sure I have a firm understanding of it. I have sectioned off the 3 belts per the instructions and ran my battens. It looks to have a good flow and seems to match the plans pretty well. The plans have plank patterns and I may see how those fit but I want try spiling my own planks too. I have a proportional divider so I thought I could use it and tick strips. Am I going in the right direction? It seems that some of you guys pick this stuff right up and do a great job. I seem to be really planking challenged. Of course if I just did it and quite worrying about it I would be better off. Elijah, steamschooner, UpstateNY and 5 others 8 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
UpstateNY Posted March 5, 2016 #17 Posted March 5, 2016 Hi Alde, I am no planking expert, but your runs look pretty good to me. I'd just make sure the battens are symmetrical on each side and then see how things look once you done your tick strips! Cheers, Nigel. Elijah, markjay and alde 3 Quote Current Build Logs: H.M.S. Triton Cross Section, USF Confederacy Model Shipways Completed Log: Red Dragon Artesania Latina Gallery: Red Dragon: Artesania Latina Member: Nautical Research Guild
alde Posted March 5, 2016 Author #18 Posted March 5, 2016 Nigel, Thanks for putting a second set of eyes on it. it looks like if i use the plank patterns on the plans they will note close to fitting at least at the bow. they are way too wide. I am using my tick strip at each bulkhead and dividing it by the number of planks in the belt. I know this may seem elementary to some of you seasoned plankers but it's still voodoo science to me. It will be slow going but it looks like it will lay out according to the plans. Elijah 1 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
Guest Tim I. Posted March 6, 2016 #19 Posted March 6, 2016 I should chime in as I used the plank patterns. They are larger than the planks, but that is good as you will want to shape and sand them into place, but they are not far off the mark. If you decide to plank as you have mentioned above, if it was me I would spile the planks. You will be quite pleased with the result. I hope this helps. - Tim Quote
alde Posted March 6, 2016 Author #20 Posted March 6, 2016 (edited) Tim, Maybe it's my fairing but at the plan width they would be way too wide. This will at least be a good lesson on laying out the planks. I will still use the patterns as a guide. Edited March 6, 2016 by alde Elijah 1 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
alde Posted March 10, 2016 Author #21 Posted March 10, 2016 Talk about slow going. I have taken almost 2 days to install 2 rows of planks on both sides. I'm sure glad this one will be painted. I am using the patterns provided on the plans and if they are made to the line or just inside they size out right. I have been checking the width of each plank with a tick strip and my proportional dividers. It looks like a hack job compaired to some of you guys. MEPering, Seventynet, UpstateNY and 1 other 4 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
timo4352 Posted March 13, 2016 #22 Posted March 13, 2016 I marked out all the plank lines on all the moulds like this: The patterns come pretty close but I had to kind of average the widths out a bit to see what fits and looks right. So not all fall right on their lines. No one will ever know as long as one plank is not too wide, and the one next to it too narrow. Duanelaker, cristikc, alde and 6 others 9 Quote Tim "That's a fine looking pair of oars you got there, Sir"" 'em aint 'ores --- that's me wife and me daughter! " Current build: Glad Tidings Pinky Schooner Past builds: 1:1 Stick-Up Sharpie Build Muscongus Bay Lobster Smack by Timo4352 - Midwest Products - SMALL - First time builder Gunning Dory sail & oar boat 1:1 Future Build: Scratch built Mower Dory - scale undetermined yet another future build: Martha - Chesapeake draketail
alde Posted March 14, 2016 Author #23 Posted March 14, 2016 Tim, I am doing something similar but one row at a time. I have been dividing the belt into number of planks remaining at each station as I go. It's probably easier to do it your way. I also notice your battens don't sweep up as much as mine at the bow. I think the planks that I have set so far are pretty good but I may need to adjust that battens. Your plank run looks really nice. Mine will need much sanding. Elijah 1 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
Seventynet Posted March 31, 2016 #24 Posted March 31, 2016 Hi Alde, it looks like you are doing a fine job. I enjoyed reading through your log. Keep up the good work. Best, Ian alde and Elijah 2 Quote Builds in progress - Speedwell - by Syren Ship Model Company Builds completed - Hayling Hoy - by David Antscherl - Naval Cutter Cheerful - by Syren Ship Model Company - Cape Cod Catboat - by Bluejacket - Gokstad - by Dusek - Ship's Boat - by Dusek - Brazzera - by MarisStella
alde Posted April 8, 2016 Author #25 Posted April 8, 2016 The planking slowly continues.I finished up with the upper belt and have started working my way up from the keel. I am pretty happy with the way it's going so far and it's definitely getting better and easier as it goes. I wish I got more time to work on it but really have a great time when I do. Thanks for stopping in for a look. I hope to have more progress fairly soon Seventynet, coxswain, MEPering and 3 others 6 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
alde Posted May 7, 2016 Author #26 Posted May 7, 2016 It's been a while since I posted to my build log. Progress has been a little slower than I would like but it's been moving along. The hull is almost planked and I am pretty happy with it for the most part. I have been using the plank patterns provided in the plans and they are shaped pretty well but I ran into a bit of a problem. I did the upper belt first and then started working from the keel up and when got to the middle I started to run out of room to get the correct number of planks in. I will be 3 planks short on both sides and some of the planks will be too narrow. I am basically faking them in. It will look alright but I'm glad the hull will be painted. It still has a nice shape to it. What I should have correctly laid out the number of planks on each bulkhead and trimmed each on to fit the tick marks on the bulkheads correctly. It's a good lesson for next time and should be pretty easy to correct on the next build. Here are a couple of pictures as she sits now. hamilton, hexnut, russ and 3 others 6 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
hamilton Posted May 7, 2016 #27 Posted May 7, 2016 Great work on a really fun kit - I built this one a couple of years ago and it still ranks as one of my favourite builds so far. Hope you're having fun with it hamilton alde and Elijah 2 Quote current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch) previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); MS Glad Tidings (1937) (in need of a refit); HMS Blandford (1719) from Corel HMS Greyhound; Fair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851); Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch) under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy
alde Posted May 8, 2016 Author #28 Posted May 8, 2016 Thanks Hamilton, it's great having another Glad Tidings builder stop in. There don't seem to be many builds of this ship and I don't know why. I think it's a great looking model and the kit is very nice. Maybe warships are just more popular. I can understand that with the detail and history of some of them. I like them too but thought this would be a great kit to learn from and it is. hamilton and Elijah 2 Quote The heart is happiest when the head and the hands work together. Al Current Builds: HMS Halifax 1/48 POF Lumberyard Kit Model Shipways Glad Tidings Acoustic Guitar Build FINISHED
hamilton Posted May 8, 2016 #29 Posted May 8, 2016 I agree - I wish there were more large scale models of working boats like the Glad Tidings.....I have the p.o.f. Emma C. Berry from Model Shipways, and I've built Corel's Flattie and Brittany Sloop - both were a lot of fun, and in a large enough scale (1:25) to add quite a bit of detail. hamilton Elijah and alde 2 Quote current builds: Corel HMS Bellona (1780); Admiralty models Echo cross-section (semi-scratch) previous builds: MS Phantom (scuttled, 2017); MS Sultana (1767); Corel Brittany Sloop (scuttled, 2022); MS Kate Cory; MS Armed Virginia Sloop (in need of a refit); Corel Flattie; Mamoli Gretel; Amati Bluenose (1921) (scuttled, 2023); AL San Francisco (destroyed by land krakens [i.e., cats]); Corel Toulonnaise (1823); MS Glad Tidings (1937) (in need of a refit); HMS Blandford (1719) from Corel HMS Greyhound; Fair Rosamund (1832) from OcCre Dos Amigos (missing in action); Amati Hannah (ship in a bottle); Mamoli America (1851); Bluenose fishing schooner (1921) (scratch); Off-Centre Sailing Skiff (scratch) under the bench: MS Emma C Barry; MS USS Constitution; MS Flying Fish; Corel Berlin; a wood supplier Colonial Schooner Hannah; Victory Models H.M.S. Fly; CAF Models HMS Granado; MS USS Confederacy
Elijah Posted May 9, 2016 #30 Posted May 9, 2016 Nice planking! You're almost there! alde and Mirabell61 2 Quote -Elijah Current build(s): Continental Gunboat Philadelphia by Model Shipways https://modelshipworld.com/index.php?/topic/15753-continental-gunboat-philadelphia-by-elijah-model-shipways-124-scale/ Completed build(s): Model Shipways Phantom http://modelshipworld.com/index.php?showtopic=12376 Member of: The Nautical Research Guild N.R.M.S.S. (Nautical Research and Model Ship Society)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.