Reci Posted October 7, 2018 #1 Posted October 7, 2018 Hi everyone I want to share the stages of my ongoing project... References Building the keel system... oscarmate, fnick and cog 3 Quote
Reci Posted October 8, 2018 Author #2 Posted October 8, 2018 Decking of the main deck... ccoyle, Duanelaker and tasmanian 3 Quote
Reci Posted October 8, 2018 Author #3 Posted October 8, 2018 Deck sanding... kier, tasmanian, cog and 1 other 4 Quote
hof00 Posted October 8, 2018 #4 Posted October 8, 2018 (edited) Nice work!! I finished this model a year or so ago.... (On this site.) An interesting subject with an equally interesting history. (Just make sure you measure the dowels for Masts, etc carefully, there is not much room for error in the material supplied.) Let me know if I can be of assistance at any stage. Enjoy!! Cheers....HOF. Edited October 8, 2018 by hof00 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
bridgman Posted October 9, 2018 #5 Posted October 9, 2018 Lovely book of sketches of original Pen Duick, of the same, name published by Gallimard in October 2001. Authors may be Du Croquis A' Aquarelle and Marc P.G. Berthier. My uncertany about the authors is that the entire book is in French. Sketches are in color and black and white and show details of both interior and deck arrangements. Used book when I Built my model of Pen Duick as a source of information. Quote
Viggen Posted October 9, 2018 #6 Posted October 9, 2018 Very nice work with the deck! Looking forward to see the next steps! Quote
Reci Posted October 9, 2018 Author #7 Posted October 9, 2018 (edited) 18 hours ago, hof00 said: Nice work!! I finished this model a year or so ago.... (On this site.) An interesting subject with an equally interesting history. (Just make sure you measure the dowels for Masts, etc carefully, there is not much room for error in the material supplied.) Let me know if I can be of assistance at any stage. Enjoy!! Cheers....HOF. Thank you HOF. I reviewed your model on the forum. Nice job Edited October 9, 2018 by Reci Quote
Reci Posted October 9, 2018 Author #8 Posted October 9, 2018 11 hours ago, Viggen said: Very nice work with the deck! Looking forward to see the next steps! Thank you Viggen Quote
Reci Posted October 9, 2018 Author #10 Posted October 9, 2018 (edited) Sanding.. There are not enough pictures in the build guide. I share detailed pictures . Please tell me if there is a problem i reduce picture sharing Edited October 9, 2018 by Reci tasmanian, hof00, cog and 4 others 7 Quote
hof00 Posted October 9, 2018 #11 Posted October 9, 2018 Nice! Brings back memories. 🙂 Cheers....HOF. cog 1 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
hof00 Posted October 15, 2018 #12 Posted October 15, 2018 Hi Chap, How's progress? (I can talk.... It's been a few months since I did anything/something positive!! 🙂 ) Cheers....HOF. Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson
Reci Posted October 20, 2018 Author #13 Posted October 20, 2018 I double planked the hull with beech veneer. I cut off the stern in order to obtain a neat finish at the ends of the 2nd planks and reshaped it using a block made of mahogany veneer layers . coxswain 1 Quote
Reci Posted October 20, 2018 Author #15 Posted October 20, 2018 Sand down all the veneered surfaces... yvesvidal, hof00, coxswain and 2 others 5 Quote
Reci Posted November 29, 2018 Author #16 Posted November 29, 2018 Apply sanding sealer on main deck and coxswain, Duanelaker and kier 3 Quote
Katsumoto Posted November 29, 2018 #17 Posted November 29, 2018 Nice work. The beach veneer is also a nice add-on. She will be a lovely ship! Quote Regards, Peter Current project - Wappen von Hamburg 1669 heavily bashed Previous project - Xebec Cazador 1750 bashed Previous project - Santa Maria bashed
Reci Posted November 29, 2018 Author #18 Posted November 29, 2018 Apply sanding sealer all over the hull and sand yvesvidal, tasmanian, kier and 1 other 4 Quote
Reci Posted November 29, 2018 Author #19 Posted November 29, 2018 Painting of the hull... coxswain, yvesvidal, kier and 1 other 4 Quote
Reci Posted November 29, 2018 Author #20 Posted November 29, 2018 Apply satin cote on the entire hull coxswain, hof00, yvesvidal and 4 others 7 Quote
coxswain Posted November 29, 2018 #21 Posted November 29, 2018 Wow!! Clean, Sharp, Smooth and quite a few others are words one can use to describe this work!! Steve M........... tasmanian 1 Quote
Reci Posted November 29, 2018 Author #22 Posted November 29, 2018 1 hour ago, coxswain said: Wow!! Clean, Sharp, Smooth and quite a few others are words one can use to describe this work!! Steve M........... Thanks Steve ... Quote
Mirabell61 Posted November 29, 2018 #23 Posted November 29, 2018 Hi Reci, super planking job for hull and deck, she looks great... Nils tasmanian 1 Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50
Reci Posted November 29, 2018 Author #24 Posted November 29, 2018 1 hour ago, Mirabell61 said: Hi Reci, super planking job for hull and deck, she looks great... Nils Thanks Nils Mirabell61 1 Quote
Reci Posted November 29, 2018 Author #25 Posted November 29, 2018 4 hours ago, Katsumoto said: Nice work. The beach veneer is also a nice add-on. She will be a lovely ship! Thanks Quote
yvesvidal Posted November 29, 2018 #26 Posted November 29, 2018 I love that green color. Looks so realistic. What color is this? Out of a can or spray gun? Yves Quote
Reci Posted November 29, 2018 Author #27 Posted November 29, 2018 (edited) On 11/29/2018 at 8:46 PM, yvesvidal said: I love that green color. Looks so realistic. What color is this? Out of a can or spray gun? Yves Tamiya XF-5 Flat green applied with AB Edited December 7, 2018 by Reci Quote
Redshirt Posted November 29, 2018 #28 Posted November 29, 2018 Since i find this ship to be rather beautiful i am thinking about buying the kit as a christmas present for me. Yet Artesania Latina isn't exactly blessed with the most stelar reputation and so i would like to know if the kit's quality is good or if there are major problems with it. Thanks, Daniel yvesvidal 1 Quote
Reci Posted November 30, 2018 Author #29 Posted November 30, 2018 (edited) * construction guide insufficient * 1 and 2 frames starboard incorrect * planking strips broad Edited December 5, 2018 by Reci Quote
Reci Posted December 3, 2018 Author #30 Posted December 3, 2018 ... Mirabell61, Duanelaker, coxswain and 5 others 8 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.