ianmajor Posted September 21, 2013 #31 Posted September 21, 2013 Jan, The gratings look great. Nice work. I am trying to work out how you made the the capstans. Quote Ian M. Current build: HMS Unicorn (1748) - Corel Kit Advice from my Grandfather to me. The only people who don't make mistakes are those who stand back and watch. The trick is not to repeat the error.
firdajan Posted September 30, 2013 Author #33 Posted September 30, 2013 Thanks my friends for your replies I´m still slowly progressing. Some small parts are added ( pin rails, doors etc ), glued capstans, channels and knees. The deck equipment should be finished. Now I can to start with armament and gunport lids. Jan Dan Vadas, AndyHall, NAZGÛL and 1 other 4 Quote Finished: Ark Royal 1588 Mary Rose 1545 Arabian Dhow Revenge 1577 ( first attempt ) La Couronne 1636 Trinidad 1519 Revenge 1577 ( the second one ) Nina 1492 Pinta 1492 Santa Maria 1492 San Salvador 1543 Anna Maria 1694 Sao Gabriel 1497 On the table: Sovereign of the Seas 1636 - continuing after 12 years All of them are paper models
Ray Posted September 30, 2013 #34 Posted September 30, 2013 Great build hard to belive its not a normal wooded kit most impressive Quote Ray Current build A set of HMS Diana`s boats @ 1/48 HMS Royal Marine a Military class Trawler Completed HMS Diana Completed build The Lady Nelson Completed Build HMS Pegasus
firdajan Posted October 14, 2013 Author #35 Posted October 14, 2013 Thanks Ray I had some problems with my computer, but I´ve been still continuing - all of cannons are made, and almost all of them are placed except of upper decks. I didn´t use parts from the kit, because I wanted to produce solid cannons from paper - so I produced them by rolling from the soft paper - aroud the piece of wire of suitable diameter ( my wife is using this type for baking ) I used this way on all of my ships. I also have prepared gunport lids ( today I´ll glue them on te ship ). Some of another small parts are placed too. The hull is almost completed ( except the balcony roofing - I´m still deciding, if to do it, or not ). At the end of the week I will start with masts. Jan DSiemens, ianmajor, SawdustDave and 5 others 8 Quote Finished: Ark Royal 1588 Mary Rose 1545 Arabian Dhow Revenge 1577 ( first attempt ) La Couronne 1636 Trinidad 1519 Revenge 1577 ( the second one ) Nina 1492 Pinta 1492 Santa Maria 1492 San Salvador 1543 Anna Maria 1694 Sao Gabriel 1497 On the table: Sovereign of the Seas 1636 - continuing after 12 years All of them are paper models
ianmajor Posted October 14, 2013 #36 Posted October 14, 2013 Jan, Those cannon barrels are impressive. At first glance they look as though they have been turned from brass. It takes a lot of skill to make barrels that regular out of rolled paper. Quote Ian M. Current build: HMS Unicorn (1748) - Corel Kit Advice from my Grandfather to me. The only people who don't make mistakes are those who stand back and watch. The trick is not to repeat the error.
firdajan Posted October 16, 2013 Author #37 Posted October 16, 2013 Thanks Ian, several years ago, when I started wid shipbuilding again, I searched for solution, how to buid a solid cannons from paper ( I didn´t start with kit, but I started as a scratchbuilder ). I think I found it, it works perfectly Here are some photos of the ship with gunport lids Momentary I´m a " masts producer " Jan NAZGÛL, Dan Vadas, druxey and 3 others 6 Quote Finished: Ark Royal 1588 Mary Rose 1545 Arabian Dhow Revenge 1577 ( first attempt ) La Couronne 1636 Trinidad 1519 Revenge 1577 ( the second one ) Nina 1492 Pinta 1492 Santa Maria 1492 San Salvador 1543 Anna Maria 1694 Sao Gabriel 1497 On the table: Sovereign of the Seas 1636 - continuing after 12 years All of them are paper models
druxey Posted October 16, 2013 #38 Posted October 16, 2013 Please protect those lovely models with plastic or glass cases! Quote Be sure to sign up for an epic Nelson/Trafalgar project if you would like to see it made into a TV series http://trafalgar.tv
NAZGÛL Posted October 17, 2013 #39 Posted October 17, 2013 Jan, Im so impressed with this build. Those canons are extremely nice! Love the open doors as well. /Matti Quote Billing Boats Vasa
firdajan Posted October 29, 2013 Author #40 Posted October 29, 2013 (edited) Thank you, my friends, for your replies All parts of masts are made and bottom parts of them are placed into the ship ( I made the from maple bars using simply hand drilling machine and abrasive paper ). Tops and all small parts ( including deadeyes and blocks - I have remained a lot of them from my previous build ) are made too. Now the progress will continue quite quickly. It´s just the same routine as on any other ship model Jan Edited November 12, 2013 by firdajan janos, The Sailor, GrandpaPhil and 3 others 6 Quote Finished: Ark Royal 1588 Mary Rose 1545 Arabian Dhow Revenge 1577 ( first attempt ) La Couronne 1636 Trinidad 1519 Revenge 1577 ( the second one ) Nina 1492 Pinta 1492 Santa Maria 1492 San Salvador 1543 Anna Maria 1694 Sao Gabriel 1497 On the table: Sovereign of the Seas 1636 - continuing after 12 years All of them are paper models
DavePete Posted October 30, 2013 #41 Posted October 30, 2013 You are doing a great job! Very impressive build.. firdajan 1 Quote
WackoWolf Posted October 30, 2013 #42 Posted October 30, 2013 Beautiful work. Excellent detail. Keep the pictures coming. firdajan 1 Quote Wacko Joe Go MSW :)
ScottRC Posted November 1, 2013 #44 Posted November 1, 2013 Jan, I just came across your build and I am just impressed with your talent and style. Also, I REALLY got to try one of these models, it just looks like its a lot of fun. Look forward to seeing more! Scott firdajan 1 Quote Current Builds: Revell 1:96 Thermopylae Restoration Revell 1:96 Constitution COMPLETED Aeropiccola HMS Endeavor IN ORDINARY Planned Builds: Scientific Sea Witch Marine Models USF Essex
mtaylor Posted November 4, 2013 #45 Posted November 4, 2013 Beautiful work, Jan. firdajan 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
USS RICK Posted November 11, 2013 #46 Posted November 11, 2013 My ole friend Jan, I see you still working your majic w/card.........and I believe this is the 1st time I have seen you work w/a kit and not scratch. I look forward too more. @ this time I have a Shipyard laser cut kit of the Santa Maria 1492.........and after reading thru this thread, might have to make that my 1st build thread here. Rick firdajan 1 Quote
firdajan Posted November 12, 2013 Author #47 Posted November 12, 2013 (edited) Thank you to all, my friends, for your replies Scott: if you´re enjoying te build, it´still a lot of fun Rick: yes, this is a first time, when I´m building a ship from the kit ( and that´s the reason why I´m building it so quickly ) Next ship will be again a pure scratch ( probably...but who knows..). And, enjoy your Santa Maria I´m very lazy to take photos these days, but I made a little progress with standing rigging, especially with my lovely deadeyes ( you know...). The first row is almost finishhed. Next kilometers of rigging will follow... Jan Edited November 12, 2013 by firdajan WackoWolf, NAZGÛL, Dan Vadas and 2 others 5 Quote Finished: Ark Royal 1588 Mary Rose 1545 Arabian Dhow Revenge 1577 ( first attempt ) La Couronne 1636 Trinidad 1519 Revenge 1577 ( the second one ) Nina 1492 Pinta 1492 Santa Maria 1492 San Salvador 1543 Anna Maria 1694 Sao Gabriel 1497 On the table: Sovereign of the Seas 1636 - continuing after 12 years All of them are paper models
NAZGÛL Posted November 13, 2013 #48 Posted November 13, 2013 Looking very classy Jan! /Matti firdajan 1 Quote Billing Boats Vasa
mtaylor Posted November 15, 2013 #49 Posted November 15, 2013 Jan, Wonderful work.. I love watching your builds. firdajan 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
firdajan Posted November 19, 2013 Author #50 Posted November 19, 2013 Thanks, friends I´m slowly continuing, the ship is still growing up. Some stays, all of tops and other parts of masts are added ( it takes quite a lot of time, I fixed four stays all the evening ) Jan Dan Vadas, GrandpaPhil, ScottRC and 3 others 6 Quote Finished: Ark Royal 1588 Mary Rose 1545 Arabian Dhow Revenge 1577 ( first attempt ) La Couronne 1636 Trinidad 1519 Revenge 1577 ( the second one ) Nina 1492 Pinta 1492 Santa Maria 1492 San Salvador 1543 Anna Maria 1694 Sao Gabriel 1497 On the table: Sovereign of the Seas 1636 - continuing after 12 years All of them are paper models
ScottRC Posted November 19, 2013 #51 Posted November 19, 2013 This is such a clean looking build. I love it. Quote Current Builds: Revell 1:96 Thermopylae Restoration Revell 1:96 Constitution COMPLETED Aeropiccola HMS Endeavor IN ORDINARY Planned Builds: Scientific Sea Witch Marine Models USF Essex
firdajan Posted December 24, 2013 Author #52 Posted December 24, 2013 Hello my friends, All parts of masts are completed, shrouds and ratlines are completed too. I´m continuing with anoter parts of standing rigging - I hope to finish and start with yards till the end of this year. I WISH YOU ALL A MERRY CHRISTMAS Jan WackoWolf, NAZGÛL, DSiemens and 2 others 5 Quote Finished: Ark Royal 1588 Mary Rose 1545 Arabian Dhow Revenge 1577 ( first attempt ) La Couronne 1636 Trinidad 1519 Revenge 1577 ( the second one ) Nina 1492 Pinta 1492 Santa Maria 1492 San Salvador 1543 Anna Maria 1694 Sao Gabriel 1497 On the table: Sovereign of the Seas 1636 - continuing after 12 years All of them are paper models
Sailor1234567890 Posted December 26, 2013 #53 Posted December 26, 2013 She looks awesome. WackoWolf and firdajan 2 Quote
NAZGÛL Posted December 26, 2013 #54 Posted December 26, 2013 Excellent work! Merry Christmas to you too! /Matti firdajan 1 Quote Billing Boats Vasa
firdajan Posted December 28, 2013 Author #55 Posted December 28, 2013 Thanks friends Christmas time is over - and standing rigging is done, finally. I´ve just started with yards, completing another blocks...etc... Jan WackoWolf, DSiemens, tasmanian and 3 others 6 Quote Finished: Ark Royal 1588 Mary Rose 1545 Arabian Dhow Revenge 1577 ( first attempt ) La Couronne 1636 Trinidad 1519 Revenge 1577 ( the second one ) Nina 1492 Pinta 1492 Santa Maria 1492 San Salvador 1543 Anna Maria 1694 Sao Gabriel 1497 On the table: Sovereign of the Seas 1636 - continuing after 12 years All of them are paper models
firdajan Posted January 5, 2014 Author #56 Posted January 5, 2014 I wish you happy new year, my friends Yards are finished, completed and hanged. Now I can continue with first part of running rigging. Jan DSiemens, GrandpaPhil, hexnut and 3 others 6 Quote Finished: Ark Royal 1588 Mary Rose 1545 Arabian Dhow Revenge 1577 ( first attempt ) La Couronne 1636 Trinidad 1519 Revenge 1577 ( the second one ) Nina 1492 Pinta 1492 Santa Maria 1492 San Salvador 1543 Anna Maria 1694 Sao Gabriel 1497 On the table: Sovereign of the Seas 1636 - continuing after 12 years All of them are paper models
firdajan Posted January 7, 2014 Author #57 Posted January 7, 2014 First part of running rigging is completed. Now I have to prepare sails and sew them. Anchors are finished - just hang up them. Enjoy pictures Jan NAZGÛL, hexnut, WackoWolf and 6 others 9 Quote Finished: Ark Royal 1588 Mary Rose 1545 Arabian Dhow Revenge 1577 ( first attempt ) La Couronne 1636 Trinidad 1519 Revenge 1577 ( the second one ) Nina 1492 Pinta 1492 Santa Maria 1492 San Salvador 1543 Anna Maria 1694 Sao Gabriel 1497 On the table: Sovereign of the Seas 1636 - continuing after 12 years All of them are paper models
NAZGÛL Posted January 13, 2014 #58 Posted January 13, 2014 Man, I've missed updates! Very, very nice work! You're not far from finishing her now. Hope you had a nice x-mas and new years mate. /Matti Quote Billing Boats Vasa
firdajan Posted January 22, 2014 Author #59 Posted January 22, 2014 Hi Matti ( and all of my friends ) Sorry for the late answer, I´m quite busy at the beginning of this year. Sails are finisher and ready for completing. Two of them are hand painted by me - but not completely by my ideas... I hope to hang them through the next week. Jan mtaylor and DSiemens 2 Quote Finished: Ark Royal 1588 Mary Rose 1545 Arabian Dhow Revenge 1577 ( first attempt ) La Couronne 1636 Trinidad 1519 Revenge 1577 ( the second one ) Nina 1492 Pinta 1492 Santa Maria 1492 San Salvador 1543 Anna Maria 1694 Sao Gabriel 1497 On the table: Sovereign of the Seas 1636 - continuing after 12 years All of them are paper models
mtaylor Posted January 24, 2014 #60 Posted January 24, 2014 Lovely painting on the sails. Looks wonderful.. firdajan 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.