clearway Posted May 14, 2021 Author Share #331 Posted May 14, 2021 T.Y. Keith, THE BOOK is getting closer! Keith Quote Link to comment Share on other sites More sharing options...
clearway Posted May 17, 2021 Author Share #332 Posted May 17, 2021 work continues on the bowsprit with the lashing and bobstays now rigged , used chain as plans show shackles on the prow (rope bobstays would have been spliced through holes). Also rigged first of the forestays using a piece of bent brass as a spacer. Take care everyone and thanks for likes and comments. Keith DanielD and Keith Black 2 Quote Link to comment Share on other sites More sharing options...
clearway Posted May 23, 2021 Author Share #333 Posted May 23, 2021 Thanks for looking in folks, work continues on the foremast / bowsprit with the forestays rigged and the t'gallant stays though not lashed in properly yet... using thimbles and eyes to lash them to the hull. On the mizzen mast have fastened the driver boom in place (the parrell beads are actually cross stitch beads) holes were drilled into the jaws and stop knots used to secure them. take care all Keith Keith Black and nehemiah 2 Quote Link to comment Share on other sites More sharing options...
Keith S Posted May 24, 2021 Share #334 Posted May 24, 2021 Keith, I think I missed the part where you explained how you made your rope black using India ink. Is that what you've done here? Is it difficult? I much prefer the freshly-tarred look of your rope to the "brown" rope available from suppliers. Keith Black 1 Quote Link to comment Share on other sites More sharing options...
clearway Posted May 24, 2021 Author Share #335 Posted May 24, 2021 Hi Keith- you dilute the india ink in an old container (if it is good quality ink like Windsor & Newton go 5 parts water to 1 part ink- otherwise maybe 60/40). I unravel the thread off the spool and tamp it down into the ink/water mix, now the fun part- i take it outside and run the thread out of the tub and around one pole to the next on the washing line to dry- it's stopping the thread knotting that is the good part, also recommend gloves- its like being back in school😀. (hope that all made sense) Keith Keith S and Keith Black 2 Quote Link to comment Share on other sites More sharing options...
clearway Posted May 27, 2021 Author Share #336 Posted May 27, 2021 Thanks for looking in, we have our first sail and some running rigging (though not belayed yet). Still not sure about whether i like her with the occre sails or should i have gone bare yards🤔. Take care everyone. Keith DanielD and Keith Black 2 Quote Link to comment Share on other sites More sharing options...
clearway Posted June 5, 2021 Author Share #337 Posted June 5, 2021 thanks for looking in everyone, now have the gaff topsail fitted (though not belayed off yet) and have started on the main yards. Take care all. Keith Wahka_est, Keith Black and DanielD 3 Quote Link to comment Share on other sites More sharing options...
clearway Posted June 13, 2021 Author Share #338 Posted June 13, 2021 Thanks for looking in and likes everyone. Continuing with the mizzen mast and the boom topping lifts have been fitted , most of the rigging has been belayed now but not the boom sheet blocks as not sure where they led too (need Mr Betts book)! Also work continues on the main yard with the jack stays fitted and main sail hem stitched. Take care all, work is getting busier with less furlough which is good but equals less shipyard time ! Keith Keith Black, DanielD and nehemiah 3 Quote Link to comment Share on other sites More sharing options...
Keith S Posted June 14, 2021 Share #339 Posted June 14, 2021 (edited) She's looking great, Keith. Your workmanship is to a very high standard. Your approach to the running rigging is very sensible too. I like the eyebolt your driver sheet attaches to, in the transom. It's the simplest option, therefore likely the correct one. Edited June 14, 2021 by Keith S Keith Black and clearway 2 Quote Link to comment Share on other sites More sharing options...
clearway Posted June 14, 2021 Author Share #340 Posted June 14, 2021 Thanks Keith- it's where the cleats to tie of the boom sheet are located which is causing doubt at the moment - also your little Terror is pretty outstanding too especially as it is your first model ship build 😉. Keith Keith Black and nehemiah 2 Quote Link to comment Share on other sites More sharing options...
mtdoramike Posted June 18, 2021 Share #341 Posted June 18, 2021 Absolutely beautiful work. clearway and Keith Black 2 Quote Link to comment Share on other sites More sharing options...
clearway Posted June 20, 2021 Author Share #342 Posted June 20, 2021 Ty Mike and thanks for the likes and looking in as always everyone. Bar the driver boom sheets all the running rigging on the mizzen mast is tied off and coiled, also rigged the mizzen backstays (just need halliards tidied up). On the main mast i have started on the chain slings and rigged the main sail to the yard. Take care all Keith Keith Black, HakeZou and ObviousNewbie 3 Quote Link to comment Share on other sites More sharing options...
clearway Posted July 1, 2021 Author Share #343 Posted July 1, 2021 Thanks for looking in everyone, the mainyard/ sail are nearly ready to go in place. When dry the thread on the yard trusses will be trimmed back and the chain sling around the yard will need added. Not sure if i am right here but looks like Matthew Betts long awaited book has been delayed as i have it on order, but the website has gone from in stock to pre order with an October release date! Take care all Keith Keith Black, HakeZou, ObviousNewbie and 1 other 4 Quote Link to comment Share on other sites More sharing options...
clearway Posted July 4, 2021 Author Share #344 Posted July 4, 2021 thanks for looking in peeps, not much progress with Terror due to work and family commitments. However have managed to get the main yard hung (just by the chain slings at the moment) the trusses have been led through the eyes formed in the other truss if that makes sense, but will need to lead through a block from an eyebolt in the after trestletrees, then to a natural coloured thread to the pinrails via blocks. at first the sail looked way too short as i had hung it from the jackstay as opposed to under side of yard, but then thought "actually it will need to clear the midship davits so i think all is good! Take care all Keith HakeZou, Wahka_est, Keith S and 1 other 4 Quote Link to comment Share on other sites More sharing options...
clearway Posted July 12, 2021 Author Share #345 Posted July 12, 2021 thanks for popping in for a look everyone, managed a little more work on Terror with the trusses now rigged through the blocks under the yards and rigged the blocks on the end of the yards for the lifts. Will leave final belaying of these til i have rigged the topsail as the topsail sheet is the only part of the rigging which will pull the yard down (everything else pulls it upwards). take care all. Keith Keith Black, HakeZou and ObviousNewbie 3 Quote Link to comment Share on other sites More sharing options...
PRS Posted July 12, 2021 Share #346 Posted July 12, 2021 WOW Really like the looks of the ratlines. Keith Black and clearway 2 Quote Paul Current Build: HMS Winchelsea 1764 1:48 Completed Build: HM Cutter Cheerful-Syren Ship Models 1/48 Completed Build: Artesania Latina Bluenose II Completed Build : Lady Nelson Link to comment Share on other sites More sharing options...
clearway Posted July 15, 2021 Author Share #347 Posted July 15, 2021 Thanks Paul and for likes / looking in everyone . Little more accomplished with the main yard lifts now rigged (as per Lees masting and rigging), as mentioned in previous post wont be belayed until i get the topsail sheets rigged. take care all Keith Keith Black, Keith S and ObviousNewbie 3 Quote Link to comment Share on other sites More sharing options...
Icksa Posted July 17, 2021 Share #348 Posted July 17, 2021 On 5/16/2020 at 2:14 PM, clearway said: Thanks for views likes and comments everyone- because the planking strips supplied with the kit arn't long enough i dug out some left over from previous billings builds Hello Keith: Incredible work, I am new to the hobby and am starting this model as my second build. I noticed this comment when you were installing the first layer of planking. I just received my kit today and wanted to report for future modelers that the planks now appear to be long enough to extend the entire length of the ship (60 cm). Maybe they read your posts and made an adjustment? You're log is an excellent reference, thanks! nehemiah, clearway and Keith Black 3 Quote Link to comment Share on other sites More sharing options...
clearway Posted July 18, 2021 Author Share #349 Posted July 18, 2021 (edited) On 7/17/2021 at 2:15 AM, Icksa said: Hello Keith: Incredible work, I am new to the hobby and am starting this model as my second build. I noticed this comment when you were installing the first layer of planking. I just received my kit today and wanted to report for future modelers that the planks now appear to be long enough to extend the entire length of the ship (60 cm). Maybe they read your posts and made an adjustment? You're log is an excellent reference, thanks! Thanks and sounds like they might have listened! Don't forget to checkout keith s and daniel d' s Terror build log as we have been bouncing ideas off each other for over a year now and his build is pretty spectacular too. Keith Edited July 18, 2021 by clearway missed info nehemiah and Keith Black 2 Quote Link to comment Share on other sites More sharing options...
clearway Posted August 1, 2021 Author Share #350 Posted August 1, 2021 thanks for looking in and comments/ likes everyone. not much happening with terror at the moment, but have nearly finished the main topsail yard. take care everyone. Keith Keith Black 1 Quote Link to comment Share on other sites More sharing options...
clearway Posted August 12, 2021 Author Share #351 Posted August 12, 2021 Back in shipyard for awhile today and managed to finish the main tops'l yard. Next will have to stitch the seams on the sail and add the reefing ropes. on a different topic for the first time in 18 months my son and myself took a trip down to Keighley and Worth Valley Steam Railway, we also took my step mum along, it was really nice seeing mams, dads, grandparents and children all smiling and enjoying the experience (even the very young boy who ran to his mother shouting "mam mam the trains on fire" his mother had to explain the basics of steam engines and the fire/ steam principle)! Take care all and have fun Keith Keith Black, nehemiah and Keith S 3 Quote Link to comment Share on other sites More sharing options...
Keith S Posted August 13, 2021 Share #352 Posted August 13, 2021 I haven't done much work on my Terror this summer. The season is simply too short here, and even if the weather isn't the greatest, it's a shame to spend time working on indoor hobbies while it's even remotely habitable outside. As for your other pictures: I love British steam trains. I even built one several winters ago. It turns out I will build a model of literally anything. Keith Black, Ian_Grant and clearway 3 Quote Link to comment Share on other sites More sharing options...
clearway Posted August 13, 2021 Author Share #353 Posted August 13, 2021 nice work Keith- unfortunately i live to far from the narrow gauge railways in wales for a day trip, but we do have the Ravenglass & Eskdale Rly (a.k.a. "la'al ratty) miniture 15" gauge railway which runs 8 miles from ravenglass to eskdale near Scaffell Pike (if local pronounce it scawfell) 😉. Keith Keith S and Keith Black 2 Quote Link to comment Share on other sites More sharing options...
clearway Posted August 19, 2021 Author Share #354 Posted August 19, 2021 Thanks for looking in and the likes/ comments everyone. Got a few days off work while the admiral and daughter visit relatives + rain with bits of rain then showers so moved my workshop onto dining room table and managed to get the main topsail hoisted though still need to rig the halliards, sheets etc etc. Take care all Keith ObviousNewbie, HakeZou, GrandpaPhil and 2 others 5 Quote Link to comment Share on other sites More sharing options...
clearway Posted September 11, 2021 Author Share #355 Posted September 11, 2021 Thanks for the likes and looking in everyone. have got the truss pendants, main yard lifts, main tops'l sheets and main tops'l lifts belayed (not coiled yet), rigged as per Lees masting and rigging. Note i havn't glued the chimney for the steam engine in place along with the skid beams to ease rigging in this crammed space! take care all Keith Keith S, GrandpaPhil, ObviousNewbie and 2 others 5 Quote Link to comment Share on other sites More sharing options...
clearway Posted September 19, 2021 Author Share #356 Posted September 19, 2021 thanks for all the likes and looking in as always everyone, managed a little more on Terror this weekend with the clewlines rigged on the main topsail, the ropes on the main mast pinrail all belayed and coiled and the main topgallant yard ready for the footropes and sail to be added. Take care everyone. Keith ObviousNewbie, Keith S, GrandpaPhil and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Keith S Posted September 20, 2021 Share #357 Posted September 20, 2021 Incredible perseverance. What an inspiration your rigging is turning out to be. clearway and Keith Black 2 Quote Link to comment Share on other sites More sharing options...
clearway Posted September 20, 2021 Author Share #358 Posted September 20, 2021 Many thanks Keith- that's not the words i use to describe it at the time though!😜 You will be noticing like me that the nights are starting to close in and winter is creeping up on us- though thanks to gulf stream we can get some nice but shorter days up to November time. Keith Keith Black and Keith S 2 Quote Link to comment Share on other sites More sharing options...
clearway Posted September 22, 2021 Author Share #359 Posted September 22, 2021 back in the shipyard and the topgallant yard is hoisted, though the halliard still need rigged as well as sheets, lifts etc.once the halliard is rigged i will rig the topsail halliards and backstay (not rigged yet to allow easier access to pinrails). take care everyone. Keith GrandpaPhil and Keith Black 2 Quote Link to comment Share on other sites More sharing options...
clearway Posted September 23, 2021 Author Share #360 Posted September 23, 2021 work continues on the topgallant with the sheets and halliard rigged (still need excess thread trimmed and coiled at pin rail). the piece of dowel in the bows will be the foreyard. Keith ObviousNewbie, Keith Black, GrandpaPhil and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.