Unegawahya Posted January 18 Author #151 Posted January 18 6 hours ago, Der Alte Rentner said: It will most likely be a year or more before I get to this point , but going by the principal of, better to have it and not need it than need it and not have it, I will gratefully accept your offer! ( I'm pretty sure that Gregg will also be chiming in shortly..) BTW, Beautiful workmanship. thanks. Ok here are my three files for the boats. I hope they work as well for you!36'%20Pinnace.pdf28'%20GIg%20Whaleboat.pdf28'%20Whaleboat.pdf GGibson and Der Alte Rentner 2
Der Alte Rentner Posted January 18 #152 Posted January 18 Thank you Unegawahya. ( I see that Gregg got here before me.. 😁) Unegawahya 1
Unegawahya Posted January 20 Author #153 Posted January 20 I got a little more work done on my 36’ Pinnace this weekend! It doesn’t help that I almost cut off the tip on my thumb yesterday. Geoff Matson, davec, vossiewulf and 4 others 6 1
GGibson Posted January 20 #154 Posted January 20 37 minutes ago, Unegawahya said: It doesn’t help that I almost cut off the tip on my thumb yesterday. Nice looking Pinnacle, sir. Couldn't have cut off too much thumb. I don't see any red stain on the ship. 🤷♂️👍🤣 Coyote_6 and Der Alte Rentner 2 Gregg Current Projects: Completed Projects: Waiting for Shipyard Clearance: Santa Maria Caravelle 1:48 - Ships of Pavel Nikitin Norwegian Sailing Pram 1:12 - Model Shipways USS Constitution 1:76 - Model Shipways Muscongus Bay Lobster Smack 1:24 - Model Shipways Yacht America Schooner 1851 1:64 - Model Shipways H.M. Schooner Ballahoo 1:64 - Caldercraft RMS Titanic 1:300 - OcCre (May now never get to it) Bluenose 1921 1:64 - Model Shipways
Unegawahya Posted January 20 Author #155 Posted January 20 1 hour ago, GGibson said: Nice looking Pinnacle, sir. Couldn't have cut off too much thumb. I don't see any red stain on the ship. 🤷♂️👍🤣 I was thinly slicing oranges. I had a flap of skin hanging off the end of my thumb. I had just sharpened the knife too! GGibson and Der Alte Rentner 1 1
JSGerson Posted January 20 #156 Posted January 20 Blood, sweat, and tears is what it takes! It's looking great! Jon Unegawahya and Der Alte Rentner 2 Current Build: Model Shipways USS Frigate Constitution Past Builds: Bob Hunt's kitbash of the Mamoli Rattlesnake Model Shipways Typical Ship’s Boat for the Rattlesnake Mini-Mamoli solid hull British Schooner Evergreen Model Airways Albatros D.Va - 1917, The Red Baron's Forgotten Fighter Member: Nautical Research Guild
Geoff Matson Posted January 20 #157 Posted January 20 Great job on the boat! Unegawahya and Der Alte Rentner 2 Geoff NRG member #2666Current build : USS Constitution Finished builds: Armed Virginia Sloop (in gallery)
Unegawahya Posted April 4 Author #158 Posted April 4 I’m finally getting some time to work on my Constitution again! I apologize for my absence but now that the two commissions and the plane I started in October are done I’m hoping to have at least a little more time to build! I’ve gotten a lot closer to completing my 36’ Pinnace and I’m mostly finishing up the details! Coyote_6, Ryland Craze, Stevenleehills and 1 other 4
Unegawahya Posted April 7 Author #160 Posted April 7 I’ve gotten a little more progress on my 36” Pinnace today! I jut need to make the cleats and the rudder. I also need to decide if I’m going to have the ores or if I’m going to leave them off. hamilton, Stevenleehills, PaddyO and 5 others 8
Unegawahya Posted 12 hours ago Author #161 Posted 12 hours ago My scratch built 36’ pinnace base is now done and I have it installed on my 1/76 scale Model Shipways USS Constitution! Stevenleehills, Coyote_6, GGibson and 2 others 1 4
JSGerson Posted 11 hours ago #162 Posted 11 hours ago Beautiful and the rigging securing the boat to the the hatch is nice and clean. Well done! Jon Coyote_6 1 Current Build: Model Shipways USS Frigate Constitution Past Builds: Bob Hunt's kitbash of the Mamoli Rattlesnake Model Shipways Typical Ship’s Boat for the Rattlesnake Mini-Mamoli solid hull British Schooner Evergreen Model Airways Albatros D.Va - 1917, The Red Baron's Forgotten Fighter Member: Nautical Research Guild
Der Alte Rentner Posted 8 hours ago #163 Posted 8 hours ago I'll ask again. Would you like to become a subcontractor for these? The
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now