Pete D Posted January 31, 2021 #1 Posted January 31, 2021 Finally ready to do this build log . I attempt to keep it all short and to the point . Received HMs Beagle , opened up to check the contents and condition. Checked to see if there was any damage or anything had warped during the packaging , transport etc . All seemed ok Cathead, maddog33 and uncarina 3 Quote
Pete D Posted January 31, 2021 Author #2 Posted January 31, 2021 Started the build. Dry fitted the hull pieces . All good so glued , pretty simple Fernando E, Cathead, uncarina and 1 other 4 Quote
Pete D Posted January 31, 2021 Author #3 Posted January 31, 2021 Started to plank the deck. This is where I made my first error . I chose the thicker lime wood , as opposed to the veneer that I was supposed to . I had already glued and clamped it all when I realised the mistake . So I left it as is , I figured it would not affect anything in the grand scheme of things Fernando E and Cathead 2 Quote
Pete D Posted January 31, 2021 Author #4 Posted January 31, 2021 Finished the deck. I chose to do the pencil lines , seemed to work ok. After applying the matt varnish turned out ok uncarina, Cathead, Fernando E and 1 other 4 Quote
Moab Posted January 31, 2021 #5 Posted January 31, 2021 Looking good Peter...Moab Quote Completed Builds: Virginia Armed Sloop...Model Shipways Ranger...Corel Louise Steam Launch...Constructo Hansa Kogge...Dusek Yankee Hero...BlueJacket Spray...BlueJacket 26’ Long Boat...Model Shipways Under Construction: Emma C. Berry...Model Shipways
Fernando E Posted January 31, 2021 #6 Posted January 31, 2021 I've got this model on the shelf...will be next when I finish the Perseverance which is still on the workbench! I'll follow along for the ride. Cheers.............Fernando Quote Current Builds - Colonial Brig Perseverance 1807 by Fernando E - Modellers Shipyard - 1:48 scale Previous Builds - S Lucia by Fernando E - Panart - Scale 1:30 Sloop Norfolk 1798 by Fernando E - Modellers Shipyard - Scale 1:36
Pattington Posted January 31, 2021 #7 Posted January 31, 2021 Just finished my own first build and I've got this one on deck. Definitely gonna follow along here and maybe even try to keep pace. Good luck! Quote
Pete D Posted February 2, 2021 Author #8 Posted February 2, 2021 I have gone ahead and glued the main deck onto the hull , and clamped it down so as to attach securely Cathead, uncarina and Fernando E 3 Quote
Pete D Posted February 2, 2021 Author #9 Posted February 2, 2021 While I was waiting for the glue to set , I made up a jig to bend the bulwarks . maddog33, Cathead and Fernando E 3 Quote
Pete D Posted February 2, 2021 Author #10 Posted February 2, 2021 Placed the bulkheads , lined and coated them with matt varnish. I attached the doors and windows to the relevant bulkheads . and finally got to attach the bow and stern decks , strapped them down to attach securely . Rubber bands work wonders on areas that are not always squared uncarina, Clark Griswold, Fernando E and 1 other 4 Quote
Pete D Posted February 2, 2021 Author #11 Posted February 2, 2021 All the decks set . And the bulwarks came out pretty neat . I will attempt to fit them during this week if life does not get in the way maddog33, Fernando E, uncarina and 1 other 4 Quote
uncarina Posted February 2, 2021 #12 Posted February 2, 2021 Great start, and I will be following closely. Cheers, Tom Quote
The Gimps Chimp Posted February 4, 2021 #13 Posted February 4, 2021 Looks like you've made a great start to the build and are make fine progress. I'm doing the same build but having a few issues along the way. I don't find the instruction too helpful so I tend to just use them as a pointer. I'm very interested to see how you progress so will keep a close eye on your build log. Chimp Quote Current Build: .... Previous Builds: HMS Beagle - OcCre, HM Schooner Ballahoo - Caldercraft
Pete D Posted February 7, 2021 Author #14 Posted February 7, 2021 I have finished the first planking . I used a jig I made to bend the planks beforehand , so were ready for use when the time came . I attempted to follow the pattern as in the diagrams , but got lost in the detail I think . Bow turned out a bit messy , stern looks okay . I will attempt to repair the damage during the sanding process uncarina and Ryland Craze 2 Quote
Pete D Posted February 7, 2021 Author #15 Posted February 7, 2021 Finished the repairing and sanding of the hull . I confess I used some woodfiller for the larger areas before sanding , but guessed as this planking would be covered by another layer it would not be seen. I think it turned out ok . Ready to start the top layer of planking soon. ccoyle, Fernando E, The Gimps Chimp and 3 others 6 Quote
Pete D Posted February 7, 2021 Author #16 Posted February 7, 2021 On 2/4/2021 at 7:22 AM, The Gimps Chimp said: Looks like you've made a great start to the build and are make fine progress. I'm doing the same build but having a few issues along the way. I don't find the instruction too helpful so I tend to just use them as a pointer. I'm very interested to see how you progress so will keep a close eye on your build log. Chimp You seem to be doing great on your build . I try and follow the instructions then see if the video is of assistance . Between the 2 options I try and work it out The Gimps Chimp 1 Quote
Pete D Posted February 7, 2021 Author #17 Posted February 7, 2021 On 1/30/2021 at 6:03 PM, Moab said: Looking good Peter...Moab Thanks , its only the start Quote
Pete D Posted February 13, 2021 Author #18 Posted February 13, 2021 Started the top layer of planking . Its a little different to what I had on the last build as this layer is really thin and needs to be handled carefully . once O got used to working with it , steady progress has been made . Just left with the "patching" Fernando E and uncarina 2 Quote
Pete D Posted February 13, 2021 Author #19 Posted February 13, 2021 Finally finished with the final planking . Fairly satisfied with the result . Will have to do repairs after the sanding Dean77, uncarina, Matt D and 1 other 4 Quote
Pete D Posted February 13, 2021 Author #20 Posted February 13, 2021 Sanding done . Had to repair a few places as some of the top layer wood is really brittle , and there seems to be a variety of finishing on the wood. some do not have as good an edge . I'm starting to fit the ribbons on the outside . To make the bend I used the same template I made earlier that bent the bulwarks and the first planking . Left it in the winter sunshine to dry out before I used it uncarina and Fernando E 2 Quote
Pete D Posted February 13, 2021 Author #21 Posted February 13, 2021 Finished the ribbons . Now the build is starting to look like something . Had a small issue when a part of the ribbon that was cut out at one of the aft portholes , fell inside . Took forever trying to locate it , lots of shaking etc. Eventually managed to blow it out using compressed air in a can . uncarina and Clark Griswold 2 Quote
Pete D Posted February 13, 2021 Author #22 Posted February 13, 2021 Placed the ribbons on the deckside . Clark Griswold, Fernando E and uncarina 3 Quote
Pete D Posted February 13, 2021 Author #23 Posted February 13, 2021 I applied matt varnish to everything to seal it . Actually made the different colors stand out . Almost seems a sin to paint all over it Clark Griswold, uncarina, maddog33 and 1 other 4 Quote
uncarina Posted February 13, 2021 #24 Posted February 13, 2021 Impressive work Pete! Just got this kit myself so I am really enjoying your progress. Cheers, Tom Quote
Pete D Posted February 13, 2021 Author #25 Posted February 13, 2021 20 hours ago, uncarina said: Impressive work Pete! Just got this kit myself so I am really enjoying your progress. Cheers, Tom Thanks Quote
uncarina Posted February 15, 2021 #26 Posted February 15, 2021 Will you be adding copper plating as well? Cheers, Tom Quote
Pete D Posted February 16, 2021 Author #27 Posted February 16, 2021 On 2/14/2021 at 5:40 PM, uncarina said: Will you be adding copper plating as well? Cheers, Tom No, I'm just going to do the recommended painting scheme. My next build I may select a ship that has the copper plating uncarina 1 Quote
Pete D Posted February 16, 2021 Author #28 Posted February 16, 2021 Here's the work in progress with the painting . Took a little longer than expected . Painting everything black then makes it really difficult to get the white going , takes extra coats.....maybe would have been more expedient to just paint them separately. It all worked out in the end The Gimps Chimp, Dean77, Clark Griswold and 2 others 5 Quote
Pete D Posted February 17, 2021 Author #29 Posted February 17, 2021 Hi. Painted and fitted the strips , davits and constructed the transom. Tried my hand at the decorative work with the gardens and brass . Came out pretty good I think . Onward and upward as it is said.... The Gimps Chimp, uncarina, Dean77 and 1 other 4 Quote
Krupi Posted February 19, 2021 #30 Posted February 19, 2021 (edited) Hi Pete, Looking great, just started on this kit myself. What Matt Varnish are you using? Edited February 19, 2021 by Krupi Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.