Lee J H Posted October 6, 2021 Share #1 Posted October 6, 2021 Spoiler It's a new VASA from Artesania, with a scale of 1/65, which is significantly sized against the Vasa of other kit companies. If the advantage of laser cut fits well, and the disadvantage is that it sands the bonding part. I have to work on it, but it has more advantages. The creators of the pramodel seem easy to adapt to than the old kit. Artesania Latina, ccoyle, Archi and 1 other 3 1 Quote Link to comment Share on other sites More sharing options...
Lee J H Posted October 6, 2021 Author Share #2 Posted October 6, 2021 This time, follow the order listed in the documention. Cut the black paper thinly and place it between the decks. For me, using paper seems to be the best thing in the results, even if it takes a while. Teak oil was used as a finishing agent. Old Collingwood, Ian B, Michiel Frirz and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Lee J H Posted October 6, 2021 Author Share #3 Posted October 6, 2021 Try filling the balsa tree. I think it would be pointless to buy and fill that expensive tree. It's become a habit to fire and fill large ships. It feels like a container line... Half of that firing amount has been added to the cumbersome task of grinding. When you're done, it's good to feel comfortable from the time you plan your second round. Jeff T, Old Collingwood, Baker and 5 others 8 Quote Link to comment Share on other sites More sharing options...
baskerbosse Posted October 6, 2021 Share #4 Posted October 6, 2021 Looks great! Looking at the hull lines, especially the last picture in the first post, they look good. Much more accurate than especially Corel .. Cheers, Peter Old Collingwood 1 Quote Link to comment Share on other sites More sharing options...
Lee J H Posted October 6, 2021 Author Share #5 Posted October 6, 2021 4 minutes ago, baskerbosse said: Looks great! Looking at the hull lines, especially the last picture in the first post, they look good. Much more accurate than especially Corel .. Cheers, Peter Yes, it's more accurate than Corel. However, it is regrettable that the plank tree is not good. I plan to change the tree. Old Collingwood 1 Quote Link to comment Share on other sites More sharing options...
Lee J H Posted October 6, 2021 Author Share #6 Posted October 6, 2021 Archi, marktiedens, ubjs and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Kevin Posted October 6, 2021 Share #7 Posted October 6, 2021 the bulkheads look very thin and fragile, i agreee with the balsa infills is a template in the kit for marking out the gunport locations Old Collingwood 1 Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - On hold MHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024 Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat Link to comment Share on other sites More sharing options...
Lee J H Posted October 6, 2021 Author Share #8 Posted October 6, 2021 1 hour ago, Kevin said: The partition wall is thin, so it seems that the walls should be made thin. Thank you for your support. Old Collingwood and Kevin 2 Quote Link to comment Share on other sites More sharing options...
baskerbosse Posted October 6, 2021 Share #9 Posted October 6, 2021 Very nice run of the planking. Is this model double planked? Old Collingwood 1 Quote Link to comment Share on other sites More sharing options...
Lee J H Posted October 6, 2021 Author Share #10 Posted October 6, 2021 (edited) 2 hours ago, baskerbosse said: Very nice run of the planking. Is this model double planked? Thank you. That's right. We did the first Planking operation. The second round remains. Edited October 6, 2021 by Lee J H Old Collingwood 1 Quote Link to comment Share on other sites More sharing options...
baskerbosse Posted October 7, 2021 Share #11 Posted October 7, 2021 Nice! Be careful with the gunports though. The sills should be parallel to the deck, not the waterline. Peter Old Collingwood 1 Quote Link to comment Share on other sites More sharing options...
Lee J H Posted October 7, 2021 Author Share #12 Posted October 7, 2021 12 hours ago, baskerbosse said: Nice! Be careful with the gunports though. The sills should be parallel to the deck, not the waterline. Peter I sometimes have doubts about Kit's instructions. This is because it is usually tailored to the waterline. This also works while maintaining a right angle, but it is tailored to the waterline. I'll be careful next time. Thank you. Old Collingwood 1 Quote Link to comment Share on other sites More sharing options...
Hubac's Historian Posted October 15, 2021 Share #13 Posted October 15, 2021 I just recently discovered that AL has put out this kit. I am interested to see how what the quality of the kit is, relative to Deagostini. You are off to a marvelous start! Old Collingwood 1 Quote We are all works in progress, all of the time. Link to comment Share on other sites More sharing options...
Lee J H Posted October 26, 2021 Author Share #14 Posted October 26, 2021 On 2021. 10. 15. at 오전 11시 46분, Hubac's Historian said: 나는 최근에 AL이 이 키트를 내놓았다는 것을 발견했습니다. Deagostini와 비교하여 키트의 품질이 어떤지 알고 싶습니다. 당신은 놀라운 출발을 시작했습니다! I've never used Deagostini before. By the way, a friend says it's the same product. There is a problem. It is inconvenient because there is no paper drawing. Thank you for your support. Old Collingwood 1 Quote Link to comment Share on other sites More sharing options...
ubjs Posted October 27, 2021 Share #15 Posted October 27, 2021 I have Deagostini-kit and I think it is the same as AL:s. You could read this forum before building next steps: https://forum.model-space.co.uk/default.aspx?g=topics&f=540 You have the official build diary of Deagostini Vasa there and some members builds. Old Collingwood and Lee J H 1 1 Quote Link to comment Share on other sites More sharing options...
Lee J H Posted October 29, 2021 Author Share #16 Posted October 29, 2021 On 10/27/2021 at 6:46 PM, ubjs said: I have Deagostini-kit and I think it is the same as AL:s. You could read this forum before building next steps: https://forum.model-space.co.uk/default.aspx?g=topics&f=540 You have the official build diary of Deagostini Vasa there and some members builds. I went to the site now. I think it'll be a good teaching for me. Thank you so much for your help. Old Collingwood 1 Quote Link to comment Share on other sites More sharing options...
Lee J H Posted October 29, 2021 Author Share #17 Posted October 29, 2021 I work on the rear part. Old Collingwood, Baker and GrandpaPhil 3 Quote Link to comment Share on other sites More sharing options...
Lee J H Posted October 29, 2021 Author Share #18 Posted October 29, 2021 GrandpaPhil, Old Collingwood, mtaylor and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Lee J H Posted October 29, 2021 Author Share #19 Posted October 29, 2021 I worked on the firework with a thick walnut tree. Baker, GrandpaPhil, ccoyle and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Hubac's Historian Posted October 29, 2021 Share #20 Posted October 29, 2021 Nice planking job! mtaylor and Old Collingwood 2 Quote We are all works in progress, all of the time. Link to comment Share on other sites More sharing options...
md1400cs Posted October 30, 2021 Share #21 Posted October 30, 2021 Lee, You are off to a very good start - will follow along as well. Regards, Old Collingwood 1 Quote Michael Current build : Sovereign of the Seas 1/78 Sergal Under the table: Golden Hind - C Mamoli Oseberg - Billings 720 - Drakkar - Amati Completed: Santa Maria-Mantua -- Vasa-Corel - Santisima Trinidad cross section OcCre 1/90th Gallery : Santa Maria - Vasa - Link to comment Share on other sites More sharing options...
Lee J H Posted October 31, 2021 Author Share #22 Posted October 31, 2021 20 hours ago, md1400cs said: Lee, You are off to a very good start - will follow along as well. Regards, I'm so flattered. I've seen your wonderful corel Wasa. I will work hard, but I don't know if it will be completed well. Please give me a lot of advice. Old Collingwood and md1400cs 2 Quote Link to comment Share on other sites More sharing options...
Lee J H Posted October 31, 2021 Author Share #23 Posted October 31, 2021 On 10/30/2021 at 8:49 AM, Hubac's Historian said: Nice planking job! Thank you for your support. Old Collingwood 1 Quote Link to comment Share on other sites More sharing options...
md1400cs Posted November 8, 2021 Share #24 Posted November 8, 2021 Lee, Thanks for your kind words - will be very happy to assist with anything that you might require .... Old Collingwood 1 Quote Michael Current build : Sovereign of the Seas 1/78 Sergal Under the table: Golden Hind - C Mamoli Oseberg - Billings 720 - Drakkar - Amati Completed: Santa Maria-Mantua -- Vasa-Corel - Santisima Trinidad cross section OcCre 1/90th Gallery : Santa Maria - Vasa - Link to comment Share on other sites More sharing options...
Lee J H Posted December 5, 2021 Author Share #25 Posted December 5, 2021 (edited) Edited December 5, 2021 by Lee J H Old Collingwood, Henke, GrandpaPhil and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Hubac's Historian Posted December 5, 2021 Share #26 Posted December 5, 2021 Very nice! Old Collingwood 1 Quote We are all works in progress, all of the time. Link to comment Share on other sites More sharing options...
Lee J H Posted December 19, 2021 Author Share #27 Posted December 19, 2021 Start the 1st planing. Use a walnut 1mm wood different from the contents. Start at the location indicated in the tutorial. However, it is also a bit of a strange location. Archi and Old Collingwood 2 Quote Link to comment Share on other sites More sharing options...
Lee J H Posted December 19, 2021 Author Share #28 Posted December 19, 2021 First, let's proceed like this. Barbossa, Hubac's Historian, jks1981 and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Hubac's Historian Posted December 19, 2021 Share #29 Posted December 19, 2021 Looks awesome! The walnut will make for nice color and finish. Old Collingwood 1 Quote We are all works in progress, all of the time. Link to comment Share on other sites More sharing options...
Lee J H Posted December 19, 2021 Author Share #30 Posted December 19, 2021 45 minutes ago, Hubac's Historian said: Thank you. hubac. Please understand even if your English is not good. I think so too. Walnut is difficult to handle, but the color is profound and nice Hubac's Historian 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.