Jump to content

Gorch Fock by TonyUK - FINISHED - Mantua - Scale 1:90


Recommended Posts

Hi everyone, I am new here, and am just starting my first model ship.

 

After reading masses of information online, studying the instructions, labelling the parts and getting all my tools, I finally made a start yesterday. I glued the stand together, and removed the lazer cut frames and keel from the plywood sheets and a slotted them all together.

 

I have a question already, should I taper the edges of the frames (to allow the planking to sit properly) BEFORE or after I glue the frames into place? Maybe a bit of both?

 

Thanks in advance.

Link to comment
Share on other sites

In my Mantua kit, it has printed in the box "the laser engraved wooden sheet replaces the original photo etched brass sheet, it is felt blah blah"

 

With the photo etched doors/windows I understand you would paint them white (in my case) and then sand them to reveal the non etched parts?

Just wondering, what am I supposed to do with these wooden ones? The doors need to be white, but what of the etched bits around the edge?

Any help/ideas appreciated.

post-14546-0-48975000-1408558044_thumb.jpg

Edited by TonyUK
Link to comment
Share on other sites

  • 8 months later...

Hi Toni Nice to see another Gorch Fock underway - Im at the rigging stage with mine  - fun ship to build - mine is an Occre Kit !!!

Link to comment
Share on other sites

  • 3 months later...
  • 7 months later...

Nice work so far Tony, :)

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

Thanks very much Nils.

 

Your build updates are the first thing I look for whenever i visit the site.....brilliant and inspirational!

 

My kit build has been slow and steady over nearly 2 years, but i am nearly finished. Goodness knows how many hours i have spent working on it, but... i'm not counting!

Rather than watching the box, i put some music on and sit at my work bench and try do the best i can with every part of the build, i know it cant be perfect, but make it as best i can. It has become a labour of love. (Apart from doing the 100's of ratline knots!)

 

Here are some more pictures from along the way.

 

post-14546-0-69875800-1461107695_thumb.jpg

 

post-14546-0-54907400-1461107752_thumb.jpg

 

post-14546-0-41676200-1461108270_thumb.jpg

 

post-14546-0-03751100-1461108347_thumb.jpg

 

post-14546-0-26398300-1461108424_thumb.jpg

 

post-14546-0-70628600-1461108445_thumb.jpg

 

post-14546-0-82197200-1461108509_thumb.jpg

 

post-14546-0-69496300-1461108544_thumb.jpg

 

post-14546-0-62734800-1461108568_thumb.jpg

 

post-14546-0-01382000-1461108722_thumb.jpg

 

post-14546-0-22435400-1461109019_thumb.jpg

 

post-14546-0-92314200-1461109039_thumb.jpg

 

post-14546-0-85778600-1461109054_thumb.jpg

 

post-14546-0-53413400-1461109077_thumb.jpg

 

post-14546-0-56124400-1461109089_thumb.jpg

 

 

Link to comment
Share on other sites

Thanks Tomasg.

 

As its my first build, I don't really know how the quality compares to other kit manufacturers.

 

The Mantua kit, which I managed to get for half the RRP, seemed pretty good to me. Good quality materials, clear plans, but not particularly helpful instructions (amusingly translated from the Italian by someone who might just have about passed a GCSC in English), they seem to just suggest the order in which to build the ship. Though half of the fun of building a model like these is working out how to do it. And with the vast resources available online, that was easy enough.

 

The kit did have a few things missing, not enough portholes, dowls, eyelets and some of the decorative wooden strips missing. Though these were easy and cheap to buy.

Other than that I'd recommend it.

Cheers

Link to comment
Share on other sites

Hi Tony

 

i have a lot of experience with the Mantua family kits (Sergal, Panart), in fact all my six kits where from them, mostly because there is a shop that sells then not far from where i live and i prefer to buy them there since they also have Mantua wood and accessories. I must say i am surprised that parts where missing, usually there where extra parts in my kits, not to mention the wood, always in excess.

 

Now that i know that it was your first build i must say i am even more impressed!

 

Tomas

Link to comment
Share on other sites

nice work Tony,

 

your GF is coming on pretty well, stanchions and railing wires, standing riggings and ratlines look great...

 

Nils

Current builds

-Lightship Elbe 1

Completed

- Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild

"Zeesboot"  heritage wooden fishing small craft around 1870, POB  clinker scratch build scale 1:24

Pilot Schooner # 5 ELBE  ex Wanderbird, scale 1:50 scratchbuild

Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build

Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) 

"SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild)
"HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan 

-"Pamir" 4-mast barque, P-liner, 1:96  (scratchbuild)

-"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) 

"Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild)  original was my grandfathers ship

-"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 

"Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32

under restoration / restoration finished 

"Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50

Link to comment
Share on other sites

  • 1 year later...
  • 1 year later...

Looks  really nice, I like it.

Joachim

My new Book in ENGLISH and GERMAN available:

"The colour blue in historic shipbuilding"

http://www.modellbau-muellerschoen.de/buch-en.htm

 

Current build   Amerigo Vespucci    http://modelshipworld.com/index.php?/topic/836-amerigo-vespucci-by-schiffebastler-mantua-model-scale-184-italien-sail-training-ship-build-1931/

See also our german forum for Sailing Ship Modeling and History:

http://www.segelschiffsmodellbau.com/

Link to comment
Share on other sites

Fabulous build Tony

This is a beutiful Ship - I completed the Gorsh Fock, by Occre about a year ago - I am just putting the finishing touches on Ameriogo Vesspucci by Mantua - like you said the assembly instructions leave a lot to the imagination

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...