Jump to content
MSW Spring Donation Drive

vossy

Members
 View Profile  See their activity

  • Posts

    590

  • Joined

  • Last visited

 Content Type 

Everything posted by vossy

  1. vossy
    I have always found that a small modellers tack hammer does a better job. Chris
  2. vossy
    I wish someone, anyone, could post instructions or video's on how to use Chuck's ropewalk. I have one of these (Chuck's) but have never used it simply because I don't know how. Chris
  3. vossy
    Well done! I love Columbus's Ships. I am currently doing the Mantua Santa Maria after having already done the Amati Santa Maria. Chris
  4. vossy
    So James, are all hull and deck planks pre-cut and shaped for this kit? Chris
  5. vossy
    Hi Mark, if you do a search for Sergal Bounty 1:60 on this site you will probably find build logs for it. One thing I would say by just looking at your frame there is to install more filler blocks both in the bow and stern area before you start planking. Chris
  6. vossy
    Hi all, I have a very old kit of the Billings Oseberg BB720. Unfortunately it comes with pretty average plastic fittings for the head and stern decorative pieces and also the shields. I have contacted Billings direct in Denmark and can get replacement wooden head and stern pieces. As I live in Australia the cost is somewhat prohibitive (around $90 AUD). The shields I reckon I can make myself from wood, but these pieces present a totally different challenge. I am wondering if anyone has seen these on the market anywhere else. Attached is a picture of the said pieces. Cheers Chris.
  7. vossy
    Looks great David. Happy New Year and have a safe trip. Chris
  8. vossy
    Hi all, does anybody use the sawdust from left over planks mixed with PVA Glue and water to create a very fine filler for very small gaps in hull planking? If so, what mix ratio/consistency do you make your paste? Thanks Chris.
  9. vossy
    Speaking as a "modern" day veteran, 4 continuous hours sleep is a luxury we had during cruising watches. At battle stations etc. you slept for minutes where your station on the ship was. Ships are dangerous places. Chris.
  10. vossy
    Hi Jim. Number 1 rule for me is build a vessel that interests you. Try to stay away from more complex hull types such as Victory, Bounty, Endeavour. ie. anything with a bluff bow. Don't expect the instructions to go from A - Z with no problems in between. Indeed, some manufacturers will only provide somewhat rudimentary instructions, and often not in English. Don't worry if your build doesn't come out looking exactly like the exquisite picture on the box. These are models most likely built by "expert" modellers and photographed by "expert" photographers. Have fun! Chris.
  11. vossy
    Stunning!
  12. vossy
    Whatever color stain you end up applying to the model, the final result will be determined greatly by the original unstained color of the wood you are applying it too. Personally I like a lot of my older vessel to have a darker look. Given that most, if not all, have been planked with walnut strips in various color tones, I find that if i apply 1 or 2 coats of semi gloss walnut stain this enriches the bare wood and gives it a nice darker shade. Stain is expensive, at least where I live, so doing test patches can be prohibitive. Dont just rely on the samples you see in hardware stores and paint shops to determine final color. You dont know what substrate those samples were before they were stained. My guess is that they wont be walnut strips. Plus, I also use water based stain. I think that raising the grain just a little gives a more authentic appearance. Also it saves on cost for clean up of brushes etc. and has less odour. Chris
  13. vossy
    Hi Ray, some fine looking models you have there. You will find many knowledgeable and friendly people here. Hope you also follow the mighty Brisbane Lions like me! Chris.
  14. vossy
    Sorry I could have sworn you did Bounty. Anyway, I have the Mantua 1:50 Santa Maria heavily bashed and just about to get onto the masts. I decided to leave off the over the top metal decorations and brass railings etc. as I thought they looked out of place on such a vessel. Most of the metal parts I have replaced with wooden parts I made from various offcuts. I didn't do a log but will put up pics in the gallery once it is completed. Also pulled out the Amati Bounty that I have that was about half way through some very dodgy first planking. I figure I should be able to rescue it and produce a pretty good piece. Also have to finally put a few masts and basic rigging on the Riverboat to finish her off. Chris.
  15. vossy
    Hi David, she is looking good. I was looking at your completed build list. Did you not do the Amati 1:60 Bounty at some stage? I thought you did a build log on it? Chris.
  16. vossy
    Hi, from what your photo is showing it appears that you are trying to bend the plank against the grain. This is wrong. The planks should lay flat against the first planking layer. To achieve the slight upwards curve on the finished model it is necessary to taper the planks as you go ie. remove small amounts from the top edge of the fore and possibly aft section of each plank. Unless your model is a bluff bowed vessel such as the Victory, Endeavour, Bounty etc. with second layer planking as thin as yours, 0.6mm you probably wont have to use any plank bender on the vessel. But you will have to taper as you go. Chris.
  17. vossy
    I wish you well and look forward to watching you build her. I may get this particular model myself one day. Chris
  18. vossy
    Mark, I totally agree with you that the sails furled/unfurled option is totally a modellers own choice.. Personally I like ships with no sails due to a number of reasons including cost and quality of sails and cloth available, and mostly the fact that they tend to hide many hours of very fiddley rigging work. However a thought occurred that maybe the modelling community could start a trend that was begun by sculptors of soldiers and their horses. In my country, Australia, drive through any town, big or small, and you will see statues of soldiers on their horses, mainly WW1 era. A statue that depicts a soldier on a horse in which the horse has all 4 of its feet on the ground denotes that both rider and horse survived the battle. If the horse has 1 foot off the ground it denotes that the rider was injured in the battle, and if the horse is rearing or has 2 feet off the ground it denotes that the rider was killed in the battle. Anyway, bit of trivia I guess. Chris.
  19. vossy
    Magnificent David!
  20. vossy
    Definitely keep it and try to clean it up a bit. Who cares if it doesn't represent an actual real life vessel. I have numerous models that I have painstakingly made myself that are, to me anyway, good representations of historical vessels, and at least 3 versions of my favorite vessel, Santa Maria, which may, or may not, be good representations of her. No-one really knows as there are no verified pictures of her or Columbus for that matter. Who's to say that your find is not a true representation of an early vessel? Having said all that I also have a small wooden sailboat about 10 inches long that my sister bought for me about 6 years ago. It is a simple model with a solid hull, small square wooden cabin and a single mast and sail. It was carved on a beach in Queensland, Australia by a local craftsman from a single piece of driftwood and is among my favorite models. If you like your find, clean it up, find it a place in your home, and treasure it.
  21. vossy
    This looks awesome David!
  22. vossy
    Thanks. I did the Amati Santa Maria years ago and had awful trouble with this part. Looked like a big lumpy mess on mine, but yours looks really good I reckon. Also I dont know if its just the picture you took, but yours also look like they have been tarred, which I guess might have been the case on the real thing? Anyway, great job.
  23. vossy
    Really nice David. Got any pics where you tie them off at the upper end?
  24. vossy
    Looking awesome David!
  25. vossy
    Looking amazing David. I actually really like models such as the Victory that show some of the gunports closed as well as open. Also once she is finished and fully rigged I doubt anyone will even notice the missing rigging in the gunport lids. Chris

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...