donrobinson

Looks good Jack. The tape on the bulkhead edges is a good idea, this should help with the removal and also a lot less glue clean up

Hello all just a small update, Thanks to all for stopping in, for your likes and great comments.
 I finally got the courage up to cut all the holes in the deck and I must say all went good, and I also finished up my ships wheel.
 Not much to be said the pictures say it all. the cuts were made with a 1 mm end mill bit then finished with a file.
 The very first picture shows the outline for the aft hatch which I spent considerable time measuring, marking and double checking..............even though it was perfectly square and centred I had to erase all of it as this is the bow     . Things got better after this, glad I didn't start to cut. The deck has one coat of poly now on it and will get two or three more
Enjoy
 









 
 
 All deck furniture and masts are just sitting in their places, nothing is permanently fixed yet.
 
Have a Good Evening 

Hello all just a small update, Thanks to all for stopping in, for your likes and great comments.
 I finally got the courage up to cut all the holes in the deck and I must say all went good, and I also finished up my ships wheel.
 Not much to be said the pictures say it all. the cuts were made with a 1 mm end mill bit then finished with a file.
 The very first picture shows the outline for the aft hatch which I spent considerable time measuring, marking and double checking..............even though it was perfectly square and centred I had to erase all of it as this is the bow     . Things got better after this, glad I didn't start to cut. The deck has one coat of poly now on it and will get two or three more
Enjoy
 









 
 
 All deck furniture and masts are just sitting in their places, nothing is permanently fixed yet.
 
Have a Good Evening 

Thanks Ian, the suppers were fun. One has to be careful as the little tabs in between the suppers are very fragile.

Hello all just a small update, Thanks to all for stopping in, for your likes and great comments.
 I finally got the courage up to cut all the holes in the deck and I must say all went good, and I also finished up my ships wheel.
 Not much to be said the pictures say it all. the cuts were made with a 1 mm end mill bit then finished with a file.
 The very first picture shows the outline for the aft hatch which I spent considerable time measuring, marking and double checking..............even though it was perfectly square and centred I had to erase all of it as this is the bow     . Things got better after this, glad I didn't start to cut. The deck has one coat of poly now on it and will get two or three more
Enjoy
 









 
 
 All deck furniture and masts are just sitting in their places, nothing is permanently fixed yet.
 
Have a Good Evening 

Hello all just a small update, Thanks to all for stopping in, for your likes and great comments.
 I finally got the courage up to cut all the holes in the deck and I must say all went good, and I also finished up my ships wheel.
 Not much to be said the pictures say it all. the cuts were made with a 1 mm end mill bit then finished with a file.
 The very first picture shows the outline for the aft hatch which I spent considerable time measuring, marking and double checking..............even though it was perfectly square and centred I had to erase all of it as this is the bow     . Things got better after this, glad I didn't start to cut. The deck has one coat of poly now on it and will get two or three more
Enjoy
 









 
 
 All deck furniture and masts are just sitting in their places, nothing is permanently fixed yet.
 
Have a Good Evening 

Hello all just a small update, Thanks to all for stopping in, for your likes and great comments.
 I finally got the courage up to cut all the holes in the deck and I must say all went good, and I also finished up my ships wheel.
 Not much to be said the pictures say it all. the cuts were made with a 1 mm end mill bit then finished with a file.
 The very first picture shows the outline for the aft hatch which I spent considerable time measuring, marking and double checking..............even though it was perfectly square and centred I had to erase all of it as this is the bow     . Things got better after this, glad I didn't start to cut. The deck has one coat of poly now on it and will get two or three more
Enjoy
 









 
 
 All deck furniture and masts are just sitting in their places, nothing is permanently fixed yet.
 
Have a Good Evening 

Hello all just a small update, Thanks to all for stopping in, for your likes and great comments.
 I finally got the courage up to cut all the holes in the deck and I must say all went good, and I also finished up my ships wheel.
 Not much to be said the pictures say it all. the cuts were made with a 1 mm end mill bit then finished with a file.
 The very first picture shows the outline for the aft hatch which I spent considerable time measuring, marking and double checking..............even though it was perfectly square and centred I had to erase all of it as this is the bow     . Things got better after this, glad I didn't start to cut. The deck has one coat of poly now on it and will get two or three more
Enjoy
 









 
 
 All deck furniture and masts are just sitting in their places, nothing is permanently fixed yet.
 
Have a Good Evening 

Hello all just a small update, Thanks to all for stopping in, for your likes and great comments.
 I finally got the courage up to cut all the holes in the deck and I must say all went good, and I also finished up my ships wheel.
 Not much to be said the pictures say it all. the cuts were made with a 1 mm end mill bit then finished with a file.
 The very first picture shows the outline for the aft hatch which I spent considerable time measuring, marking and double checking..............even though it was perfectly square and centred I had to erase all of it as this is the bow     . Things got better after this, glad I didn't start to cut. The deck has one coat of poly now on it and will get two or three more
Enjoy
 









 
 
 All deck furniture and masts are just sitting in their places, nothing is permanently fixed yet.
 
Have a Good Evening 

Hello all just a small update, Thanks to all for stopping in, for your likes and great comments.
 I finally got the courage up to cut all the holes in the deck and I must say all went good, and I also finished up my ships wheel.
 Not much to be said the pictures say it all. the cuts were made with a 1 mm end mill bit then finished with a file.
 The very first picture shows the outline for the aft hatch which I spent considerable time measuring, marking and double checking..............even though it was perfectly square and centred I had to erase all of it as this is the bow     . Things got better after this, glad I didn't start to cut. The deck has one coat of poly now on it and will get two or three more
Enjoy
 









 
 
 All deck furniture and masts are just sitting in their places, nothing is permanently fixed yet.
 
Have a Good Evening 

Hello all just a small update, Thanks to all for stopping in, for your likes and great comments.
 I finally got the courage up to cut all the holes in the deck and I must say all went good, and I also finished up my ships wheel.
 Not much to be said the pictures say it all. the cuts were made with a 1 mm end mill bit then finished with a file.
 The very first picture shows the outline for the aft hatch which I spent considerable time measuring, marking and double checking..............even though it was perfectly square and centred I had to erase all of it as this is the bow     . Things got better after this, glad I didn't start to cut. The deck has one coat of poly now on it and will get two or three more
Enjoy
 









 
 
 All deck furniture and masts are just sitting in their places, nothing is permanently fixed yet.
 
Have a Good Evening 

Hello all, Thanks for stopping in for a look, for all the likes and the awesome comments. Today(yesterday now) I took a day off building the Trabaccolo(sort of) and took some time to use a few of the tools I had to have but some have never used. So I built a ships wheel, yes I know the Trabaccolo has a tiller but she was a ship of trade and on one of her journeys she picked this one up, hope you enjoy:\
 
First up is the handles, actually this wasn't the first up but at the time when I started I did not think I would be showing any of this. So this is 3 mm walnut dowel, from MarisStella, the knob part is 6mm long for a total length from end to end of 12 mm and just turned on my rotary tool. I used some rifler files to do the shaping.
 

 
 These next couple of pictures are showing the handles in place,this is where I missed taking pictures. I started with a dowel, trued it up on the lathe then mounted the chuck on the rotary table(also mounted to a tilting table) that is attached to the mill. I drilled the 8 edge holes at 1.5 mm using a end mill bit, then laid the table assembly to the horizontal position.  I made the centre hole using a 3 mm end mill bit then moved it over to within 2mm of the outside edge and cut a 3 mm wide groove(rabbit).
 


 
 As you can see the wood was really breaking apart, this was just a piece of an old broom handle, so everything got a coat of thin ca. After glue was dry it was put back on lathe and separated(again no pictures) using the parting tool. Doing it this way solves the problem of getting the hub centred as it is still one piece
 

 
These next two pictures are just turning down some brass for the centre hub (not rocket science but first time for me  ) the piece is about .5 mm thick and 8mm in diameter, I think it could have been  a little smaller but I was trying to cover up the wooden hub.
 

 
And here is the result of my "fun day", it measures 31.5 mm from knob end to knob end. Still needs a light sanding and some wipe on poly, it should look real good in the cargo hold as it only has eight handles instead of the proper ten   .
 

 
 The next "fun day" may see a stand and drum for it

Happy Birthday Frank, I hope you are having a great day and wish you many more          

She looks very nice the colours look real sharp. Any pictures of the deck?

You are awesome.....SANTA

That is real impressive Bob

Happy Birthday Frank, I hope you are having a great day and wish you many more          

You are awesome.....SANTA

Going to be very interesting, will watch for more

Happy Birthday Frank, I hope you are having a great day and wish you many more          

Happy Birthday Frank, I hope you are having a great day and wish you many more          

Happy Birthday Frank, I hope you are having a great day and wish you many more          

You are awesome.....SANTA

Thanks B.E., great of you to stop in

Thanks B.E., great of you to stop in