garyshipwright

Thanks guys. Guy your right about that, have been busy that's for sure. Thanks druxey, thought that might add a little  detail to her. If you look close at the top of the capstan. I installed some pin's and chain's for holding the bar's in place. Still a lot to do on her, just need to spend a lot more time on her. Once I get the beams installed I may just have some fun and install the stove that I built a couple of years ago.   

Hello every one. It's been awhile since I posted any thing on Montague/Alfred but wanted to get the the planking done on the Winchelsea and after 6 month's or so of building the bulkhead's and planking her in boxwood I finally went back to work on Montague/Alfred. Been slowly working on adding more beams to the upper deck. I added a few photo's of the Winchelasea  and do hope you enjoy the photo's. Sorry about the delay on getting back to her. Gary

Hello every one. It's been awhile since I posted any thing on Montague/Alfred but wanted to get the the planking done on the Winchelsea and after 6 month's or so of building the bulkhead's and planking her in boxwood I finally went back to work on Montague/Alfred. Been slowly working on adding more beams to the upper deck. I added a few photo's of the Winchelasea  and do hope you enjoy the photo's. Sorry about the delay on getting back to her. Gary

Hello every one. It's been awhile since I posted any thing on Montague/Alfred but wanted to get the the planking done on the Winchelsea and after 6 month's or so of building the bulkhead's and planking her in boxwood I finally went back to work on Montague/Alfred. Been slowly working on adding more beams to the upper deck. I added a few photo's of the Winchelasea  and do hope you enjoy the photo's. Sorry about the delay on getting back to her. Gary

Hello every one. It's been awhile since I posted any thing on Montague/Alfred but wanted to get the the planking done on the Winchelsea and after 6 month's or so of building the bulkhead's and planking her in boxwood I finally went back to work on Montague/Alfred. Been slowly working on adding more beams to the upper deck. I added a few photo's of the Winchelasea  and do hope you enjoy the photo's. Sorry about the delay on getting back to her. Gary

Hello every one. It's been awhile since I posted any thing on Montague/Alfred but wanted to get the the planking done on the Winchelsea and after 6 month's or so of building the bulkhead's and planking her in boxwood I finally went back to work on Montague/Alfred. Been slowly working on adding more beams to the upper deck. I added a few photo's of the Winchelasea  and do hope you enjoy the photo's. Sorry about the delay on getting back to her. Gary

Hello every one. It's been awhile since I posted any thing on Montague/Alfred but wanted to get the the planking done on the Winchelsea and after 6 month's or so of building the bulkhead's and planking her in boxwood I finally went back to work on Montague/Alfred. Been slowly working on adding more beams to the upper deck. I added a few photo's of the Winchelasea  and do hope you enjoy the photo's. Sorry about the delay on getting back to her. Gary

Hello every one. It's been awhile since I posted any thing on Montague/Alfred but wanted to get the the planking done on the Winchelsea and after 6 month's or so of building the bulkhead's and planking her in boxwood I finally went back to work on Montague/Alfred. Been slowly working on adding more beams to the upper deck. I added a few photo's of the Winchelasea  and do hope you enjoy the photo's. Sorry about the delay on getting back to her. Gary

Hello every one. It's been awhile since I posted any thing on Montague/Alfred but wanted to get the the planking done on the Winchelsea and after 6 month's or so of building the bulkhead's and planking her in boxwood I finally went back to work on Montague/Alfred. Been slowly working on adding more beams to the upper deck. I added a few photo's of the Winchelasea  and do hope you enjoy the photo's. Sorry about the delay on getting back to her. Gary

Hello every one. It's been awhile since I posted any thing on Montague/Alfred but wanted to get the the planking done on the Winchelsea and after 6 month's or so of building the bulkhead's and planking her in boxwood I finally went back to work on Montague/Alfred. Been slowly working on adding more beams to the upper deck. I added a few photo's of the Winchelasea  and do hope you enjoy the photo's. Sorry about the delay on getting back to her. Gary

Hello every one. It's been awhile since I posted any thing on Montague/Alfred but wanted to get the the planking done on the Winchelsea and after 6 month's or so of building the bulkhead's and planking her in boxwood I finally went back to work on Montague/Alfred. Been slowly working on adding more beams to the upper deck. I added a few photo's of the Winchelasea  and do hope you enjoy the photo's. Sorry about the delay on getting back to her. Gary

Hello every one. It's been awhile since I posted any thing on Montague/Alfred but wanted to get the the planking done on the Winchelsea and after 6 month's or so of building the bulkhead's and planking her in boxwood I finally went back to work on Montague/Alfred. Been slowly working on adding more beams to the upper deck. I added a few photo's of the Winchelasea  and do hope you enjoy the photo's. Sorry about the delay on getting back to her. Gary

Hello every one. It's been awhile since I posted any thing on Montague/Alfred but wanted to get the the planking done on the Winchelsea and after 6 month's or so of building the bulkhead's and planking her in boxwood I finally went back to work on Montague/Alfred. Been slowly working on adding more beams to the upper deck. I added a few photo's of the Winchelasea  and do hope you enjoy the photo's. Sorry about the delay on getting back to her. Gary

Hello every one. It's been awhile since I posted any thing on Montague/Alfred but wanted to get the the planking done on the Winchelsea and after 6 month's or so of building the bulkhead's and planking her in boxwood I finally went back to work on Montague/Alfred. Been slowly working on adding more beams to the upper deck. I added a few photo's of the Winchelasea  and do hope you enjoy the photo's. Sorry about the delay on getting back to her. Gary

Hi Alexandru.
Sorry sir and forgive me for stealing your log and after this I will not say another word on this small platform.
Hi Norriro.
To me the biggest question is when did Victory received this little deck and yes sir I do agree that this little platform did show up through out wooden ships. I went looking for some more primary research on this and did find a couple or is it one and some other's that are contempory. I have added 5 photo's showing the changes to Victory's bow and one that shows a first rate with a round bow. There is a picture like this one that is the Victory but I can't seem to find it now which is why I put this one here. The main one showing a model of the Victory's beakhead buckhead after she had her large repair in 1803 prior to the battle of Trafalgar, which is what the NMM web site says about it. If you look you can see the height of the chase ports from the deck. Now if you look at the painting, not sure of its date but looking at the back ground it probably was in the 1920's when she was being refit as she was post to look like in 1805. In this photo you can see that the chase ports are not at the same height as in the first picture which is probably due to the raised small platform. This is the time that I believe they strip away the round bow and tried to give her that 1805 look but the model shows what it really was post to look like in 1805. Her beakhead I don't belive is right if you compare the two. Also I added a painting not sure of the date but shows Victory breaking the French line with the same beakhead bulk head. I do believe as you said because her bow was all shot up, that when she was repaired do believe that is when she got her round bow, just like the older ship in the picture. The model also shows how the upper wale, stop short of the stem and ends under the aft part of the main rail. Could be total wrong sir but does give food for thought, and has been interesting. Thank you.
Gary

Hello Alexandru. I know this has been brought up before but just some food for thought on the beakhead bulkhead raised platform. For me I don't think that Victory or other 90 to 100 gun ships had this platform. My reason are that plans of the Victory as well as others such as the Princess Royal of 1773,Ville de Paris of 1788, don't show this raised platform. My thinking is that the raised platform didn't come about on Victory till after they redid the bow turning it in to a round bow minius the whole beakhead itself. The upper deck went all the way fwd and was even with the main rail of the head work making ever thing on a even keel. There really was't any need for this small raised platform. Once the Victory bow was redone, as she looks today, it show's the beakhead buckhead, along with the  raised platform. Do believe that some of the authors that has been posted,do not show the small platform because plans and other primary reseach doesn't show this. Here are some photo's of the plans I have of Victory going back to her first drawing which came from the Danish NMM. Also one from the English NMM and one out of Bugler book. One thing you will noticed is the primary plan doesn't show the small platform. You will also notice the plan of Victory with all of her carvings also doesn't show this small deck. It's not till you see the plan by Buglar that shows this. This might also explain why the round houses and collums go down two feet more. I have also added a photo of Alfred that does show the raised platform which was a common item on ships of 74 guns. It seems that if they had this raised platform it seems that primary plans would show this. If you look in Rob Napier book Legacy of a Ship model, on page 89, 90,91 and 92 how it shows the upper deck going all the way fwd and no small raised platform. Do hope that this is some food for thought on this small raised deck that raises a lot of question about did she or didn't she. Some food for thought sir.
 
Gary

Good morning.

I got a little further on the case. The base is assembled. Ended up being 42 x 14. White ash with black walnut trim. Acrylic will fit down in the 1/4 x 1/2 groove and be pinned in place with maple dowels. The Pegasus stands will be sunk down 3/8 to lock them in place. 

Hi Johann. Looking outstanding as usually. Have a question for you. You showed in post 2079 your soldering station and was wondering where you got the to  tall clamp looking items in the white board for soldering. I have been looking for a set of these but as of yet have not found them. Keep up the great work and thank you. Gary

Hi Johann. Looking outstanding as usually. Have a question for you. You showed in post 2079 your soldering station and was wondering where you got the to  tall clamp looking items in the white board for soldering. I have been looking for a set of these but as of yet have not found them. Keep up the great work and thank you. Gary

Hi Johann. Looking outstanding as usually. Have a question for you. You showed in post 2079 your soldering station and was wondering where you got the to  tall clamp looking items in the white board for soldering. I have been looking for a set of these but as of yet have not found them. Keep up the great work and thank you. Gary

Nice job Mike. Will be a big help to other's when it comes to building her. Have a question about you square's and was wondering where you got them? They seem to be quite thick which to me would make them very stable when used. Thank you and keep up the good work. Gary

Thanks Mike. 

Nice job Mike. Will be a big help to other's when it comes to building her. Have a question about you square's and was wondering where you got them? They seem to be quite thick which to me would make them very stable when used. Thank you and keep up the good work. Gary

Nice job Mike. Will be a big help to other's when it comes to building her. Have a question about you square's and was wondering where you got them? They seem to be quite thick which to me would make them very stable when used. Thank you and keep up the good work. Gary