Jump to content

Thukydides

NRG Member
 View Profile  See their activity

  • Posts

    1,140

  • Joined

  • Last visited

 Content Type 

Everything posted by Thukydides

  1. Thukydides
    Nice to see you back at it. The guns do look nice.
  2. Thukydides
    It is a thinner used for oil paints, not sure why they would list it as something you need. I think you will find the build logs more useful than those videos. Just make sure you are reading ahead to see what problems they encountered. Take your time and you will do fine. Good luck.
  3. Thukydides
    Ouch, I had a flooded basement last year (though that was due to a major failure of a water heater). Hope the damage is not too bad 😬.
  4. Thukydides
    It really is amazing how much detail you get into such a tiny project. Great job.
  5. Thukydides
    It is looking great! I have never regretted taking too much time with something on alert, but I have certainly regretted taking too little.
  6. Thukydides
    Awesome job. Two years and one month is pretty good time given the scale of the project. You have accomplished a lot in that time. She looks great.
  7. Thukydides
    Great job, I like your design choices. The model is certainly something you can be proud of.
  8. Thukydides
    I am also in favour of sable brushes. I use either W&N series 7 (very expensive) or rafael 8404 (about half the price pretty much just as good). Make sure if you invest in some brush soap. A tub like this will last you many years. If you are going to buy expensive brushes make sure you take care of them. There are lots of videos on youtube to help. I would actually recommend a size slightly larger than 000, what matters is the point and since you don’t have to worry about getting the brush into a tight space, a larger one will hold more paint and not dry out as quickly. That being said try a few sizes and see what works best for you. Acrylic paint is somewhat transparent so when painting a very transparent colour (such as yellow) over a dark colour such as blue you need to build up the layers. Try painting with a brown colour first and then building up to brighter yellows. Good luck
  9. Thukydides
    Log #38: Painting Complete I have finally finished with all the painting. The frieze was a challenge at only around 3.5mm of space, there was not much room to add in detail. As I have progressed I have gotten a better handle on the style, but I could definitely do a better job if I was to start over. Below you can see how what I accomplished compares to the alert painting. I think I largely captured the feel, though as I have discussed in previous logs I did make some changes based upon what I felt would better capture Neptune and Salacia. Though not strictly realistic (a ship this insignificant would likely not have had this much decoration), I do like the look. In a sense I am trying to capture the essence of the ship as envisaged by the designer even if the ship itself likely didn’t look like this. Overall I am glad I went down this road. I have learned a lot about painting and I feel the model is finally starting to come to life.
  10. Thukydides
    You could try filling the gap with milliput or greenstuff. You would need to paint the cannon after doing so, but looking at that gap it shouldn't be hard to fix with a bit of putty.
  11. Thukydides
    Time for another minor update. The frieze is almost done. Just one more section to paint (on each side) and the little bit by the catheads.
  12. Thukydides
    Thank you, it is the only part of this whole endeavor that I didn't have to learn all the skills from scratch . The hardest part of shading and highlighting is just understanding how the light falls on something. Some people have a natural eye and it comes easy to them. For others (like me) take lots of practice and looking at pictures. At the moment my biggest problem is I only have a few nights a week available for hobby time and I can't both paint mini as work on Alert... Thanks. Just to be clear (as I am not sure if you mean I was suggesting painting it off the model) I was just referring to the point before all the moldings started obstructing my access. Around this point:
  13. Thukydides
    Thanks to everyone for all the likes and encouragement. One week later I am still picking away at the frieze. Below you can see my progress so far. To try and help with consistency I have been doing each section on both sides of the ship before moving onto the next one. The tiny scale is particularly problematic for these flowery flowing shapes as you can’t use some of the tricks I used with the transom and counter to fudge things as it is all thin lines. My thumb is included for scale. Because of this I ended up painting over in blue a number of attempts that weren’t good enough. I do feel that I could have done a better job if I had done this before attaching the railing and the moulding, but that is what this project is about, pushing myself to try and learn skills and gain experience of what not to do for next time :).
  14. Thukydides
    As always neat work.
  15. Thukydides
    Looks fantastic BE. Really you are flying through this build. I am looking forward to seeing how using the boxwood as the yellow stripe turns out once you have everything sanded and painted.
  16. Thukydides
    I continue to pick away at the frieze on the side of alert. The sections below were a bit more tangly to do as I had already installed the channels and the deadeyes. I had to break out the magnifying glasses as I only have about 3.5mm of width to work with.
  17. Thukydides
    Great progress. Just a minor comment. It appears to me that you are missing one of the hinges (the very top one) on the rudder. There should be one in that indent right where the rudder enters the counter. Also it is hard to tell from the photo but it looks like they might be upsidedown and not in far enough (though I may be mistaken on this as the resolution on the photo is too low to be sure). See below for a close up picture of my alerts rudder.
  18. Thukydides
    Chris has some great kits for beginners. I suspect alert would actually be easier than the lady nelson due to the higher quality materials in it. I believe he also has another cutter he is releasing soon which looks like a great starter kit. Then finally he has a whole bunch of fishing boats if you are looking for something smaller.
  19. Thukydides
    @allanyed I am not sure I understand what you mean by first vs second squadron. Can you elaborate? Also how do you print on silkspan, do you attach it to another piece of paper? By triple printing one side you mean you would only use a single layer of silkspan for the flag?
  20. Thukydides
    How do you get that nice wood texture on the card? Did you mention it in a previous post? In any case it is looking good.
  21. Thukydides
    Congrats, it looks great.
  22. Thukydides
    That is pretty frequent. If you go look at the forum section for new members there is a post discussing the significant number of people who start a build log and never get the model finished. That is why starting with something small (as you have done), is a good idea. I think even in my relatively short time here I have seen a number of build logs I was following just stop posting. Life happens or people just loose interest. I myself had a period of several months where I made no progress on Alert due to a combination of life being busy and being unsure how to proceed with a problem I had with the model. This lead to me feeling unmotivated to work on it and it took some effort to push through that. You will likely have a similar moment and the key is to find little tasks on the model you can get done. I find that having progress to share helps me to want to do more.
  23. Thukydides
    Enjoy, there are a lot of good logs on the lady nelson which will help you on your way.
  24. Thukydides
    Nice, which one? Cutters are a great first model. Take it slow and read as many build logs as you can. It is always better to learn from others mistakes 😃.
  25. Thukydides
    Time for another work in progress picture. I have been slowly working on Salacia (the wife of Neptune). After a few test versions, mostly to try and plot out the layout, I dived in. One thing I have found is that it helps to have a lot of reference photos of the subject. These come in two types: 1) On model pictures (such as the Marshall painting) for getting down the colour and style: https://collection.sciencemuseumgroup.org.uk/objects/co521412/cutter-alert-oil-painting 2) The subject depicted in other artwork to help with context: https://en.m.wikipedia.org/wiki/Salacia#/media/File%3AAffreschi_romani_-_nettuno_anfitrine_-_pompei.JPG https://www.encirclephotos.com/wp-content/uploads/Belgium-Antwerp-Salacia-Goddess-Statue-954x1440.jpg This is my progress to date: I feel much better about the cloth on her than I do about Neptune. I plan to depict her holding the stick wth the leaves as she is portrayed in the statue I referenced above. I think this will add balance and contrast where they are both mirroring each other holding an object, but the objects better represent who they are. EDIT: And i got the counter done. I also adjusted neptune a little. Next on to the sides.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...