Jump to content
NRG Photographic Model Ship Competition - All eligible to enter - Reduced memberhsip fee - JULY 31 ENTRY DEADLINE ×

DocRob

Members
 View Profile  See their activity

  • Posts

    1,149

  • Joined

  • Last visited

 Content Type 

Everything posted by DocRob

  1. DocRob
    Phew, almost there. Some touchups are still to do and there are still some parts missing, like the anchors, which I forgot. I added all the railings, which proved easier than thought. I bent them to shape before carefully set them on a wooden board with double sided adhesive tape and then primed and sprayed the railings. Before installing the outer railings, I glued on the masts, cranes and superstructure, not to interfere with later. Lots of figures were added and I hope, they tell little stories with their poses, interaction and placement. Lastly, there is the question, if I rig the Arizona. I'm not so sure, if rigging would be visible in this scale, but this decision will be made later. It seems like I can think about new projects. There were times, where I couldn't think of getting to this stage, during the build and this feels good and satisfactory. Cheers Rob
  2. DocRob
    Thanks for continuously finding hairs in my USS Arizona soup, ddp . Checking the pictures, it seems you are right. I initially wanted to place the guns like you mentioned, but now they are glued in place like they are. Not the most accurate Arizona build around, I fear, but I can live with that. Cheers Rob
  3. DocRob
    I added more and more sub assemblies to the mix. After a bit of detail painting with a brush, the numerous boats were glued to the decks, later followed by the gangways. More figures were CA-ed to their stations. The superstructure and the mast section are not glued in place yet, as I will add some railings first. Not shown on the pictures are the anchor chains, which I blackened in burnishing fluid. Cheers Rob
  4. DocRob
    It's a bit of cash in time now, as it's the time of the build, where all the pre fabricated sub assemblies got finally detailed and added to the decks. I mounted the planes on their sleds onto the catapults, dozens of bollards, winches, AA guns and mid artillery with their gun shields. Not all is glued yet, and I try to assemble in a logical order, without risking to destroy glued on details through bad sequencing. Suddenly the whole build appears to melt together with these very rewarding steps. Cheers Rob
  5. DocRob
    You made your decision Bill and I think it's a good one. Answering the initial question of your thread, I can only add a personal view, as my experience in wooden ship and plastic ship builds are limited. I'm an experienced modeler though, but ships weren't on my past schedule. Last year I took all my courage and started my first serious attempt in wooden ship modeling, I built the Duchess of Kingston from Vanguard models. I never limit my modelling urges, but I always need a trigger or a point of fascination to start a project, in this case the biography of the name giving dame. When this initial spark is ignited, I will loose myself in a project, no matter what. The DoK was way above my skill level, but it is a well designed and with the help of the forum members, I almost sprinted through the build, which is finished sans the rigging. I had more fun learning and building and working with wood instead of plastic. It was so very exciting, that I bought another Vanguard kit, which is very helpful with a very clever design, good materials and exceptional step by step manual. This year, I started on the other side of the medal, building a 1/350 scale USS Arizona and it was a love and hate build until now. The plastic of the base kit is so bad, that luckily nearly all the weaknesses of the kit are substituted by countless photo etched parts and 3D-printed ones. I had difficulties to get into a building groove, like with the wooden sailing boat, but I will finish USS Arizona soon and besides some letdowns, most of the build is tedious but satisfactory, too. Interestingly it took me four month to build the Duchess of Kingston (without rigging) and the USS Arizona will take about the same time. Like I did before, I will build models from plastic, wood, resin and maybe metal like before, but it will be generally more biased to ship modeling. Personally, I easily get bored, therefore, I always seek new challenges in modeling. I guess with your background in modeling and woodworking skills, you will easily achieve good results with a decent wooden ship kit. The rest is determination and working always to your standards and like others already mentioned, have fun. Cheers Rob
  6. DocRob
    Phew, I painted up the figures. The printing quality is excellent for the scale and these little guys will bring some life onto the decks of USS Arizona. The figures were primed matte white with the airbrush and then followed by skin color, light blue and blue gray, brown for the shoes and some other details, applied with a 000 brush. Last, I brushed on a mix of grey oil paint and matte thinner as a wash, to let the detail pop a bit more. And here there are the first officers and sailors on duty (or resting). Cheers Rob
  7. DocRob
    I always use a good respirator mask, when airbrushing and cleaning the equipment. I use my airbrush frequently and I can remember my airbrush beginnings, when I sprayed acrylics in my room. If I lifted a cup afterwards, there was a non soiled spot, I definitely don't want to have that in my lungs, along with aggressive and poisonous chemicals. My health is too important to me than to have that tiny bit of more comfort. I wear the mask, even as I have a spray booth, which minimizes the spray particles. I also wear a mask, when I sand or saw resin parts, as the dust particles are carcinogenic. Well with wood sanding it depends on the amount and the sanding place. When I sand a planked hull outside, I might skip the mask, but mostly, I wear one. If the question is, do you need a mask for different modelling tasks, my answer would be definitely yes, it's a 35€ investment into your future. I got this one and different sets for filters (dust / paint) Dräger X-plore® 3300/3500 | Draeger Cheers Rob
  8. DocRob
    It looks like I've done nothing, but that's not true, did many little things, indeed very little things. I folded lots of boxes and hatches from PE along with ladders, which are time consuming, because I bent all the single steps with a sharp blade and a very fine pair of tweezers. There are more boats with racks and a big range of other tiny PE assemblies, some shown here. All these are now painted up and ready to install. Next were the Kingfishers, which received a two tone camo. The planes were primed light grey and then all undersides where covered with liquid mask, brushed on and then sprayed with the top color mix of light blue grey. I thought about how to paint the windows and tried black panel wash and liked it, as it pronounced the framing and dries glossy for contrast. Now they are up for decaling. Before I install all the larger subassemblies to the decks, I will apply the figures, which is easier due to better accessibility. These figures from Ion Models are really tiny and it took a while, to cut them off the print sprues. Luckily only one leg was lost, the print material has a bit of flexibility and is not too brittle. I grouped the 74 sailors onto double sided adhesive tape for painting and prime them white with the airbrush and continue with brush accentuation . Cheers Rob
  9. DocRob
    Thanks again ddp, I corrected the catapults angle and the housing will be, where it belongs. Cheers Rob
  10. DocRob
    These are great drawings and photos ddp, thank you for that. You are right about the angled catapult, I somehow missed it in the manual and I have to see, what I can do about it. The proposed quad gun tubs are raised, but somehow, it doesn't show on the picture. I've read, that the tubs were readily installed, but there were no guns mounted, when USS Arizona was attacked. The 'thing' you mentioned, is only there for a condensed view in the picture. It belongs behind the single mast of the main mast structure, between the boats. Cheers Rob
  11. DocRob
    Slowly pacing through the on deck applications. This build is testing my patience a lot and the last nagging bit are the gun shields for the middle artillery. They are made by PE and the enforcing struts, tiny triangles needed to be bent in place. I dreaded this part of the build, because the first shield, I tested, lost a lot of the tiny struts through breaking. The others, I annealed had less broken parts, but still some. Some of the sensible struts were too long and had to be shortened with unshivering hands. Nothing is glued, because the parts will be airbrushed off the deck. You will notice, that I left the cut out deck segments in place, which would have to be removed for the original plastic. Leaving them, will look more convincing, I hope. Cheers Rob
  12. DocRob
    That's an interesting project ddp, converting these kit dinosaurs with a lot of scratch work. No wonder, you are familiar with the details and drawings. For me USS Arizona is only a short stint into small scale ship modeling, as I do all kinds of modeling and like to continue with my wooden Duchess of Kingstons rigging and some other plastic kit projects. Cheers Rob
  13. DocRob
    Somehow, I missed your build RGL. I really like what you've done to that dinosaur kit. Extra detailing and great painting skills show on that positively quirky airframe. Cheers Rob
  14. DocRob
    After the rust oil weathering had dried, I started the next layer, salt residues made with a white naval wash from AK. I applied it on the sides of the hull and only a little in the bow area, which then was blended with white spirit. Next were the shafts and propellers, which were rubbed with AK's old bronze wax, a perfect fitting tone. The shaft got Uschi van der Rosten's iron pigments rubbed in. Alignment is a little bit off, but I decided to let that be. On to the wooden decks, which are self adhering. All fitted well, except the delicate bow section, where the wood material was not cut thoroughly, which led to some free handed cutting, with a half glued deck. Despite this, fit was exceptional, with the exception, where PE parts substituted plastic, so no fault by Artwox. Most of the on deck assemblies will be added now, after the deck application, exactly for this reason. On some spare deck material, I tried a varnish first, but decided against it, as I didn't like the looks. If I weather the decks, it will be done later, with pigments, I guess. Cheers Rob
  15. DocRob
    Thank you ddp, that is some great material. I'm absolutely no specialist on the USS Arizona and I'm well aware of some of the shortcomings of the kit. I don't want to correct all mistakes, as this is my first 1/350 ship build and I'm about to learn the needed skills. I read about the bilge keels before and this is not the only strange area of the hull. For the guns, you are correct, about the non existent overhang, but when I look at pictures from the late USS Arizona, the gun port openings seem to have flat bottoms. Maybe there was some change over time and the drawing doesn't say, it's an USS Arizona turret shown. Cheers Rob
  16. DocRob
    I've been busy over the last days with the USS Arizona. I decided to weather a bit, because no ship ever looks clean and because I wanted to learn weathering on ships. But first to the decals. Luckily there are not many and that's definitely a pro for ship modeling. These here are the new incarnation of Eduard decals which have to be cut out, because the carrier film is not. After application, they looked like this with silvering and reflecting carrier film. Eduard claims, the carrier film of these newer decals can be removed, leaving an almost painted on result. Hmm, sounds good, but after peeling off the carrier film very carefully all the decals had stencil lifts .. My underlayer maybe was not perfect, but it was not too shabby either with a coat of gloss GX100 from Mr. Color. Before I try these again on a larger scale, I would test on some mules. With the carrier film on, they look worse than other decals, quo vadis Eduard? Next I prepared some of the tiny printed parts for painting, like AA-guns and searchlights, which will be added to the superstructures after the weathering stage. Like I said above, I gloss coated the model, to have a good base for weathering for which I used Tamiya panel liners, but mainly brown oil colors for the first step. My technique is to apply oils liberally and not to scarce with a larger synthetic brush. Different areas were treated with different mixing ratios of oil color and matte finish whit spirit. After a short period of drying, I spread the colors again with help of a bit of thinner and try to work in the direction of the flow, hull downwards and reduce the amount of oil color accordingly. This time, I used the oil color from one of AK's oil pens, and these oil are of a lesser quality, than my normally used from Abt 502. This is where I am now, albeit after taking the photos, I knocked back the effect a bit more, a true benefit of oil rendered weathering. Cheers Rob
  17. DocRob
    After the grey primer, it was time to put some colors onto the Arizona. I started with the stripe around the hull. The hull got a wide spray of flat black around, then I took the measurements from the side view and marked 1mm under the lower border of the strip with my waterline marker tool. I used 3mm Kabuki tape, parallel to the pencil mark for masking the strip. Afterwards the underwater ship was airbrushed with a mix of about 70% of Tamiya XF7 flat red and the rest with Tamiya XF9 hull red. There is a bit of modulation in the color to break the monotony of this large area. The underwater ship was masked then, along the top of three gun turrets, which were beforehand painted flat red on the tops for divisional markings. I read a lot about the coloring above the waterline and concluded with nothing is 100% certain about the hue. I decided to go with a very blue version of grey and looked through my stores, as I didn't want to mix the color, because, I will need it over a longer period of detail painting and corrections. My firs intention was to use Real Colors Intermediate blue, but than I found a jar of Tamiya's XF18 medium blue and liked it a lot. It was exactly the shade of blugrey, I was looking for. After this application, I went to the upper superstructure, which many claim to have been white, others say light grey. I went with Real Colors Insignia White, but masking the areas off was tedious. I used Panzer Putty, which took away a railing or two and de-tacked Kabuki tape. After peeling off the masks, The main components put together looked like this. Now it's time for the wooden decks, but before, I have to decide, If I apply a clear coat and some weathering. I have the tendency to do so, but let's see. Cheers Rob
  18. DocRob
    Thank you Edward, the priming indeed changed the appearance a lot. No more fancy shining, only man o' war serious grey. The color scheme will be a little bit more interesting with blue grey, the contrasting red underwatership and divisional markings on the turrets and last but not least, the wooden deck. I use airbrushes since decades, so drips are none of my problems. One of the biggest factors for successful airbrushing is to have the perfect thinning ratio for the purpose along the correspondent fitting air pressure. In this case, I thinned the primer down to a very thin mix and raised the air pressure a bit to have the paint particles distributed better into the nooks and crannies. You can't work with a high throughput of primer and to get the primer everywhere, I move the part permanently in random patterns, which allows the primed areas to dry rapidly. It's always berst to apply at least two coats, checking the coverage in between. Mr. Surfacer primer is very forgiving, the way it settles and cures and is a perfect match with levelling thinner. Cheers Rob
  19. DocRob
    Prim (er) Time - I used Mr. Surfacer 1200 for the job and used a bit more pressure than usual for the superstructures, to get the primer in the tiniest hidden spots. Next will be painting the hull, but before, I mark the waterline with my waterline tool, easy, because the bottom of the hull is completely flat. Cheers Rob
  20. DocRob
    Thank you S-boat, this build was only a substitution for a S-boat build on another forum (LSM), where there is a maritime group build taking place. I lost all the PE and brass parts from my S-38 kit, so the USS Arizona had to jump in and as it is my first small scale ship build, it is demanding, to say the least. I hope, I can continue with priming and painting soon, as I need a break from fiddly PE assemblies. Cheers Rob
  21. DocRob
    Today in the morning, I fired up my trusted old compressor with the intent to prime all that glaring PE along the few plastic remains with some Mr. Surfacer. Inspecting the manual showed me that there are several parts better to add now, than later, as I initially intended, like railings on the superstructure and some ladders here and there and parts, where I believed, they had to be glued to the deck, instead they are to glue to the superstructure. Railings are especially painful and the rounded shaped are the worst. I think the superstructures are finished now, except tiny antennas, AA-guns, searchlights and water pumps, which will be added after painting. Last for today, were eight of these guns sitting on top of the deck. They are 3D printed and have brass barrels and are superbly detailed. The manual suggests to cut away the railings and substitute them with PE, but I think they look good as they are and handle safer. Cheers Rob
  22. DocRob
    Thanks Kevin and the painting stage is close now and I'm looking forward to relax my stressed eyeballs a bit during priming and painting. Cheers Rob
  23. DocRob
    Simulating woodgrain with oil colors is a great and not too hard to learn technique. I use a workflow similar to the second video in plastic modelling, for WWI airplane interiors and exteriors and other stuff. Like Allan mentioned, I wouldn't use it with a wooden kit, as the grain or wood texture looks a bit overscale at let's say 1/64 or similar. My only application with wood modeling was painting a resin anchor winch in the same hue, than the surrounding wood. Cheers Rob
  24. DocRob
    Thanks for showing Yves, I have this one on my radar, since I saw the first pictures. I will build it along with the gun crew figure set. I would have preferred the loading setting, but the other make for an open sea dio with acrylic water, forming a wave to integrate the whole deck part into the water, not possible wit the loading figure set. Cheers Rob
  25. DocRob
    You are to friendly, thanks Paul, but the little misalignments, deformations, misplacements, etc. sum up little by little and that's not my style in modelling. I'm not a rivet counter, but I like my builds to be build clean and tidy, only to weather some heavily later . I like precision and detest shortcuts, but this build is starting to wear me down. I considered soldering, but only for a moment. There are too many parts, which needed to be glued with CA, like many of the railings, only glued on by tiny dots of CA and too fine to solder. There is even some plastic left, near the parts, which were best soldered. I did solder PE and self fabricated brass parts on other builds and now the technique well, but with this build, it would have been a wrong approach to my eye. Cheers Rob

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...