Kevin
-
Posts
6,825 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by Kevin
-
i use nails all the time and then remove them after the glue has set, the only char removed so far has been for fairing of the hull -
they are in now, about an hour ago, thank you for keeping me in check
-
stunning build, love it, may i ask what colour red are you using,
-
Thank you James
-
ty glenn, it did take me a good few hours to get them right, and only then after cutting back the first two under the template and re faing the stern
-
good evening everyonr thank you for comments and likes day 16 1st planking port and stbd side templates fitted stern tuck, caused me some aggro fot a couple of hours, so the fixed planks were cut back and the stern was re faired allowing the 3rd plank to twist and turn
-
Good evening everyone thank you for comments and likes Day 14 port side Gun port templates fitted well i never expected to be at this stage after 2 weeks, but here i am, and loving it, and i have not had any issues to criticize the build, or instructions, after the hull fairing i test fitted the gun port templets, no other sanding was required the bottom of fwd template forms where the first run of planking under it goes, so a pencil line is drawn, the rest of the plank aligns along the top of the port sill , at this point the template can be removed first plank 2nd plank the after template fits on the top of the 1st plank and lined up with the top right corner of the last gunport, instructions need to be read to be aware of where the glue is applied, as a section of the framework has to be removed at a later date a templete fits between and the area over the ports is covered, using limewood rough opening of the gun ports when the glue has dried
-
ooops on the door way, im sure a couple others things are still needing attention, and when i got back in i found that i had forgotten to put the bracing beams inn thats how strong this build is
-
good evening every one thank you for comments and likes day 13 hull faired the weather here has been pants recently, with snow and rain, so i have been doing some smaller projects on the build, but i will post photos later on in the build as I would like to keep this log in some sort of order, (never achieved that before) the deck has been sanded and varnished with a water based varnish @50/50 to day a few days delay the hull went outside to be sanded, brilliant, oh thats getting hot fizzle bang me mouse blew up anyway an trip to Wickes (other palm sanding tool outlets are available0 this is what i have now
-
ty but my skill levels are not to the standard to achieve the results i would like
- 312 replies
-
- 1
-
-
- enterprise
- caf
- (and 1 more)
-
stunning work
-
i tend to post quite often looking forward to yours along with others, will be nice to see more indy's than Victory's in build
-
thank you James, much appreciated
-
the pattern was a great help, for the placement of the butts, i never tapered the planks, so it did run off, im happy with the result however
-
good evening everyone thank you for comments and likes day 10 lower deck planking complete let the sanding begin
-
Good evening everyone thank you for comments and likes day 9 lower deck planking the weather outside has restricted me taking her out to start sanding the outer hull, so using the boxwood i have started the lower gundeck, sorry the photos are not brilliant, very little of this will ever bee seen, all the slots down the port and stbd side are for the cannons, i made the decision to cover these for now and either find them later on, or find an alternative method for fixing them just loving this build
-
id perfer to be the Lewis, but im not in a race lol, however this does go together so very well, it will of course slow down soon, with planking
Our Emblem ®
