Jump to content

Recommended Posts

Posted (edited)

Looking for a source for either shipyard or nautical (19th to early 20th century) figures.  My model is 1" = 32" scale = figures would ideally be between 2" & 2.25" in height.  Any idea where I can find some?

 

Many thanks!

Edited by trippwj

Wayne

Neither should a ship rely on one small anchor, nor should life rest on a single hope.
Epictetus

Posted

Thanks, Andy - will give that a try.  Those are about 1:29 scale give or take?

Wayne

Neither should a ship rely on one small anchor, nor should life rest on a single hope.
Epictetus

Posted

Remember "Back in the day" before fast food and national heath programs we where on average shorter and thiner than we are today, so a slightly smaller stance might actually be more to SCALE than the model requires.

Andy

Current Build

HM Granado CC

Past builds

 HMS Chatham CC, HM Convulsion CC,  Duke William German Kit, Fair American LSS, The Wright Flyer MS

Posted

I searched quite a bit when building my Emma C. Berry.  Tough to find, but I bought a set of "workers" from some rail road site...info lost when the log disapeared with the MSW server crash.  You want a Guage One figure but if you find 1:35 that would be better.  People were smaller 150 years ago.  I have several figures left over.  Send me a PM and I'll send pics.  I'll give you any one you want.

Maury

Posted

Harvey & Kevin - Thanks!  Will do some digging there.

 

Fenous - you are more than welcome to apply for any open positions, though the accomodations may be a tad cramped for you... ;)

 

Andy Taylor - appreciate that - you are in my old stomping grounds there!  Went to College at Roger Williams (back in the "good old days" when it was a much smaller college!)

 

Maury - will send you a message, and THANKS!!!

Wayne

Neither should a ship rely on one small anchor, nor should life rest on a single hope.
Epictetus

Posted

When I saw this thread name, I thought I would volunteer, but now I know it`s real purpose :-)

 

I thought the same thing.  Turn's out we're a little tall for the job.  

Posted

When I saw this thread name, I thought I would volunteer, but now I know it`s real purpose :-)

'You can fool some of the people some of the time...' :huh:

Kester

 

Current builds: Sherbourne (Caldercraft) scale – 1/64th;

 

Statsraad Lehmkuhl (half model) 1/8th" – 1'.

 

Victory Bow Section (Panart/Mantua) scale – 1/78th  (on hold).

 

Previous build: Bluenose ll (Billings) scale – 1/100th.

Posted

Speaking of figures....Kester, you didn't happen to keep any of that great story about the demise of the Royal Caroline's Captain, did you?

 

Andy

Quando Omni Flunkus, Moritati


Current Build:

USF Confederacy

 

 

Posted

That lengthy community tale of mystery and suspense (with the occassional dry pun thrown in for good measure) was among the most entertaining stories I have seen in many a year.  Would love to see it resurected (the story, not the Captain, that is)

Wayne

Neither should a ship rely on one small anchor, nor should life rest on a single hope.
Epictetus

Posted

Oh yes.... That was the intent of my query :)

 

I recall the enjoyment and laughs that everyone had with it, and although nothing was done at the time, it would be great for it to become a permanent part of MSW.

 

Andy

Quando Omni Flunkus, Moritati


Current Build:

USF Confederacy

 

 

Posted

Well, ok – or at least I think so. I've just been having a look around my files and find that for some weird reason I seem to have kept some of it, but not all! :( However, all is not lost (well actually, some of it seems to be) as I have it printed out and can probably resurrect the missing parts again – given a few cups of coffee and infinite will power, deep into the night. You'll have to bear with me. 

 

Actually, perhaps we should first ask Admin and the Mods what they think of the idea of me taking up screeds of the site capacity?  :o If they agree then fair enough. On thinking more about this, perhaps there might be a dedicated thread for such offerings from members, if they feel so inclined, perhaps to include short stories, articles, or even poems about the sea, rather than put in on the General Discussion thread. Would this be a good suggestion?  

 

In the meantime, I would be interested in the number of those who want to read my story again. :D

Kester

 

Current builds: Sherbourne (Caldercraft) scale – 1/64th;

 

Statsraad Lehmkuhl (half model) 1/8th" – 1'.

 

Victory Bow Section (Panart/Mantua) scale – 1/78th  (on hold).

 

Previous build: Bluenose ll (Billings) scale – 1/100th.

Posted

Kester,

I am one of your fans here!  :piratetongueor4:  Indeed, there seems to be no dedicated forum area... maybe something to ask in the site pb/suggestion area? Well, we wait for your stories in the General discussion anyway...

Padeen (Adeline)

"When there is a will, there is a way"

Completed build: Le Camaret - Constructo - static wood 1:35  (build log, gallery)

Current build (very limited modelling time at the moment...): HMS Fly - Amati/Victory Models - static wood 1:64 (build log)

Projected build: HMS Victory - Chris Watton's design - static wood 1:64 (when available..., no rush!)

Posted

Kester - what are you waiting for?  Your public awaits!

 

Bob

Current build -- MS Bluenose

Future build - MS Flying Fish

 

"A ship is safe in harbor, but that's not what ships are for." - William G. T. Shedd

Posted

The request has been made!

Wayne

Neither should a ship rely on one small anchor, nor should life rest on a single hope.
Epictetus

Posted

I left my opinion on the other thread, I think it has merit..... And should be given a place of distinction around here (the story, not my opinion :P)

 

Andy

Quando Omni Flunkus, Moritati


Current Build:

USF Confederacy

 

 

Posted

can we have a different story please

 

- pretty please

Posted

Kevin,

 

Whoa! Perhaps we should just get this one out of the way first, since there would appear to be some demand – then I might think about it. :huh:

Kester

 

Current builds: Sherbourne (Caldercraft) scale – 1/64th;

 

Statsraad Lehmkuhl (half model) 1/8th" – 1'.

 

Victory Bow Section (Panart/Mantua) scale – 1/78th  (on hold).

 

Previous build: Bluenose ll (Billings) scale – 1/100th.

Posted

There are litterarly thousands of 54 mm or 1:32 scale figurines in either white metal or plastic (hard or soft) on the market. One has to look a bit around other fora for this. They come in whole figures or also as separate arms, bodies, heads etc. Some imaginative surgery will be needed probably. The Tamiya plastic soldiers are 1:35 scale and visibly smaller and more delicate than the 1:32 scale figures and in comparison there is a much smaller range. The 54 mm scale market covers all ages and subjects.

 

The G-gauge has a scale of 1:22.5 BTW. I have never heard of any 1:29 scale.

 

wefalck

wefalck

 

panta rhei - Everything is in flux

 

 

M-et-M-72.jpg  Banner-AKHS-72.jpg  Banner-AAMM-72.jpg  ImagoOrbis-72.jpg
Posted

Wefalk, there really is no true "G" Scale, not like O, OO or HO Etc. There are actually many scales that use the same #1 Gauge track. The reason you may not have heard of 1:29 is that it is a scale put out by an American company USA Trains, and may not be common in Europe.

 

Andy

Quando Omni Flunkus, Moritati


Current Build:

USF Confederacy

 

 

Posted

Preiser make a set of 6 figures in parts that can be animated in all sorts of ways. They are produced in 1/24th and 1/32nd scale. They are excellent figures that are nude so you need to sculpt clothes onto them but thats better than having to scrape the clothes off them! I use them quite a lot for whaleboat crews etc., the downside is they are quite expensive.

 

Google unpainted Preiser nude figures and you should find a few sources. 

Posted

I gave up on purchasing figures a while back.The Adam ones would have done the trick but I'm really not a good painter. I wanted them to illustrate certain boat building tasks and also some crewmen working. So I just did the attached. Simplistic but portrays the information as to how things were done. In this case drilling holes in dead-eyes. These are 1/24 scale.

Ed

post-112-0-93272000-1363101463.jpg

Posted

Does anyone know of a source of US Navy figures 1/48 scale?

 

Thanks,

Tim

Tim 

 

Current Build:

 

 

 

 

 

Future Build:

  • BlueJacket - USS Kidd (Fletcher Class Destroyer) Solid Hull
  • BlueJacket - U.S.S. SAMUEL B. ROBERTS, DE413 | Butler-Class Destroyer Escort
  • BlueJacket - 310' Destroyer "The famous "four-piper" of both World Wars"
  • Model Shipways - Pride of Baltimore II (Topsail Schooner) 
  • Model Shipways - Willie L. Bennett (Chesapeake Bay Skipjack)
  • Constructo - Pilar (Ernest Hemingway's Fishing Yacht)  
  • Sergal - Race Horse (Bomb Ketch)
  • Classic Warships - USS Salem CA-139 (Heavy Cruiser) Resin Kit
  • Pen Duick Schooner - Half Hull (Scratch Build)
  • CSA Submarine Hunley (Resin Kit)
  • Classic Warships - USS Washington BB-56 (Battleship) Resin Kit
  • Blue Ridge Models - USS Alaska CB-1 (Resin Kit)

 

Completed Builds:

                 

Member:

Hampton Roads Ship Model Society

 

              

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   1 member

×
×
  • Create New...