svein erik Posted March 30, 2019 Share #1 Posted March 30, 2019 Hi am starting with chuck's cheerful, the boxwood version I wil use chuck's yellow cedar for this prodjekt and also use chuck spilling metod with lining off hull. am working on the frames and at this time is dry fittet. started also with the boxwood keel parts Svein.erik paulsutcliffe, MEDDO, GrandpaPhil and 5 others 8 Quote Link to comment Share on other sites More sharing options...
MEDDO Posted March 31, 2019 Share #2 Posted March 31, 2019 Always great to see another Cheerful. Will be following along as this is in my queue as soon as work let’s up a bit. Quote Michael Shipwrights of Ohio Current Build: ... Completed Builds: Queen Anne Barge - Syren, Pinnace - MS, Halifax 1768 - LSS, Murrelet - Pygmy, Swift 1805 - AL Link to comment Share on other sites More sharing options...
Chuck Posted July 11, 2019 Share #3 Posted July 11, 2019 How goes the progress....looking forward to seeing you build the model. Remember to ask me any questions. Chuck mtaylor 1 Quote Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
svein erik Posted July 11, 2019 Author Share #4 Posted July 11, 2019 2 hours ago, Chuck said: How goes the progress....looking forward to seeing you build the model. Remember to ask me any questions. Chuck hi chuck well i havent had the time to build more at this time , am working on the syren😲 and a little on the frame on the scratch build USCG Pequot, so after summer i wil start fairing the hull and go from there, wi have a sick child so am trying to get some building time in between! but thanks for chekking inn😊 and yes i wil have questions when i start fully svein.erik Quote Link to comment Share on other sites More sharing options...
Chuck Posted July 11, 2019 Share #5 Posted July 11, 2019 Sorry to hear that....I hope for a speedy recovery!!! mtaylor 1 Quote Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
svein erik Posted July 12, 2019 Author Share #6 Posted July 12, 2019 18 hours ago, Chuck said: Sorry to hear that....I hope for a speedy recovery!!! thanks chuck, its going to be slow recovery.... it started 4 years ago and its going to be more years to come! butt back to the building 😊 am now ready to fearing the hull and is there something i need to know before i start? and i need some wood chuck😲 😉 svein erik mtaylor, GrandpaPhil, druxey and 5 others 8 Quote Link to comment Share on other sites More sharing options...
svein erik Posted July 12, 2019 Author Share #7 Posted July 12, 2019 hi , tanks for likes! this is the start of fairing the hull , it needs more and more and... sandig svein erik Ryland Craze, Chuck, mtaylor and 2 others 5 Quote Link to comment Share on other sites More sharing options...
svein erik Posted July 13, 2019 Author Share #8 Posted July 13, 2019 thanks for the likes, more fairing( port side) and its beginning to look a hull , but how mutch do sand off..... its always a question😲 i do fhink i need to take more off at the stem and stern here there are some small dips etc here and there ... but its not going to be perfect as chucks cheerful😉 JpR62, Dubz, paulsutcliffe and 5 others 8 Quote Link to comment Share on other sites More sharing options...
Chuck Posted July 13, 2019 Share #9 Posted July 13, 2019 Getting there!!!! it looks really good. mtaylor 1 Quote Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
svein erik Posted July 14, 2019 Author Share #10 Posted July 14, 2019 Thanks everyone 😊I yust order the yellow cedar wood for this prodjekt, so chuck.... send it fast, I May need it wery Soon. .. LOL well I do have to finish the fairing first and the gun port sills. I do have some 1/4" boxvood leftovers for this😉 Svein.erik mtaylor and Chuck 2 Quote Link to comment Share on other sites More sharing options...
svein erik Posted July 14, 2019 Author Share #11 Posted July 14, 2019 oki, i have bin sanding the hell out of the hull today😇 and i think am ready for the nex task.... the stern peases and sills, wel i hope i may have to sleep on it😅 but here is my cheerful hull ! svein erik GrandpaPhil, Ryland Craze, mtaylor and 3 others 6 Quote Link to comment Share on other sites More sharing options...
svein erik Posted July 15, 2019 Author Share #12 Posted July 15, 2019 Thanks for the liks, After all the fairing of the hull , am over to the stern fraim I did some sanding first before it wil be glued on later so I think thats it on fairing the hull😊 Svein.erik JpR62, KARAVOKIRIS, mtaylor and 5 others 8 Quote Link to comment Share on other sites More sharing options...
svein erik Posted July 16, 2019 Author Share #13 Posted July 16, 2019 battens for the gunport sills, i hope its smoot as it gets😊 svein erik John Cheevers, JpR62, mtbediz and 8 others 11 Quote Link to comment Share on other sites More sharing options...
RickyGene Posted July 17, 2019 Share #14 Posted July 17, 2019 Am watching your build. Looking forward to more of this project. Do you after getting the frame too this point have any tips for what you had to think on or encountered during this assembly. I purchased this semi-scratch parts project back in 2017. Have it laid out on the work table just starting to clean and prep f/rabbit. Rick mtaylor 1 Quote Neophyte Shipwright Wisdom: When all else fails, read the instructions! Link to comment Share on other sites More sharing options...
svein erik Posted July 18, 2019 Author Share #15 Posted July 18, 2019 9 hours ago, RickyGene said: Am watching your build. Looking forward to more of this project. Do you after getting the frame too this point have any tips for what you had to think on or encountered during this assembly. I purchased this semi-scratch parts project back in 2017. Have it laid out on the work table just starting to clean and prep f/rabbit. Rick hi Rick before i start fairing the hull i always try to look on photo and plan it in my head as best i can , chuck always try to tell not to rush thrue this at this point . am also using chuck's metod for planking the model, and at this point am using photo ... photo speeks for it self ... wel for me anyway, i do have mistake but try always to learn from it . this prodjekt my task is to learn more and be better to planking the hull using chuck metod . chucks kit and parts is one of the best , so have a fun with this build 😊 my nex photo is coming soon ... then i wil be at the point of start planking ... svein erik mtaylor, RickyGene, JpR62 and 1 other 4 Quote Link to comment Share on other sites More sharing options...
svein erik Posted July 19, 2019 Author Share #16 Posted July 19, 2019 thanks for likes, the cheerful build is going nicly farword at this time, the sills are finish and the stern frame is glued on and sanded down to match the planks, next is to make the port sills at the stern and determine the wales before planking..... still waiting for the lumber... svein erik GrandpaPhil, Ryland Craze, mtaylor and 4 others 7 Quote Link to comment Share on other sites More sharing options...
svein erik Posted July 19, 2019 Author Share #17 Posted July 19, 2019 yeeeee.... i think i did a mistake here at the stern.... i need to notch the stern pease a bit more here because if i plank it like this it wil stick out , well its not a big deal now so i redo it , i dident see the trap here😲 GrandpaPhil, JpR62, KARAVOKIRIS and 2 others 5 Quote Link to comment Share on other sites More sharing options...
RickyGene Posted July 20, 2019 Share #18 Posted July 20, 2019 From what I see of your build, you will correct and continue w/this excellent build. Rick mtaylor 1 Quote Neophyte Shipwright Wisdom: When all else fails, read the instructions! Link to comment Share on other sites More sharing options...
svein erik Posted July 26, 2019 Author Share #19 Posted July 26, 2019 thanks for likes and comments, working my way to start planking, chuck.... i havent got the lumber yet😲.... wel , i have adjust the last rear bulkheads i over sanded it , an i have started to paint the ports with crimson read paint . svein-erik john2013, mtaylor, Ryland Craze and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Kurt Johnson Posted July 26, 2019 Share #20 Posted July 26, 2019 Hej min van, Couldn’t resist, my father’s father was Swedish, my father’s mother Norwegian. Everybody on my mother’s side Irish. I only know enough phrases and words in all three to get my butt kicked badly, except for all the Christmas phrases. Anyway your Cheerful is coming along nicely. I’m currently building her in Alaskan Cedar. Adjo, Kurt mtaylor 1 Quote Member: Ship Model Society of New Jersey Link to comment Share on other sites More sharing options...
svein erik Posted July 26, 2019 Author Share #21 Posted July 26, 2019 6 minutes ago, Kurt Johnson said: Hej min van, Couldn’t resist, my father’s father was Swedish, my father’s mother Norwegian. Everybody on my mother’s side Irish. I only know enough phrases and words in all three to get my butt kicked badly, except for all the Christmas phrases. Anyway your Cheerful is coming along nicely. I’m currently building her in Alaskan Cedar. Adjo, Kurt hello...😂😂 hei min venn , thats wat you wrote , this is the norwegian way😉 yes its coming along now , but i need to wat for the lumber so i can start planking, so i wil go over to the syren build wile i wait😊 svein-erik mtaylor 1 Quote Link to comment Share on other sites More sharing options...
Kurt Johnson Posted July 26, 2019 Share #22 Posted July 26, 2019 (edited) Like I said. You can now kick my butt. The Irish phrases will really, really get me in trouble. You would think I would learn by now, wouldn’t you. Kurt Edited July 26, 2019 by Kurt Johnson mtaylor and svein erik 2 Quote Member: Ship Model Society of New Jersey Link to comment Share on other sites More sharing options...
svein erik Posted July 27, 2019 Author Share #23 Posted July 27, 2019 ok... i have deside not to wait for the alaskan ceder lumber and started to make the first planks for the wales using basswood strips milled down to 3/64 by 5/32 (first layer) for the molding i yust used boxwood strips milled down to 3/64 by 1/16 (first layer) then i have a start wile waiting for the wood😊 svein-eeik mtaylor and Ryland Craze 2 Quote Link to comment Share on other sites More sharing options...
Kurt Johnson Posted July 27, 2019 Share #24 Posted July 27, 2019 (edited) Just remember when you add the second layer to the wales, that as the wales approach the stem they taper their thickness until the wale is the same thickness as the regular planks at the stem. They no longer stand proud of them. You may want to taper the first layer a bit so that the second layer doesn’t become tapered paper thin. In other words taper both layers equally to obtain the finale thickness where they meet the stem. I would wait until you have the lumber you need to figure out how you want to achieve the taper. Chuck stated he overlooked this detail and had to go back to correct it. I know he did it deliberately to make him look as if he is a mere mortal. He’s very sneaky that way. Since the wale is painted black, it really does’t matter what type of wood you use, as long as it will take a decent finish (paint or dye). Is your building board some type of butcher block? If so that would cost a fortune in the US. Kurt Edited July 27, 2019 by Kurt Johnson mtaylor 1 Quote Member: Ship Model Society of New Jersey Link to comment Share on other sites More sharing options...
Chuck Posted July 27, 2019 Share #25 Posted July 27, 2019 Your cedar has arrived in Norway....Probably get it today or on Monday. Ten days https://tools.usps.com/go/TrackConfirmAction?tLabels=la095465259us Chuck mtaylor 1 Quote Chuck Passaro - MSW Admin Sloop Speedwell - POF scratch Block Island Boat - POF scratch HMS Winchelsea - POB scratch build HM Cutter Cheerful - POB scratch build Royal Barge - POF scratch Medway Longboat- POF Scratch SYREN SHIP MODEL COMPANY Link to comment Share on other sites More sharing options...
svein erik Posted July 27, 2019 Author Share #26 Posted July 27, 2019 43 minutes ago, Kurt Johnson said: Just remember when you add the second layer to the wales, that as the wales approach the stem they taper their thickness until the wale is the same thickness as the regular planks at the stem. They no longer stand proud of them. You may want to taper the first layer a bit so that the second layer doesn’t become tapered paper thin. In other words taper both layers equally to obtain the finale thickness where they meet the stem. I would wait until you have the lumber you need to figure out how you want to achieve the taper. Chuck stated he overlooked this detail and had to go back to correct it. I know he did it deliberately to make him look as if he is a mere mortal. He’s very sneaky that way. Since the wale is painted black, it really does’t matter what type of wood you use, as long as it will take a decent finish (paint or dye). Is your building board some type of butcher block? If so that would cost a fortune in the US. Kurt thanks kurt, i diddent think of that😲 yes i think am wait for the vood, but am going to use the basswood plank as an template /test planking. and yes its a butcher block😆 but from IKEA.... and i think the cost is about 9$ svein erik mtaylor 1 Quote Link to comment Share on other sites More sharing options...
Kurt Johnson Posted July 27, 2019 Share #27 Posted July 27, 2019 The board looks a little thin by what would normally sell for butcher block here which is normally over a 1 1/4 inch thickness ( about 32mm) if maple, easily $75.00. mtaylor 1 Quote Member: Ship Model Society of New Jersey Link to comment Share on other sites More sharing options...
svein erik Posted July 27, 2019 Author Share #28 Posted July 27, 2019 53 minutes ago, Chuck said: Your cedar has arrived in Norway....Probably get it today or on Monday. Ten days https://tools.usps.com/go/TrackConfirmAction?tLabels=la095465259us Chuck only 10 days.... its feels like forever...LOL it has arived when i trak it, bit it was to big for the mailbox so i have to go to the post office to get it on Monday😆 svein erik mtaylor and Chuck 2 Quote Link to comment Share on other sites More sharing options...
svein erik Posted July 28, 2019 Author Share #29 Posted July 28, 2019 test fittings the wales plank ond i have started to add the first molding strip( boxwood) nothing mutch but its growing😁 svein erik mtaylor 1 Quote Link to comment Share on other sites More sharing options...
svein erik Posted July 28, 2019 Author Share #30 Posted July 28, 2019 ups... here is the photo😨 GrandpaPhil, mtbediz, Mirabell61 and 6 others 9 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.