Kevin Posted June 28, 2021 Share #61 Posted June 28, 2021 i had to learn to solder, it is getting better as i tend to find reasons to do it now, learnt about different temp solders and found carrs green brilliant the etch primer i should think is out of date now i hate airbrushing, hence abandoned the build, i have a decent compressor, evolution guns, and never ever got a decent result on anything Canute 1 Quote Its all part of Kev's journey, bit like going to the dark side, but with the lights on All the best Kevin SAY NO TO PIRACY. SUPPORT ORIGINAL IDEAS AND MANUFACTURERS. KEEP IT REAL! ------------------------------------------------------------------------------------------------------------------------------------------------------ On the build table HMS Indefatigable 1794 by Kevin - Vanguard Models - 1:64 - Feb 2023 Belle Poule 1834 by Kevin - OcCre - 1/90 - French frigate - started June 2024 - - On hold MHS Britannic by Kevin SD 14 - Marcle Models - 1/70 - March 2022 - Bluebell - Flower Class - Revel - 1/72 U552 German U Boat - Trumpeter - 1/48 Amerigo Vespucci 1/84 - Panart- HMS Enterprise -CAF - 1/48 Finished Hercules by Kevin - OcCre - 1/50 - Tugboat - Finished - May 2024 Nectan-Mountfleet-models-steam-trawler-1/32 - Completed June 2020 HMS Victory - Caldercraft/Jotika - 1/72 - Finished Dorade renamed Dora by Kevin - Amati - 1/20 - Completed March 2021 Stage Coach 1848 - Artesania Latina - 1/10 -Finished Lady Eleanor by Kevin - FINISHED - Vanguard Models - 1/64 - Fifie fishing boat Link to comment Share on other sites More sharing options...
RGL Posted June 28, 2021 Share #62 Posted June 28, 2021 Nice. Canute 1 Quote Greg Link to comment Share on other sites More sharing options...
Hsae Posted June 28, 2021 Author Share #63 Posted June 28, 2021 (edited) Thank you for all the comments and likes.🙃 Kevin, thank you for posting the photos. It is tough to find Carr’s soldering stuff here in the US. So far I am happy what I have. I only need more praxis to get nice clean soldering lines. 😉 For what we’re you using the Phoenix Precision products. Is it just a cleaner & primer? Edited June 28, 2021 by Hsae lmagna 1 Quote Link to comment Share on other sites More sharing options...
Hsae Posted June 29, 2021 Author Share #64 Posted June 29, 2021 For same time I am fuzzing around with replicating rivets. I got the decal rivets from Archer ($$$) and HGW Models ($). The rivets from Archer seems to be a little bit better than HGW, but the final verdict is not out yet. I have to do some more testing. I was also trying to replicate rivets with a syringe & glue. The best glue so far was Titebond. The results are quite promising. The challenge is here to get them lined up and with the same distance between them. I was thinking to make a template for accomplishing this task. Does anybody have experience with replicate rivets? The top rows are with Elmers, the lower rows are with Titebond. mtaylor, lmagna, Landlubber Mike and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Hsae Posted June 29, 2021 Author Share #65 Posted June 29, 2021 (edited) According to an article (In Tribute to Riveted Ships by Harry Benford) the rivet diameter is: “They varied in diameter from 1/2 inch to 1 1/4 inch in 1/8 inch increments …” In a scale of 1/72 we would get with a rivet diameter of say 0.75” in real life, a Modell rivet of 0.01” or 0.26 mm Edited June 29, 2021 by Hsae mtaylor and Canute 2 Quote Link to comment Share on other sites More sharing options...
Hsae Posted June 30, 2021 Author Share #66 Posted June 30, 2021 I tried tonight to do some rivets. I was using the 0.36 mm Archer rivets. Let me say this, it is not easy! And I don’t know if it is worth the effort. Old Collingwood, mtaylor, Landlubber Mike and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Hsae Posted June 30, 2021 Author Share #67 Posted June 30, 2021 I did also the breakwater, but I messed them up. According to instruction you have to fold the top forwards and downwards through 180 degrees…. Didn’t work for me. I replaced them with plastic and glued a 1/4 round to it. lmagna, Canute, Old Collingwood and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Hsae Posted July 3, 2021 Author Share #68 Posted July 3, 2021 (edited) Thank you for all the thumbs up! I was working on the hawseholes. This will also be done from the inside of the hull, after gluing the deck in. Unfortunately I didn’t receive the parts for the portholes yet, so I can’t finish the hull. Edited July 4, 2021 by Hsae Canute, hof00, Old Collingwood and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Hsae Posted July 3, 2021 Author Share #69 Posted July 3, 2021 (edited) I also upgrade the doors … Edited July 4, 2021 by Hsae hof00, Old Collingwood, mtaylor and 3 others 5 1 Quote Link to comment Share on other sites More sharing options...
Hsae Posted July 3, 2021 Author Share #70 Posted July 3, 2021 (edited) And finally I was working on the anchor windlass. The photo etched parts are phenomenal, you can even see the threads. However I still have to decide how I am add the band breaks. And I guess I have to paint the anchor windlass white, how it be can seen at the Snowberry photo. Edited July 4, 2021 by Hsae mtaylor, lmagna, hof00 and 3 others 6 Quote Link to comment Share on other sites More sharing options...
Hsae Posted July 3, 2021 Author Share #71 Posted July 3, 2021 I also was working on the rivets at the forecastle. I still need to touch up here and there. The wooden deck is not glued into place yet. lmagna, Canute, Landlubber Mike and 5 others 8 Quote Link to comment Share on other sites More sharing options...
Hsae Posted July 5, 2021 Author Share #72 Posted July 5, 2021 Small update, working on photo etched parts. I still have to glue/ solder them together. mtaylor, lmagna, Canute and 5 others 8 Quote Link to comment Share on other sites More sharing options...
Hsae Posted July 6, 2021 Author Share #73 Posted July 6, 2021 Now the tricky part, to solder everything… yvesvidal, Landlubber Mike, Old Collingwood and 4 others 7 Quote Link to comment Share on other sites More sharing options...
Hsae Posted July 9, 2021 Author Share #74 Posted July 9, 2021 (edited) Sorry for the delay. I didn’t have much time for modeling lately. I am also waiting for some reference material which I am hoping to get next week. Cross your fingers. Edited July 9, 2021 by Hsae lmagna, Canute and mtaylor 3 Quote Link to comment Share on other sites More sharing options...
Old Collingwood Posted July 9, 2021 Share #75 Posted July 9, 2021 Excellent work - thinking outside the box to make things extra real - love it. OC. Canute, Hsae and mtaylor 3 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Hsae Posted July 9, 2021 Author Share #76 Posted July 9, 2021 (edited) I just got some mail … I finally got my scuttle set & the Hedgedog from a US vendor. I took about 4 weeks to get it. And I got a “test” shipment from NZ. It took about 3 weeks. They shipped it the same day I ordered it! The packing is excellent, and the parts are phenomenal! 👍👍👍 Edited July 9, 2021 by Hsae Landlubber Mike, mtaylor, Old Collingwood and 4 others 6 1 Quote Link to comment Share on other sites More sharing options...
yvesvidal Posted July 9, 2021 Share #77 Posted July 9, 2021 Resin parts are great for details. Yves Hsae, Canute, Old Collingwood and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Hsae Posted July 10, 2021 Author Share #78 Posted July 10, 2021 (edited) Thank you for all the thumbs up and the comments! I was working on the scuttles. I made a little helper and it worked like a charm. Unfortunately I ran into a problem. The aft portholes are bigger than the other portholes. You are happy that the work goes as planned until you hit a problem. But for every problem there is an answer. So I guess I have to fill the portholes and drill them out to the appropriate size. Thankfully there are only eight. Btw, the photo etch parts are awesome! They even put even some gun sights next to the scuttles. Edited July 10, 2021 by Hsae mtaylor, Canute, Old Collingwood and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Hsae Posted July 10, 2021 Author Share #79 Posted July 10, 2021 I had to add two portholes. Starboard & port side approx. 35 mm from the edge. I pre-drilled with a 1/8” drill bit and used after that a #27 (0.1440”) drill bit for the perfect whole size. As well I had to close one porthole at the port side (left) and three at the starboard side (right). Old Collingwood, Canute, hof00 and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Hsae Posted July 11, 2021 Author Share #80 Posted July 11, 2021 My basic photo etch tools: - LED magnifying head band (an absolutely must) I never used the LED’s though. The nice thing with one, you can change magnification - Etch Mate for bending - some good tweezers - sticky pen, comes in handy for positioning small parts - chisel (you can use a hobby knife with sharp blade too) - plexiglass ( black, leftover from a project) for cutting photo etch on it - fine sand paper to remove any “leftovers” on the parts - thin super glue - “regular” super glue - solder iron - flux - solder Old Collingwood, mtaylor, Landlubber Mike and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Hsae Posted July 12, 2021 Author Share #81 Posted July 12, 2021 (edited) Small update the hedgehog is almost done. Little bit cleanup and adjusting. Funny thing, looking at the photos, some parts are crooked. Maybe I can fix it … 🤔 … or build a complete new one and trying to avoid the mistakes I made. Edited July 12, 2021 by Hsae mtaylor, Landlubber Mike, lmagna and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Hsae Posted July 12, 2021 Author Share #82 Posted July 12, 2021 One part I had to take out (black circle), it would fit with the hedgehogs. Maybe I interpreted the instructions wrong. Well, we have to live without it. mtaylor, Old Collingwood, Canute and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Hsae Posted July 12, 2021 Author Share #83 Posted July 12, 2021 (edited) Quite a difference between the kit hedgehog and the GLS hedgehog. If I might say! Edited July 12, 2021 by Hsae Old Collingwood, lmagna, yvesvidal and 3 others 6 Quote Link to comment Share on other sites More sharing options...
yvesvidal Posted July 12, 2021 Share #84 Posted July 12, 2021 Yes, indeed1 Quite a difference ! Yves Old Collingwood, lmagna, clearway and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Hsae Posted July 13, 2021 Author Share #85 Posted July 13, 2021 After looking at the photos from my Hedgehog several times, I decided to build a new Hedgehog. Order went out to GLS this afternoon. Photos are pretty good to discover mistakes. What looks good from the distance, doesn’t look so good anymore closely. I am hoping I am avoiding the previous mistakes. We shall see … Old Collingwood, Landlubber Mike, mtaylor and 2 others 4 1 Quote Link to comment Share on other sites More sharing options...
lmagna Posted July 13, 2021 Share #86 Posted July 13, 2021 On 7/11/2021 at 6:13 PM, Hsae said: Quite a difference between the kit hedgehog and the GLS hedgehog. If I might say! That is an understatement! I built one of the very first Matchbox kits when they first came out in 1979, and even then I was disappointed with the general detail on what was then a very large model. Spent many years sailing many a lake or pond in all kinds of weather. It now sits retired on the basement shelf. A little worn and a bit beat, but could be sailing again tomorrow if I still had the RC gear. Canute, mtaylor, Landlubber Mike and 1 other 4 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Hsae Posted July 13, 2021 Author Share #87 Posted July 13, 2021 Lou, I think is is still a good model. And for its time it was not bad at all. We are now all pampered with photo etch and 3D printing. IMHO it is a respectable model right out of the box, even today. Old Collingwood, Canute, lmagna and 1 other 4 Quote Link to comment Share on other sites More sharing options...
lmagna Posted July 14, 2021 Share #88 Posted July 14, 2021 I keep thinking that I would like to do it again using the decks, PE and especially 3D items available today. The only problem is that when you RC a model, especially when you use it as often as I did mine, things get broken, and small delicate things get broken even faster. Almost all of the more delicate items on mine were replaced with scratch items made from brass sheet, rod, and tubing long ago. mtaylor, Old Collingwood and Canute 3 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Hsae Posted July 14, 2021 Author Share #89 Posted July 14, 2021 (edited) I totally agree. I have some workboats & sailing boats in 1/25 and 1/48 and if you transport / handling / launch them, there always parts which break. Even though I built them robust. In my option fine details are only useful for models which a ideally under glass (dust is a big problem). Edited July 14, 2021 by Hsae Old Collingwood, lmagna and Canute 3 Quote Link to comment Share on other sites More sharing options...
lmagna Posted July 14, 2021 Share #90 Posted July 14, 2021 17 minutes ago, Hsae said: (dust is a big problem). After years of being retired and sitting on a basement shelf I took pity on my poor Corvette and ended up filling the bathtub and sinking her, (After removing all of the RC and running gear). I used a fairly large and soft paint brush and mopped everything down. She looked almost new when I was done. Probably would not be a possible resolution if the ship was not plastic. Landlubber Mike, Old Collingwood, Canute and 2 others 5 Quote Lou Build logs: Colonial sloop Providence 1/48th scale kit bashed from AL Independence Currant builds: Constructo Brigantine Sentinel (Union) (On hold) Minicraft 1/350 Titanic (For the Admiral) 1/350 Heavy Cruiser USS Houston (Resin) Currant research/scratchbuild: Schooner USS Lanikai/Hermes Non ship build log: 1/35th UH-1H Huey Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.