VASA by Lee J H - Artesania Latina - 1/65 scale

[Lee J H]

Spoiler

 

It's a new VASA from Artesania, with a scale of 1/65, which is significantly sized against the Vasa of other kit companies.

If the advantage of  laser cut fits well, and the disadvantage is that it sands the bonding part. 

I have to work on it, but it has more advantages. 

 

The creators of the pramodel seem easy to adapt to than the old kit.

 

[Lee J H]

This time, follow the order listed in the documention.

 

Cut the black paper thinly and place it between the decks.

For me, using paper seems to be the best thing in the results, even if it takes a while.

 

 

Teak oil was used as a finishing agent.

 

 

 

[Lee J H]

Try filling the balsa tree.

I think it would be pointless to buy and fill that expensive tree.

It's become a habit to fire and fill large ships. 

 

It feels like a container line...

Half of that firing amount has been added to the cumbersome task of grinding.

When you're done, it's good to feel comfortable from the time you plan your second round.

 

 

 

 

 

 

 

 

 

 

[baskerbosse]

Looks great!

 

Looking at the hull lines, especially the last picture in the first post, they look good.

Much more accurate than especially Corel ..

 

Cheers,

Peter

[Lee J H]

4 minutes ago, baskerbosse said:

Looks great!

 

Looking at the hull lines, especially the last picture in the first post, they look good.

Much more accurate than especially Corel ..

 

Cheers,

Peter

Yes, it's more accurate than Corel.
However, it is regrettable that the plank tree is not good.
I plan to change the tree.

[Lee J H]

 

 

 

 

 

 

 

 

[Kevin]

the bulkheads look very thin and fragile, i agreee with the balsa infills

 

is a template in the kit for marking out the  gunport locations

[Lee J H]

1 hour ago, Kevin said:

 

The partition wall is thin, so it seems that the walls should be made thin.

Thank you for your support.

[baskerbosse]

Very nice run of the planking.
Is this model double planked?

[Lee J H]

2 hours ago, baskerbosse said:

Very nice run of the planking.
Is this model double planked?

Thank you.
That's right.

We did the first Planking operation.

The second round remains.

Edited October 6, 2021 by Lee J H

[baskerbosse]

Nice!

 

Be careful with the gunports though.

The sills should be parallel to the deck, not the waterline.

 

Peter

[Lee J H]

12 hours ago, baskerbosse said:

Nice!

 

Be careful with the gunports though.

The sills should be parallel to the deck, not the waterline.

 

Peter

I sometimes have doubts about Kit's instructions.
This is because it is usually tailored to the waterline.
This also works while maintaining a right angle, but it is tailored to the waterline.
I'll be careful next time.
Thank you.

[Hubac's Historian]

I just recently discovered that AL has put out this kit.  I am interested to see how what the quality of the kit is, relative to Deagostini.  You are off to a marvelous start!

[Lee J H]

On 2021. 10. 15. at 오전 11시 46분, Hubac's Historian said:

나는 최근에 AL이 이 키트를 내놓았다는 것을 발견했습니다. Deagostini와 비교하여 키트의 품질이 어떤지 알고 싶습니다. 당신은 놀라운 출발을 시작했습니다!

I've never used Deagostini before. By the way, a friend says it's the same product. 

There is a problem. It is inconvenient because there is no paper drawing.

Thank you for your support.

[ubjs]

I have Deagostini-kit and I think it is the same as AL:s.

You could read this forum before building next steps:

https://forum.model-space.co.uk/default.aspx?g=topics&f=540

You have the official build diary of Deagostini Vasa there and some members builds.

 

 

[Lee J H]

 

On 10/27/2021 at 6:46 PM, ubjs said:

I have Deagostini-kit and I think it is the same as AL:s.

You could read this forum before building next steps:

https://forum.model-space.co.uk/default.aspx?g=topics&f=540

You have the official build diary of Deagostini Vasa there and some members builds.

 

 

I went to the site now.
I think it'll be a good teaching for me.
Thank you so much for your help.

[Lee J H]

I work on the rear part.

[Lee J H]

[Lee J H]

I worked on the firework with a thick walnut tree.

[Hubac's Historian]

Nice planking job!

[md1400cs]

Lee,

 

You are off to a very good start - will follow along as well.

 

Regards,

[Lee J H]

20 hours ago, md1400cs said:

Lee,

 

You are off to a very good start - will follow along as well.

 

Regards,

I'm so flattered.
I've seen your wonderful corel Wasa.

I will work hard, but I don't know if it will be completed well.

Please give me a lot of advice.

 

[Lee J H]

On 10/30/2021 at 8:49 AM, Hubac's Historian said:

Nice planking job!

Thank you for your support.

[md1400cs]

Lee,

 

Thanks for your kind words - will be very happy to assist with anything that you might require ....

[Lee J H]

1. 

Edited December 5, 2021 by Lee J H

[Hubac's Historian]

Very nice!

[Lee J H]

Start the 1st planing.
Use a walnut 1mm wood different from the contents.

Start at the location indicated in the tutorial.
However, it is also a bit of a strange location.

[Lee J H]

First, let's proceed like this.

[Hubac's Historian]

Looks awesome!  The walnut will make for nice color and finish.

[Lee J H]

45 minutes ago, Hubac's Historian said:

 

Thank you. hubac.
Please understand even if your English is not good.

 

I think so too.
Walnut is difficult to handle, but the color is profound and nice