mij Posted September 24, 2013 #1 Posted September 24, 2013 I have started to build HMS Sussex 1693 from the plans by Gilbert McArdle, all the frames will be made from tulipwood. These first two pictures show how I fitted a removable keel by fitting a piece of brass tube into the baseboard and a smaller piece of brass tube to the keel. The tulipwood being planed for the keel Milling the tulipwood for the forward frames The frame templates are glued to the tulipwood, the glue I use is a non-toxic washable glue stick Cutting out the frames mtaylor, shipmodel, avsjerome2003 and 4 others 7 Quote xebec 1:60 scale, scratch build
mij Posted September 24, 2013 Author #2 Posted September 24, 2013 Hi Brian It should only take me 2 to 3 years to build. mij Jeronimo 1 Quote xebec 1:60 scale, scratch build
mij Posted September 30, 2013 Author #3 Posted September 30, 2013 Sanding the forward frames Milling the stem scarf Forward frames fitted to the keel and deadwood This is one of my main machines, an old 3 wheel, 104" INCA bandsaw. mij Jeronimo, Wishmaster, harvey1847 and 5 others 8 Quote xebec 1:60 scale, scratch build
mij Posted September 30, 2013 Author #4 Posted September 30, 2013 Quote xebec 1:60 scale, scratch build
egkb Posted September 30, 2013 #5 Posted September 30, 2013 Wow, some serious equipment going on there... nice Eamonn Quote Current Build : HM Schooner Ballahoo In the Pipeline : HM Cutter Sherbourne, HM Mortar Convulsion, Emma C Berry & C18th English Longboat.. Eventually That Is..🙄
gjdale Posted September 30, 2013 #6 Posted September 30, 2013 (edited) This looks to be an interesting build. I have the book by Gib McArdle and will be very interested to see the model built up from his plans. Edited September 30, 2013 by gjdale Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout
shipmodel Posted September 30, 2013 #7 Posted September 30, 2013 Very nice work in a larger scale. I'm willing to spend a few years following your journey. Are you fairing the insides of the frames as you go along, or will you wait till the exteriors are faired? Dan . Quote Current build -Khufu solar barge, c. 2,560 BCE, a cross-section model at 1:10 scale Prior scratch builds - Royal yacht Henrietta, USS Monitor, USS Maine, HMS Pelican, SS America, SS Rex, SS Uruguay, Viking knarr, Gokstad ship, Thames River Skiff , USS Oneida, Swan 42 racing yacht, Queen Anne's Revenge (1710), SS Andrea Doria (1952), SS Michelangelo (1962) , Queen Anne's Revenge (2nd model) USS/SS Leviathan (1914), James B Colgate (1892), POW bone model (circa 1800) restoration, SS Mayaguez (c.1975) Prior kit builds - AL Dallas, Mamoli Bounty. Bluejacket America, North River Diligence, Airfix Sovereign of the Seas "Take big bites. Moderation is for monks." Robert A. Heinlein
mij Posted September 30, 2013 Author #8 Posted September 30, 2013 Hi Dan Yes, I shall be fairing the frames on the inside as I go along. I like to have it looking neat as possible. mij Quote xebec 1:60 scale, scratch build
cookster Posted September 30, 2013 #9 Posted September 30, 2013 Good work MJ! I'll follow along. I particularly want to see how you use your mill to make parts. How big will she be when done? Masted and rigged? OK, I'll stop with the questions. Quote Wes Cook Current Build: USF Constitution (Model Shipways) USF Essex (Scratch build) MS Syren (build log lost, need to rebuild) Future Builds: MS Confederacy
dvm27 Posted September 30, 2013 #10 Posted September 30, 2013 Excellent start MJ! I love the indexed setup you're using. Insuring the frames are centered and the maximum height of breadth is where it belongs should be relatively easy with this jig. Quote GregwebsiteAdmiralty Modelsmoderator Echo Cross-section buildAdmiralty Models Cross-section BuildFinished buildPegasus, 1776, cross-sectionCurrent buildSpeedwell, 1752
mij Posted October 1, 2013 Author #11 Posted October 1, 2013 The mill I`m using is a Proxxon mill/drill-complete system BFW40E, the model will be 47" long and will be built as a navy board model. m i j Quote xebec 1:60 scale, scratch build
harvey1847 Posted October 1, 2013 #12 Posted October 1, 2013 Good luck mij! I will folow you aswel Daniel Quote In the shipyard: HMS Triton 1773. POF. 1:48. Daniel On the computer: R.A. Principe de La Paz. POF. 1:48. Daniel
mij Posted October 1, 2013 Author #13 Posted October 1, 2013 Thanks guys mij Quote xebec 1:60 scale, scratch build
EdT Posted October 1, 2013 #14 Posted October 1, 2013 God start Mij. I look forward to following your progress. Ed Quote All EdT posted material Copyright 2016 Edward J Tosti Young America - extreme clipper 1853 Young America POB Version Modeling the Extreme Clipper Young America Vol 1 1:60 HMS Naiad 1797 The Naiad Frigate Vol I The Naiad Frigate Vol II1:96 Victory
mij Posted October 2, 2013 Author #15 Posted October 2, 2013 Here are some photos of HMS Sussex from the Authors book This will be an interesting an challenging project for me, and I know I shall have the support from you when I neeed it. mij harvey1847, AnobiumPunctatum, Archi and 3 others 6 Quote xebec 1:60 scale, scratch build
Michiel Posted October 2, 2013 #16 Posted October 2, 2013 That's a nice set of tools you have there. What are the dimensions of that spindel sander? I have been considdering one of those, but I'm not sure yet.. Michiel Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
mij Posted October 2, 2013 Author #17 Posted October 2, 2013 With out measuring the spindel sander, (as I`m at work) the top plate must be 12" square and the body 18" high. If your building a framed model, it`s a must have. mij Quote xebec 1:60 scale, scratch build
Michiel Posted October 2, 2013 #18 Posted October 2, 2013 thanks, I'm currently not building with real frames but the next one is sure to be so. Quote Finished models: Botter, President Current: Prins Willem by the book of Ketting, HMS Beagle - OcCre restauration of a Statenjacht
EdT Posted October 2, 2013 #19 Posted October 2, 2013 Impressive tool collection, mij. I will add a few thoughts about the spindle sander. It is a very useful tool for sanding the insides of curves. I would recommend an oscillating type to avoid sanding the same spot on the drums and one with multiple drum diameters. A would also highly recommend some sort of dust collection on this and all power sanders. This can be as simple as a shop vacuum connected to the sander and run off a combined switch. Before dust collection my sanding spread dust from the basement throughout the house and I woke up most mornings with congestion - no more. Before buying a spindle sander I used a drum fitted to a table top drill press. All the frames on Naiad were done with this arrangment. Ed Jeronimo 1 Quote All EdT posted material Copyright 2016 Edward J Tosti Young America - extreme clipper 1853 Young America POB Version Modeling the Extreme Clipper Young America Vol 1 1:60 HMS Naiad 1797 The Naiad Frigate Vol I The Naiad Frigate Vol II1:96 Victory
mij Posted October 2, 2013 Author #20 Posted October 2, 2013 Hi Ed This an oscilating sander, and at the back at the base, there is an outlet for a vac. But I don`t always use it, my work shop is an out side garage. mij Quote xebec 1:60 scale, scratch build
mij Posted October 3, 2013 Author #21 Posted October 3, 2013 Here are some of my tools I use for models. SIP bobbin sander Walker Turner drill presss, and Proxxon lathe Proxxon mill/drill Proxxon bench saw A Proxxon small bench saw Draper 16" fretsaw mij Jeronimo, avsjerome2003 and Archi 3 Quote xebec 1:60 scale, scratch build
cookster Posted October 3, 2013 #22 Posted October 3, 2013 nice setup there Mij. I hope Santa Claus brings me a mill this Christmas.... Do you like the Proxxon? For the money they seem OK from what I've read. Quote Wes Cook Current Build: USF Constitution (Model Shipways) USF Essex (Scratch build) MS Syren (build log lost, need to rebuild) Future Builds: MS Confederacy
mij Posted October 3, 2013 Author #23 Posted October 3, 2013 Yes they are great tools for model makers and if you look after them they will last a long time. My latest gift to myself is a Proxxon OZI 220/E Multi tool (Delta sander) which I will use to fair the frames. mij Quote xebec 1:60 scale, scratch build
realworkingsailor Posted October 4, 2013 #24 Posted October 4, 2013 Looks like a very interesting build. Don't see too many ships of this era being built. Nice collection of workshop toys too... Andy mij 1 Quote Quando Omni Flunkus, Moritati Current Build: USF Confederacy
Anja Posted October 13, 2013 #25 Posted October 13, 2013 Hello Mij, Happy birthday. Enjoy it and have a great day. Anja PS - The link in your signature isn't working. mij 1 Quote Those we loved but lost are no longer where they were, but are always where we are. In the gallery: Albatros 1840 - Constructo
mij Posted October 16, 2013 Author #26 Posted October 16, 2013 After fitting 8 full foreward frames, I decided that I was not happy with my build, I built the frames oversize and I was to fair them inside and out as Gilbert McArole done on his build. I used Titebond for all the gluing, so I put my build in a bucket of water to release the glue. It came apart with the use of a pallet knife between the frames, I will have to re-cut 8 more floor timber, because I had to chisel them out of the deadwood (I did say to myself, mind your fingers, I`ve now got a plaster on my index finge on my left hand). I will now fair the frames as I fit them, which is the way I mormally build my models and I am much happier with. First picture of my re-build. These are 2 of my new Proxxon toys Archi and mtaylor 2 Quote xebec 1:60 scale, scratch build
mij Posted October 16, 2013 Author #27 Posted October 16, 2013 Hi Brian It only came yesterday, but I used it on a piece of scrap wood and you can do a lot with it. I`ve got other pads and cutters to go with it. mij Quote xebec 1:60 scale, scratch build
gjdale Posted October 16, 2013 #28 Posted October 16, 2013 Can you tell us the model number of the one on the right in the photo please? I can't seem to spot it on the Proxxon site. Looks cool though! Quote Grant ____________________________________________________ Current builds: African Queen - Radio Control / Live Steam Previous builds: The Shipyard at Foss' Landing (Diorama), Hannah - Ship in a Bottle, NRG Capstan Project, 1869 Allerton Steam Pumper, Medway Longboat , Alfa Romeo Spider Gran Touring (Pocher) , Da Vinci Flying Machine, 1949 Chris Craft 19' Racing Runabout - Dumas - Radio, Bomb Vessel Granado, 1742 - Cross Section - Scratchbuild, HMS Victory (Mamoli 1:90), Cutty Sark, Armed Pinnace, Bounty, Santa Maria At another place: Stephenson's Rocket (OcCre 1:24) (click the title to follow the link) In the Gallery: Lancia Armata 1803, Bomb Vessel Granada, 1742 Cross Section, 1949 Chris Craft 19' Racing Runabout
mij Posted October 16, 2013 Author #29 Posted October 16, 2013 It`s a Proxxon LWS Long Neck Angle Grinder (Ref: 28547) mij gjdale 1 Quote xebec 1:60 scale, scratch build
mij Posted October 21, 2013 Author #30 Posted October 21, 2013 Started to build up the frames. The first picture is the full frame drawn on paper with the floor timber and the top timber tacked to the paper using Copydex. This picture shows the 1st futtock glued to the floor timber and the top timber using Titebond and held in position with 1bl weights. This picture shows the complete frame, slightly over size for fairing. druxey, NMBROOK, Archi and 2 others 5 Quote xebec 1:60 scale, scratch build
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.