3qq Posted April 9, 2014 Author #31 Posted April 9, 2014 Mr Nenad Thank you very very much.... Quote doğan
3qq Posted April 9, 2014 Author #32 Posted April 9, 2014 Sayın Nenad Çok çok teşekkür ederim .... Elmer Cornish and Mirabell61 2 Quote doğan
NenadM Posted April 9, 2014 #33 Posted April 9, 2014 (edited) Mr. Dogan I marked points to pay special attention while mounting, BEFORE planking Be ready to add extra parts to ribs and to cut excessed parts. Nothing serious, it happen almost every time when use "plank on ribs" method, we are not master modellers If you plan to make second plank layer, and paint model in natural colours of real Cutty, then sanding and putty will resolve problems. But, if you do not plan second layer, or intend to keep natural wood colour, then you must pay extra attention to this details. Planks must run smooth around ship, and symmetrical on both sides. If do not, you will have unsymmetrical model, and you do not want this Also you can apply different techniques of filling spaces between ribs, to help planks to lay better. There is a lot articles on MSW about that Keep good work ! Edited April 9, 2014 by Nenad M 3qq and Elmer Cornish 2 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic
3qq Posted April 11, 2014 Author #34 Posted April 11, 2014 Sevgili MR. KAZIM Gürhan yilinda Önemli Parçası Sağ olsun rahatsiz etmeden Yeniden Dikkat dikkat çekti. Elmer Cornish and NenadM 2 Quote doğan
mtaylor Posted April 15, 2014 #35 Posted April 15, 2014 Doğan, Please use Google and translate into English. This is an English forum. garywatt 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned)
NenadM Posted April 17, 2014 #36 Posted April 17, 2014 (edited) Possible solution to connect parts of piece No 20 Under and above is empthy space as I understand Sergal sheets, so you have space to "fill" missing parts od piece No 20 Edited April 17, 2014 by Nenad M Elmer Cornish and 3qq 2 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic
3qq Posted April 17, 2014 Author #37 Posted April 17, 2014 Thank you very much. BE RIGHT. understood Quote doğan
Donny Posted June 25, 2014 #38 Posted June 25, 2014 Your work is so accurate and clean. Very good and admirable! Well done. 3qq 1 Quote
3qq Posted July 4, 2014 Author #39 Posted July 4, 2014 cutty 2014 ........ mtaylor and Elmer Cornish 2 Quote doğan
3qq Posted July 7, 2014 Author #40 Posted July 7, 2014 Çalışma HAFTA SONU Elmer Cornish, rfolsom and mtaylor 3 Quote doğan
NenadM Posted July 7, 2014 #41 Posted July 7, 2014 Nice to see progress on your model. Keep on 3qq 1 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic
3qq Posted July 9, 2014 Author #42 Posted July 9, 2014 Cutty Sark:. Ne yapmalıyım için Ben Doğal su hatti Tutmak Teşekkür ederim. iyi çalışmalar. Elmer Cornish and rfolsom 2 Quote doğan
3qq Posted July 14, 2014 Author #43 Posted July 14, 2014 I tried to make a single piece of wood veneer. Elmer Cornish, NenadM and mtaylor 3 Quote doğan
3qq Posted July 18, 2014 Author #44 Posted July 18, 2014 Ben bu karanlığı nasıL yapabilirim. Boşver Elmer Cornish and mtaylor 2 Quote doğan
NenadM Posted July 18, 2014 #45 Posted July 18, 2014 Nice work on hull. Keep on and go on! 3qq 1 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic
3qq Posted July 31, 2014 Author #46 Posted July 31, 2014 I tried to do nails and nail effect. Come easily to everyone. Good models. archjofo, NenadM, mtaylor and 2 others 5 Quote doğan
NenadM Posted July 31, 2014 #47 Posted July 31, 2014 There was a lot of work 3qq 1 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic
3qq Posted August 4, 2014 Author #48 Posted August 4, 2014 I think you will too. But the least I can do the job. rfolsom, mtaylor and clearway 3 Quote doğan
3qq Posted September 1, 2014 Author #49 Posted September 1, 2014 Herkese merhaba. Biraz yol var. Bence.Hello, everyone. I got a little way. I think. NenadM, mtaylor, Omega1234 and 2 others 5 Quote doğan
NenadM Posted September 1, 2014 #50 Posted September 1, 2014 She is coming along nicely !!! 3qq 1 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic
3qq Posted September 2, 2014 Author #51 Posted September 2, 2014 mr. Nenad. Folsom and you guys are good examples, and I would imitate. I learned a lot from you. thank you. Thank you NenadM and rfolsom 2 Quote doğan
3qq Posted October 30, 2014 Author #52 Posted October 30, 2014 I'm still waiting for Nenad gentlemen. Omega1234, rfolsom, mtaylor and 1 other 4 Quote doğan
NenadM Posted October 30, 2014 #53 Posted October 30, 2014 I'm still waiting for Nenad gentlemen. I am waiting too 3qq 1 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic
keelhauled Posted January 2, 2015 #55 Posted January 2, 2015 Good start! you might want to clip the nail heads on the hull. They are a little large and may interfere with coppering the bottom, should you choose to do so. marc 3qq 1 Quote Currently building the Cutty Sark http://modelshipworld.com/index.php?/topic/1000-cutty-sark-by-keelhauled-mantua-kit-bashed-first-wooden-ship-build/
3qq Posted July 7, 2015 Author #56 Posted July 7, 2015 I got a little bit of road mtaylor and Omega1234 2 Quote doğan
Omega1234 Posted July 8, 2015 #57 Posted July 8, 2015 Nice job on the ship's boat! 3qq 1 Quote MY SCRATCH BUILT MODELS ARE: Splendid Mega Yacht https://modelshipworld.com/topic/28576-splendid-by-omega1234-scale-1500-mega-yacht/ Majestic Mega Yacht https://modelshipworld.com/topic/28483-mega-yacht-majestic-by-omega1234-miniature/ Sapphire Mega yacht https://modelshipworld.com/topic/21088-sapphire-by-omega1234-1388-scale-mega-yacht-66m-8-inch-hull-length/?tab=comments#comment-639898 Genesis - Supersports Mega Yacht https://modelshipworld.com/topic/18168-genesis-by-omega1234-1300-49m-mega-yacht-8-inches-long-finished/?tab=comments#comment-559026http://modelshipworld.com/index.php/topic/14141-shadow-by-omega1234-scale-1300-luxury-60m-mega-yacht-8-inches-long/ SHADOW Luxury Motor Yacht http://modelshipworld.com/index.php/topic/11384-majellan-by-omega1234-luxury-37-metre-motor-yacht-miniature-7-inches-approx/ Majellan Luxury Motor Yacht http://modelshipworld.com/index.php/topic/9261Rainbow-j-class-racing-yacht/?p=273543 Rainbow J Class Racing Yacht Mystic Classic Motor Cruiser Symphony Ingomar Schooner: Scratch build Dorade Schooner: <p> Lennox Restoration Warship http://modelshipworld.com/index.php/topic/9577-pandora-cutaway-dockyard-style-miniature/?hl=pandora
keelhauled Posted July 29, 2015 #58 Posted July 29, 2015 looking good! keep it up! Omega1234 1 Quote Currently building the Cutty Sark http://modelshipworld.com/index.php?/topic/1000-cutty-sark-by-keelhauled-mantua-kit-bashed-first-wooden-ship-build/
3qq Posted June 13, 2017 Author #59 Posted June 13, 2017 I went a little further. mtaylor and NenadM 2 Quote doğan
NenadM Posted June 15, 2017 #60 Posted June 15, 2017 Bravo ! mtaylor and 3qq 2 Quote In progress: CUTTY SARK - Tehnodidakta => scratch => Campbell plans http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-1#entry64653 Content of log : http://modelshipworld.com/index.php/topic/2501-cutty-sark-by-nenad-tehnodidakta-scratched-campbells-plans/page-62#entry217381 Past build: Stella, Heller kit, plastic, Santa Maria, Tehnodidakta kit, wood, Jolly Roger Heller kit, plastic
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.