-
Posts
4,101 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by Landlubber Mike
-
How many kits do you have on the go at the moment?
Landlubber Mike replied to CaptnBirdseye's topic in Wood ship model kits
I get bored or burned out, so to keep modeling, I start another. I know others feel differently, but I personally don't care if I finish a model. In a lot of ways its anticlimactic for me, and I've been more about the journey than the destination anyway. Plus, I haven't quite figured out where and how I'll store or display my finished models. For me, I have 3 wooden ships, 3 plastic ships, and another 7 plastic car and plane models in progress. I'm at the point where almost all the plastic kits are completed, so I'll have to focus on the wooden ships -- or better yet, start another half dozen plastic kits 😬 -
Depending on the bottle opening and placement, I could see maybe creating two pre-formed sets of railings (one for port other for starboard), and then gluing them on after the ship is inserted. That might take a lot of dexterity to do though! Inserting after will avoid bending the rail or crushing the stanchions. You could always use a stiffer wire like copper for the rail which will set after being bent and resist bending better than brass wire. That would make it easier to keep the rail in shape when inserting. What’s hard is securing the stanchions at such small scale, as you can’t really pin them to the hull. On one I’m currently working on, it didn’t have railings thankfully but I tried using very thin plywood for the bulwarks that I glued to the hull. Really couldn’t get it to work. Ended up keeping the bulwarks and hull from a a single piece of wood, and just have to live with the out of scale effect.
-
Really nice work Glen, nice job! Railings at this scale, especially in a SIB build, are really tricky. You can make them to scale, but my guess is that they likely will be so fragile that they won't survive the insertion into the bottle process (the photo etch railings on my 1/350 and 1/700 certainly wouldn't survive the insertion process). Or you could make them stronger, but likely will be out of scale. I guess it's a balance.
-
Looking great Egilman. Cool that you can see so much engine detail on these! I happened to come across some new helicopter resin engines , rotors, and other parts that Reskit is putting out. They look really fantastic. Not sure if they have any parts for your particular model, but just wanted to pass that along.
-
Tiger 1 by Javlin - RFM - 1/35 - Early Version
Landlubber Mike replied to Javlin's topic in Non-ship/categorised builds
Looking great Kevin. Wow, that's a lot of detail! -
You should be able to buy generic rails from a variety of manufacturers to replace the ones from your kit. I wouldn’t be surprised if Flyhawk offers them.
-
For what it's worth, for most things, I attach the parts unpainted and then paint when I have the assembly completed. First use primer (Mr. Surfacer) and then paint - Tamiya, Mr. Color, Vallejo, etc. For parts I'm going to include at the very end after most of the model is already assembled (e.g., the railings where there is a linoleum or wood deck), I'll prime and paint them while on the fret, attach them, then hand paint to touch up. It's fairly easy to do touch ups by brush, and I find there isn't too much to touch up. Once attached, I'll spray a clear coat over the entire model.
-
Hi Greg, I saw the title and was thinking to myself, "didn't know Hasegawa made that kit??" Come to find out you're converting the Gambier Bay, very cool! Those pictures with the Ducks and Catalinas look like they would make for a really sweet model. I have the same kit in the stash with a bunch of the same upgrades. If you're looking for plane upgrade sets, Infini makes a USN aircraft details set (I think the one I have is IMP-35036R1). With the Hasegawa and Flyhawk sets, are you thinking the Infini USN radar set is still necessary?
- 126 replies
-
- Thetis Bay
- Finished
- (and 4 more)
-
Nice start King D - looks like a great kit. I have the Lutsow too and the nets are a little intimidating. This will be a nice one to cut your teeth on!
-
Sherline Mill Essential Accessories?
Landlubber Mike replied to No Idea's topic in Modeling tools and Workshop Equipment
As I was reading this I was thinking of suggesting the Beall Collet Chuck for the Sherline as well. I use it to hold pen blanks when drilling the centers out and it works well. The collets I picked up on Amazon or eBay, I forget which. I wasn't particularly concerned about getting super accuracy so Chinese manufactured ones were fine - the ones I managed to pick up a few years ago seem a lot nicer than I was expecting. -
Realistic Water
Landlubber Mike replied to taylormade's topic in Painting, finishing and weathering products and techniques
I have this book and it is fantastic. Highly recommend it! -
Looking really great Ron. Happy holidays!
- 542 replies
-
- Sphinx
- Vanguard Models
-
(and 3 more)
Tagged with:
-
I think that's where a Hold and Fold comes in very handy. It holds the piece in place, while you use a blade to create the bend. I'll also on occasion use the Tamiya folding pliers (they have two sizes) which work well too, but easier to keep things steady in a Hold and Fold.
About us
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful Links
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.