Erik W

I finished the deadeyes and deadeye strops this week.  And set a new personal record for the most discarded/rejected parts.  Haha.  I can laugh now, but at the time, it was the height of frustration.  I think to get the 8 usable deadeye strops shaped correctly and mounted, I wound up with an additional 15 or so I scrapped.  Admittedly most of that was trying to get the first couple formed.  Once I had a system down for shaping them, things went more smoothly.  I wound up chipping the paint off some of the chain plates, so had to touch that up.  And I wound up rubbing off the finish of the annealed wire I used for making the strops from handling too much, so had to blacken those again . . . which made a bit of a mess on the deadeyes from blackening smudges coming off of my fingers.  So, I had to re-sand some of the deadeyes to remove that.  All in all not the most fun part of the build.  So, I'm happy that buttons up Chapter 9 of Chuck's monograph, and I look forward to getting away from handling metal and back to working with wood for the next parts of the build!
 
Erik

I finished the deadeyes and deadeye strops this week.  And set a new personal record for the most discarded/rejected parts.  Haha.  I can laugh now, but at the time, it was the height of frustration.  I think to get the 8 usable deadeye strops shaped correctly and mounted, I wound up with an additional 15 or so I scrapped.  Admittedly most of that was trying to get the first couple formed.  Once I had a system down for shaping them, things went more smoothly.  I wound up chipping the paint off some of the chain plates, so had to touch that up.  And I wound up rubbing off the finish of the annealed wire I used for making the strops from handling too much, so had to blacken those again . . . which made a bit of a mess on the deadeyes from blackening smudges coming off of my fingers.  So, I had to re-sand some of the deadeyes to remove that.  All in all not the most fun part of the build.  So, I'm happy that buttons up Chapter 9 of Chuck's monograph, and I look forward to getting away from handling metal and back to working with wood for the next parts of the build!
 
Erik

I finished the deadeyes and deadeye strops this week.  And set a new personal record for the most discarded/rejected parts.  Haha.  I can laugh now, but at the time, it was the height of frustration.  I think to get the 8 usable deadeye strops shaped correctly and mounted, I wound up with an additional 15 or so I scrapped.  Admittedly most of that was trying to get the first couple formed.  Once I had a system down for shaping them, things went more smoothly.  I wound up chipping the paint off some of the chain plates, so had to touch that up.  And I wound up rubbing off the finish of the annealed wire I used for making the strops from handling too much, so had to blacken those again . . . which made a bit of a mess on the deadeyes from blackening smudges coming off of my fingers.  So, I had to re-sand some of the deadeyes to remove that.  All in all not the most fun part of the build.  So, I'm happy that buttons up Chapter 9 of Chuck's monograph, and I look forward to getting away from handling metal and back to working with wood for the next parts of the build!
 
Erik

I finished the deadeyes and deadeye strops this week.  And set a new personal record for the most discarded/rejected parts.  Haha.  I can laugh now, but at the time, it was the height of frustration.  I think to get the 8 usable deadeye strops shaped correctly and mounted, I wound up with an additional 15 or so I scrapped.  Admittedly most of that was trying to get the first couple formed.  Once I had a system down for shaping them, things went more smoothly.  I wound up chipping the paint off some of the chain plates, so had to touch that up.  And I wound up rubbing off the finish of the annealed wire I used for making the strops from handling too much, so had to blacken those again . . . which made a bit of a mess on the deadeyes from blackening smudges coming off of my fingers.  So, I had to re-sand some of the deadeyes to remove that.  All in all not the most fun part of the build.  So, I'm happy that buttons up Chapter 9 of Chuck's monograph, and I look forward to getting away from handling metal and back to working with wood for the next parts of the build!
 
Erik

I finished the deadeyes and deadeye strops this week.  And set a new personal record for the most discarded/rejected parts.  Haha.  I can laugh now, but at the time, it was the height of frustration.  I think to get the 8 usable deadeye strops shaped correctly and mounted, I wound up with an additional 15 or so I scrapped.  Admittedly most of that was trying to get the first couple formed.  Once I had a system down for shaping them, things went more smoothly.  I wound up chipping the paint off some of the chain plates, so had to touch that up.  And I wound up rubbing off the finish of the annealed wire I used for making the strops from handling too much, so had to blacken those again . . . which made a bit of a mess on the deadeyes from blackening smudges coming off of my fingers.  So, I had to re-sand some of the deadeyes to remove that.  All in all not the most fun part of the build.  So, I'm happy that buttons up Chapter 9 of Chuck's monograph, and I look forward to getting away from handling metal and back to working with wood for the next parts of the build!
 
Erik

I finished the deadeyes and deadeye strops this week.  And set a new personal record for the most discarded/rejected parts.  Haha.  I can laugh now, but at the time, it was the height of frustration.  I think to get the 8 usable deadeye strops shaped correctly and mounted, I wound up with an additional 15 or so I scrapped.  Admittedly most of that was trying to get the first couple formed.  Once I had a system down for shaping them, things went more smoothly.  I wound up chipping the paint off some of the chain plates, so had to touch that up.  And I wound up rubbing off the finish of the annealed wire I used for making the strops from handling too much, so had to blacken those again . . . which made a bit of a mess on the deadeyes from blackening smudges coming off of my fingers.  So, I had to re-sand some of the deadeyes to remove that.  All in all not the most fun part of the build.  So, I'm happy that buttons up Chapter 9 of Chuck's monograph, and I look forward to getting away from handling metal and back to working with wood for the next parts of the build!
 
Erik

I finished the deadeyes and deadeye strops this week.  And set a new personal record for the most discarded/rejected parts.  Haha.  I can laugh now, but at the time, it was the height of frustration.  I think to get the 8 usable deadeye strops shaped correctly and mounted, I wound up with an additional 15 or so I scrapped.  Admittedly most of that was trying to get the first couple formed.  Once I had a system down for shaping them, things went more smoothly.  I wound up chipping the paint off some of the chain plates, so had to touch that up.  And I wound up rubbing off the finish of the annealed wire I used for making the strops from handling too much, so had to blacken those again . . . which made a bit of a mess on the deadeyes from blackening smudges coming off of my fingers.  So, I had to re-sand some of the deadeyes to remove that.  All in all not the most fun part of the build.  So, I'm happy that buttons up Chapter 9 of Chuck's monograph, and I look forward to getting away from handling metal and back to working with wood for the next parts of the build!
 
Erik

I finished the deadeyes and deadeye strops this week.  And set a new personal record for the most discarded/rejected parts.  Haha.  I can laugh now, but at the time, it was the height of frustration.  I think to get the 8 usable deadeye strops shaped correctly and mounted, I wound up with an additional 15 or so I scrapped.  Admittedly most of that was trying to get the first couple formed.  Once I had a system down for shaping them, things went more smoothly.  I wound up chipping the paint off some of the chain plates, so had to touch that up.  And I wound up rubbing off the finish of the annealed wire I used for making the strops from handling too much, so had to blacken those again . . . which made a bit of a mess on the deadeyes from blackening smudges coming off of my fingers.  So, I had to re-sand some of the deadeyes to remove that.  All in all not the most fun part of the build.  So, I'm happy that buttons up Chapter 9 of Chuck's monograph, and I look forward to getting away from handling metal and back to working with wood for the next parts of the build!
 
Erik

I finished the deadeyes and deadeye strops this week.  And set a new personal record for the most discarded/rejected parts.  Haha.  I can laugh now, but at the time, it was the height of frustration.  I think to get the 8 usable deadeye strops shaped correctly and mounted, I wound up with an additional 15 or so I scrapped.  Admittedly most of that was trying to get the first couple formed.  Once I had a system down for shaping them, things went more smoothly.  I wound up chipping the paint off some of the chain plates, so had to touch that up.  And I wound up rubbing off the finish of the annealed wire I used for making the strops from handling too much, so had to blacken those again . . . which made a bit of a mess on the deadeyes from blackening smudges coming off of my fingers.  So, I had to re-sand some of the deadeyes to remove that.  All in all not the most fun part of the build.  So, I'm happy that buttons up Chapter 9 of Chuck's monograph, and I look forward to getting away from handling metal and back to working with wood for the next parts of the build!
 
Erik

I finished the deadeyes and deadeye strops this week.  And set a new personal record for the most discarded/rejected parts.  Haha.  I can laugh now, but at the time, it was the height of frustration.  I think to get the 8 usable deadeye strops shaped correctly and mounted, I wound up with an additional 15 or so I scrapped.  Admittedly most of that was trying to get the first couple formed.  Once I had a system down for shaping them, things went more smoothly.  I wound up chipping the paint off some of the chain plates, so had to touch that up.  And I wound up rubbing off the finish of the annealed wire I used for making the strops from handling too much, so had to blacken those again . . . which made a bit of a mess on the deadeyes from blackening smudges coming off of my fingers.  So, I had to re-sand some of the deadeyes to remove that.  All in all not the most fun part of the build.  So, I'm happy that buttons up Chapter 9 of Chuck's monograph, and I look forward to getting away from handling metal and back to working with wood for the next parts of the build!
 
Erik

I finished the deadeyes and deadeye strops this week.  And set a new personal record for the most discarded/rejected parts.  Haha.  I can laugh now, but at the time, it was the height of frustration.  I think to get the 8 usable deadeye strops shaped correctly and mounted, I wound up with an additional 15 or so I scrapped.  Admittedly most of that was trying to get the first couple formed.  Once I had a system down for shaping them, things went more smoothly.  I wound up chipping the paint off some of the chain plates, so had to touch that up.  And I wound up rubbing off the finish of the annealed wire I used for making the strops from handling too much, so had to blacken those again . . . which made a bit of a mess on the deadeyes from blackening smudges coming off of my fingers.  So, I had to re-sand some of the deadeyes to remove that.  All in all not the most fun part of the build.  So, I'm happy that buttons up Chapter 9 of Chuck's monograph, and I look forward to getting away from handling metal and back to working with wood for the next parts of the build!
 
Erik

I finished the deadeyes and deadeye strops this week.  And set a new personal record for the most discarded/rejected parts.  Haha.  I can laugh now, but at the time, it was the height of frustration.  I think to get the 8 usable deadeye strops shaped correctly and mounted, I wound up with an additional 15 or so I scrapped.  Admittedly most of that was trying to get the first couple formed.  Once I had a system down for shaping them, things went more smoothly.  I wound up chipping the paint off some of the chain plates, so had to touch that up.  And I wound up rubbing off the finish of the annealed wire I used for making the strops from handling too much, so had to blacken those again . . . which made a bit of a mess on the deadeyes from blackening smudges coming off of my fingers.  So, I had to re-sand some of the deadeyes to remove that.  All in all not the most fun part of the build.  So, I'm happy that buttons up Chapter 9 of Chuck's monograph, and I look forward to getting away from handling metal and back to working with wood for the next parts of the build!
 
Erik

I finished the deadeyes and deadeye strops this week.  And set a new personal record for the most discarded/rejected parts.  Haha.  I can laugh now, but at the time, it was the height of frustration.  I think to get the 8 usable deadeye strops shaped correctly and mounted, I wound up with an additional 15 or so I scrapped.  Admittedly most of that was trying to get the first couple formed.  Once I had a system down for shaping them, things went more smoothly.  I wound up chipping the paint off some of the chain plates, so had to touch that up.  And I wound up rubbing off the finish of the annealed wire I used for making the strops from handling too much, so had to blacken those again . . . which made a bit of a mess on the deadeyes from blackening smudges coming off of my fingers.  So, I had to re-sand some of the deadeyes to remove that.  All in all not the most fun part of the build.  So, I'm happy that buttons up Chapter 9 of Chuck's monograph, and I look forward to getting away from handling metal and back to working with wood for the next parts of the build!
 
Erik

chesstree, fenders and the entry steps:
 

@druxey
Hello,
I'm glad you like it. Thanks !
I would also like to thank everyone else for the LIKES.
 
Continuation: Equipment of the mizzen topgallant yard – Vergue de perruche
After a suggestion from model building colleagues, I secured the mousing of the hook for the tye with a thinner three strand rope with a diameter of 0.15 mm that was specially made for this purpose.

We then continued with the quarter blocks (clew lines and sheets), which are among the smallest double blocks on the model.
For the block ropes I used ropes with a diameter of 0.25 mm, which were served with silk yarn.

The last two pictures show the arrangement of the quarter blocks with the truss already attached.


Up soon …

After pulling some hair out, and the remainder going gray, haha, I have finished the backstay plates and chain plates . . . on the port side anyway.  I revisited blackening them, using advice here and on the internet.  My test brass strips looked OK, but I couldn't avoid bare brass spots being rubbed off after lightly wiping them down with a dry cloth.  I'm pretty sure I didn't clean the brass well enough beforehand.  After being left frustrated by that, I just went ahead and followed what Chuck had done on his, and painted them black and used a rust brown weathering powder to give them that iron look.  I'm happy with the results.  A trick I learned years ago as a model railroader with brass, is to bake the brass after painting.  Just put the parts under a hot halogen or incandescence light bulb, about an inch away from the bulb, for about five minutes.  This hardens the paint on the metal surface and makes it much more scuff resistant.  The nails themselves I ordered from ModelExpo (being my first ship build I didn't have any extras from prior builds to use).  They are the smallest ones they offer.  They're slightly rounded on the bottom of the heads, so don't appear the sit flush when pushed in.  So I used a larger diameter drill bit than the holes in the brass were drilled with, and counter sunk all the holes in the backstay and chain plates.  I also ran a sharp angled file on the underside of the heads of each nail.  This helped get the nails to snug down flat when pushed in.  After getting the parts mounted and nailed in place, I went ahead and touched up the paint and weathering powder.
 
Of all the processes involved on this build, metal working is probably the one I have the least experience in.  The backstay plates and chain plates have taken a lot longer than I thought they would.  That said, I've learned a lot, even with the error part of Trial and Error being frustrating at times!
 
Erik

After pulling some hair out, and the remainder going gray, haha, I have finished the backstay plates and chain plates . . . on the port side anyway.  I revisited blackening them, using advice here and on the internet.  My test brass strips looked OK, but I couldn't avoid bare brass spots being rubbed off after lightly wiping them down with a dry cloth.  I'm pretty sure I didn't clean the brass well enough beforehand.  After being left frustrated by that, I just went ahead and followed what Chuck had done on his, and painted them black and used a rust brown weathering powder to give them that iron look.  I'm happy with the results.  A trick I learned years ago as a model railroader with brass, is to bake the brass after painting.  Just put the parts under a hot halogen or incandescence light bulb, about an inch away from the bulb, for about five minutes.  This hardens the paint on the metal surface and makes it much more scuff resistant.  The nails themselves I ordered from ModelExpo (being my first ship build I didn't have any extras from prior builds to use).  They are the smallest ones they offer.  They're slightly rounded on the bottom of the heads, so don't appear the sit flush when pushed in.  So I used a larger diameter drill bit than the holes in the brass were drilled with, and counter sunk all the holes in the backstay and chain plates.  I also ran a sharp angled file on the underside of the heads of each nail.  This helped get the nails to snug down flat when pushed in.  After getting the parts mounted and nailed in place, I went ahead and touched up the paint and weathering powder.
 
Of all the processes involved on this build, metal working is probably the one I have the least experience in.  The backstay plates and chain plates have taken a lot longer than I thought they would.  That said, I've learned a lot, even with the error part of Trial and Error being frustrating at times!
 
Erik

After pulling some hair out, and the remainder going gray, haha, I have finished the backstay plates and chain plates . . . on the port side anyway.  I revisited blackening them, using advice here and on the internet.  My test brass strips looked OK, but I couldn't avoid bare brass spots being rubbed off after lightly wiping them down with a dry cloth.  I'm pretty sure I didn't clean the brass well enough beforehand.  After being left frustrated by that, I just went ahead and followed what Chuck had done on his, and painted them black and used a rust brown weathering powder to give them that iron look.  I'm happy with the results.  A trick I learned years ago as a model railroader with brass, is to bake the brass after painting.  Just put the parts under a hot halogen or incandescence light bulb, about an inch away from the bulb, for about five minutes.  This hardens the paint on the metal surface and makes it much more scuff resistant.  The nails themselves I ordered from ModelExpo (being my first ship build I didn't have any extras from prior builds to use).  They are the smallest ones they offer.  They're slightly rounded on the bottom of the heads, so don't appear the sit flush when pushed in.  So I used a larger diameter drill bit than the holes in the brass were drilled with, and counter sunk all the holes in the backstay and chain plates.  I also ran a sharp angled file on the underside of the heads of each nail.  This helped get the nails to snug down flat when pushed in.  After getting the parts mounted and nailed in place, I went ahead and touched up the paint and weathering powder.
 
Of all the processes involved on this build, metal working is probably the one I have the least experience in.  The backstay plates and chain plates have taken a lot longer than I thought they would.  That said, I've learned a lot, even with the error part of Trial and Error being frustrating at times!
 
Erik

Fred,  Thanks for the compliment!  The build is definitely coming along nicely.  As a bit of a perfectionist, I know I'm my own worst critic.  That is definitely both a good and a bad trait at the same time!  Haha.
 
Erik 

Fred,  Thanks for the compliment!  The build is definitely coming along nicely.  As a bit of a perfectionist, I know I'm my own worst critic.  That is definitely both a good and a bad trait at the same time!  Haha.
 
Erik 

Continuation: Equipment of the mizzen topgallant yard – Vergue de perruche 
After a short creative break, we continue with the equipment of the mizzen topgallant yard. The equipment and rigging elements basically correspond to those of the fore topgallant yard, but again with correspondingly smaller dimensions. The mizzen topgallant tye is also equipped with a hook. At around 4 mm long, this is even smaller than the hook for the tye of the fore topgallant yard. Of course, the eye splice couldn't be missing either. With a rope with a diameter of 0.35 mm (2x3 Japanese silk thread - rope in the original ø 17 mm) this is a difficult matter, but after some practice it is definitely doable. It just looks better and corresponds to the original design.
As already described several times, I use an injection needle as a hollow spike for splicing, with a diameter of 0.8 mm for the thin ropes.

 
In the next picture you can see the mizzen topgallant tye with the double strop and the thimble already tied on to guide the simple clueline.

 
Sequel follows …

Fred,  Thanks for the compliment!  The build is definitely coming along nicely.  As a bit of a perfectionist, I know I'm my own worst critic.  That is definitely both a good and a bad trait at the same time!  Haha.
 
Erik 

After pulling some hair out, and the remainder going gray, haha, I have finished the backstay plates and chain plates . . . on the port side anyway.  I revisited blackening them, using advice here and on the internet.  My test brass strips looked OK, but I couldn't avoid bare brass spots being rubbed off after lightly wiping them down with a dry cloth.  I'm pretty sure I didn't clean the brass well enough beforehand.  After being left frustrated by that, I just went ahead and followed what Chuck had done on his, and painted them black and used a rust brown weathering powder to give them that iron look.  I'm happy with the results.  A trick I learned years ago as a model railroader with brass, is to bake the brass after painting.  Just put the parts under a hot halogen or incandescence light bulb, about an inch away from the bulb, for about five minutes.  This hardens the paint on the metal surface and makes it much more scuff resistant.  The nails themselves I ordered from ModelExpo (being my first ship build I didn't have any extras from prior builds to use).  They are the smallest ones they offer.  They're slightly rounded on the bottom of the heads, so don't appear the sit flush when pushed in.  So I used a larger diameter drill bit than the holes in the brass were drilled with, and counter sunk all the holes in the backstay and chain plates.  I also ran a sharp angled file on the underside of the heads of each nail.  This helped get the nails to snug down flat when pushed in.  After getting the parts mounted and nailed in place, I went ahead and touched up the paint and weathering powder.
 
Of all the processes involved on this build, metal working is probably the one I have the least experience in.  The backstay plates and chain plates have taken a lot longer than I thought they would.  That said, I've learned a lot, even with the error part of Trial and Error being frustrating at times!
 
Erik

Fred,  Thanks for the compliment!  The build is definitely coming along nicely.  As a bit of a perfectionist, I know I'm my own worst critic.  That is definitely both a good and a bad trait at the same time!  Haha.
 
Erik 

Fred,  Thanks for the compliment!  The build is definitely coming along nicely.  As a bit of a perfectionist, I know I'm my own worst critic.  That is definitely both a good and a bad trait at the same time!  Haha.
 
Erik