donrobinson

Well it's been a month and I don't have much to show for it. Thanks to all for stopping in, for your likes and great comments. I bought an android box for my TV and have been wasting too much time watching that, great device but be careful!!. Here are some pictures of what little I have accomplished:
These are the completed demizanas and their rack
 

 
This is a before and after shot of the pedestals for the new stand I built. These are some sort of pistons that my favourite son-in-law(my only one) gave to me. I just turned them on the lathe to clean them up and size them, nothing to technical here.
 

Milling the slot for the keel, this is a piece of rosewood
 

This is all the pieces, the base is cherry. I drilled out the brass pedestals and epoxied some 1/8" brass pins in
 

And here it is assembled with four coats of poly. The brass pedestals were given two coats of spray lacquer 
 

These two pictures are showing the railing installed and the demizanas/rack installed
 

Here is a shot of one of the supporting posts down in the hold, complete with dust. lol
 

And this is how she looks this morning
 
Next up are some breast plates(I think that's what they are called) at the bow and stern then a top rail at the stern. Sorry no bow shots, there is some re-contruction going on that I am really not too proud of
Thanks for stopping in and enjoy your day

Thanks Ian, the crew was very happy to see them all come on board(6 large and 6 small), so I'm guessing it is something more than olive oil inside them  

Good Morning All, Thanks to all who have visited, for the likes and the gracious comments. Much appreciated.
 Not a heck of a lot going on but having fun doing it, just a few pictures showing what';s going on:
 
The windless with it's poles(is there a proper name for these?)

 
The next few pictures are showing the process I used to make some demizanas

 
 
This one is showing the tools I used

 
This is showing what I have been mainly busy at this week, making shooter glasses. Normally I wouldn't show this but being we are drinking rum out of these so I thought it was a little nautical. It is a 60th birthday party with a Jamaican theme, hence the colors and Appeltons rum.
 

 
Here is the final demizanas, the small one still needs some refinement. They are about 30 and 10 mm tall.
 

 
And to end with, I have the port side deck rail installed and the top timbers re-installed. Now onto the starboard side
 

 
Thanks again for stopping in and have a Good One

Good Morning All, Thanks to everyone for stopping in, for your likes and comments. This a new one for me, two updates in a week, but without my vehicle(another story) shipyard time has increased. I have completed the back rails which I will show in my next post as they aren't attached yet and will complete the breast hooks today as Mike is on edge waiting to see them. For now I have nailed the companion way and made some cleats from rosewood.
 

Here I am showing how I mask it to try and get a relatively straight line.
 

Here are a couple of shots showing holes drilled and nails in place. I used .4 mm nylon fishing line. First side I cut these off using flush cutters then sanded smooth, this side I used a sharp blade to cut off then sanded. The blade worked much better and very little sanding was required, just enough to remove excess glue. Should be noted the companion way had several coats of poly on it to prevent any stains from the ca glue.
 

 Here are the results, I think the .4 mm fishing line is the right scale and looks good. With a little more practice I may do a deck someday. I also found some light brown .3 mm fishing line that I may do a test section on my Pegasus with. 
 

Here I'm just showing the steps of making cleats. As you can see they are fairly large about 10 mm so they were fairly easy to make, that's one of the beauties of working at this scale.  The first one is after rough shaping on the Byrnes disc sander and the middle one is after some fine tuning with riffler file the cleat on the right is the kit supplied one. I would not normally spend twenty minutes making a cleat but I only need two so I thought what the heck. As you can see I have two extra ones that I am willing to offer to members here before I list them on ebay 
 

Here I'm rough shaping it on the disc sander.The thing off to the right in the picture is a crepe block used to clean the sanding disc, this helps prolong the life of your disc or belt if you have a thickness sander. You can get these at Lee Valley they are cheap and last forever.
 Thanks once more for stopping in and have a good one.
 

Nice work Jack, it's almost sad to see all that beautiful framing being hid

Hi Jack, congratulations on your new build and I know you will enjoy it. Having watched your last build I have no reason to believe you will have any problem making this a beautiful boat.
 Having some experience, but far from an expert, with these kits my best piece of advice is to follow the plans very closely. Unlike many others these are very precise and by all means take your measurements from them. Look very close at them, a problem I keep having, and you will find all the information you will need.
 The instructions are a little vague at times and hard to understand( I am finding it is getting easier as I go along) but what they lack the plans make up for. If you do have problems give Zoran a email, he is a great guy and has always come through for me and most times the same day.
 It is my understanding that they are in the process of re-writing all of their instructions for their kits so they may very well appreciate your help in re-writing these.
 In the meantime enjoy your build and I will gladly follow along.

Good Morning All, Thanks to everyone for stopping in, for your likes and comments. This a new one for me, two updates in a week, but without my vehicle(another story) shipyard time has increased. I have completed the back rails which I will show in my next post as they aren't attached yet and will complete the breast hooks today as Mike is on edge waiting to see them. For now I have nailed the companion way and made some cleats from rosewood.
 

Here I am showing how I mask it to try and get a relatively straight line.
 

Here are a couple of shots showing holes drilled and nails in place. I used .4 mm nylon fishing line. First side I cut these off using flush cutters then sanded smooth, this side I used a sharp blade to cut off then sanded. The blade worked much better and very little sanding was required, just enough to remove excess glue. Should be noted the companion way had several coats of poly on it to prevent any stains from the ca glue.
 

 Here are the results, I think the .4 mm fishing line is the right scale and looks good. With a little more practice I may do a deck someday. I also found some light brown .3 mm fishing line that I may do a test section on my Pegasus with. 
 

Here I'm just showing the steps of making cleats. As you can see they are fairly large about 10 mm so they were fairly easy to make, that's one of the beauties of working at this scale.  The first one is after rough shaping on the Byrnes disc sander and the middle one is after some fine tuning with riffler file the cleat on the right is the kit supplied one. I would not normally spend twenty minutes making a cleat but I only need two so I thought what the heck. As you can see I have two extra ones that I am willing to offer to members here before I list them on ebay 
 

Here I'm rough shaping it on the disc sander.The thing off to the right in the picture is a crepe block used to clean the sanding disc, this helps prolong the life of your disc or belt if you have a thickness sander. You can get these at Lee Valley they are cheap and last forever.
 Thanks once more for stopping in and have a good one.
 

Nice work, I sure like the colour of that red on the railings

Looking good E.J., she certainly is a big one

She is quite the tug Mike, I'd enjoy seeing her run around the lake too. If are thinking about planking Titebond III is completely waterproof and would be much easier to use. 

She is quite the tug Mike, I'd enjoy seeing her run around the lake too. If are thinking about planking Titebond III is completely waterproof and would be much easier to use. 

Good Morning All, Thanks to everyone for stopping in, for your likes and comments. This a new one for me, two updates in a week, but without my vehicle(another story) shipyard time has increased. I have completed the back rails which I will show in my next post as they aren't attached yet and will complete the breast hooks today as Mike is on edge waiting to see them. For now I have nailed the companion way and made some cleats from rosewood.
 

Here I am showing how I mask it to try and get a relatively straight line.
 

Here are a couple of shots showing holes drilled and nails in place. I used .4 mm nylon fishing line. First side I cut these off using flush cutters then sanded smooth, this side I used a sharp blade to cut off then sanded. The blade worked much better and very little sanding was required, just enough to remove excess glue. Should be noted the companion way had several coats of poly on it to prevent any stains from the ca glue.
 

 Here are the results, I think the .4 mm fishing line is the right scale and looks good. With a little more practice I may do a deck someday. I also found some light brown .3 mm fishing line that I may do a test section on my Pegasus with. 
 

Here I'm just showing the steps of making cleats. As you can see they are fairly large about 10 mm so they were fairly easy to make, that's one of the beauties of working at this scale.  The first one is after rough shaping on the Byrnes disc sander and the middle one is after some fine tuning with riffler file the cleat on the right is the kit supplied one. I would not normally spend twenty minutes making a cleat but I only need two so I thought what the heck. As you can see I have two extra ones that I am willing to offer to members here before I list them on ebay 
 

Here I'm rough shaping it on the disc sander.The thing off to the right in the picture is a crepe block used to clean the sanding disc, this helps prolong the life of your disc or belt if you have a thickness sander. You can get these at Lee Valley they are cheap and last forever.
 Thanks once more for stopping in and have a good one.
 

Well it's been a month and I don't have much to show for it. Thanks to all for stopping in, for your likes and great comments. I bought an android box for my TV and have been wasting too much time watching that, great device but be careful!!. Here are some pictures of what little I have accomplished:
These are the completed demizanas and their rack
 

 
This is a before and after shot of the pedestals for the new stand I built. These are some sort of pistons that my favourite son-in-law(my only one) gave to me. I just turned them on the lathe to clean them up and size them, nothing to technical here.
 

Milling the slot for the keel, this is a piece of rosewood
 

This is all the pieces, the base is cherry. I drilled out the brass pedestals and epoxied some 1/8" brass pins in
 

And here it is assembled with four coats of poly. The brass pedestals were given two coats of spray lacquer 
 

These two pictures are showing the railing installed and the demizanas/rack installed
 

Here is a shot of one of the supporting posts down in the hold, complete with dust. lol
 

And this is how she looks this morning
 
Next up are some breast plates(I think that's what they are called) at the bow and stern then a top rail at the stern. Sorry no bow shots, there is some re-contruction going on that I am really not too proud of
Thanks for stopping in and enjoy your day

Looking good E.J., she certainly is a big one

nice work on the planking

Good to see you back Keith. Looking forward to seeing more updates

Good Morning All, Thanks to everyone for stopping in, for your likes and comments. This a new one for me, two updates in a week, but without my vehicle(another story) shipyard time has increased. I have completed the back rails which I will show in my next post as they aren't attached yet and will complete the breast hooks today as Mike is on edge waiting to see them. For now I have nailed the companion way and made some cleats from rosewood.
 

Here I am showing how I mask it to try and get a relatively straight line.
 

Here are a couple of shots showing holes drilled and nails in place. I used .4 mm nylon fishing line. First side I cut these off using flush cutters then sanded smooth, this side I used a sharp blade to cut off then sanded. The blade worked much better and very little sanding was required, just enough to remove excess glue. Should be noted the companion way had several coats of poly on it to prevent any stains from the ca glue.
 

 Here are the results, I think the .4 mm fishing line is the right scale and looks good. With a little more practice I may do a deck someday. I also found some light brown .3 mm fishing line that I may do a test section on my Pegasus with. 
 

Here I'm just showing the steps of making cleats. As you can see they are fairly large about 10 mm so they were fairly easy to make, that's one of the beauties of working at this scale.  The first one is after rough shaping on the Byrnes disc sander and the middle one is after some fine tuning with riffler file the cleat on the right is the kit supplied one. I would not normally spend twenty minutes making a cleat but I only need two so I thought what the heck. As you can see I have two extra ones that I am willing to offer to members here before I list them on ebay 
 

Here I'm rough shaping it on the disc sander.The thing off to the right in the picture is a crepe block used to clean the sanding disc, this helps prolong the life of your disc or belt if you have a thickness sander. You can get these at Lee Valley they are cheap and last forever.
 Thanks once more for stopping in and have a good one.
 

looks good, what type of planking are you thinking of using?

Nice work, I sure like the colour of that red on the railings

I agree with E.J., either natural or stain.

looks good, what type of planking are you thinking of using?

I fell behind on your build, Wow, have you got lots done. Very nice work

Amazing work Sjors, a very beautiful ship she is!!

Nice work Jack, it's almost sad to see all that beautiful framing being hid

That's looking like a real nice start