bruce d
-
Posts
2,995 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by bruce d
-
OK, found the smoking gun. First, my mistake, I should have said '10 pages earlier' you will find the jolly boat. My pages are: 277, jolly boat away for Ellis overboard; 287, hoisted in the launch and cutter; and 346, '...the cutter and launch began watering at once [while] the jolly -boat carried the purser ashore...'. This last entry is three pages before Mowett's song '___ old Harte, ____ old Harte'. Page 356 again mentions all three boats. HTH, Bruce- 320 replies
-
- 2
-
-
- Sophie
- Vanguard Models
- (and 1 more)
-
Found on page 287 of my paperback that 'the launch and the cutter' pulled Sophie when becalmed. EDIT: A couple of pages later 'the jolly boat' is launched to rescue a man in the water. HTH, Bruce
- 320 replies
-
- 4
-
-
- Sophie
- Vanguard Models
- (and 1 more)
-
Very sad news, I am sure everyone here will respect their wishes. Please, when appropriate, send our sympathy.
-
Your points about irregular shapes are of course right but a self-centring 4x jaw chuck is very useful for square (and rectangular) stock. It is also good for any round stock and some say it has an advantage for holding round stock of softer materials because it spreads the load across four contact points instead of three.
-
Oliver, good luck with your search. There is one further detail that hasn't been addressed and is important. The thread diameter is M16 but what is the pitch? For example, the Unimat range of lathes use M12x1or M14x1 for their chucks instead of the common M12x1.5 or M14x1.5 pitch used by common bolts, some Sherline lathes have M12x1 but most are M12x1.25, and so on. Forgive me if you already know this but the pitch of the thread must be established as mistakes can be expensive when ordering machine tools. Hope this helps, Bruce
-
Simon, Welcome to MSW from Sussex.
-
I wish. Try the early 60's. I think the frame of mine was a bit iffy way back then and they don't 'heal' with time.
-
I bought one a few years ago and was shocked when a plastic chuck arrived: sent it back and bluntly told them to add that detail to the description. Having said that, it probably has a use somewhere, just not in my shop. They are currently available on Ebay in the UK for £22.
-
The brightest yellow I could find!
-
Great kit, a raunchy looking '32 Ford. I bashed mine ( a loooooong time ago) as a Bonneville racer by simply changing the tires and a couple of simple mods. Looking forward to this one!
-
Welcome to MSW from the UK.
-
Watch this space. 🤐
-
Spoiler alert: I recently got a BÖHLER saw which features a tilting blade. It seems solid and well built. So far I have only turned it on to see it works but once it passes the tests I will comment. It has potential.
-
Agreed, that's not cheap and I suppose that is the price in the Proxxon catalogue. However, replacements are on ebay for €36 and as Wefalk pointed out it is basically a sewing machine motor: they are even cheaper. The FET is a serious saw for modelling and the KS230 is a lower spec tool for an entirely different budget.
-
It's a lightweight motor and easy to overload. But it's also easy and cheap to replace the motor. The Proxxon saws are good tools for their intended jobs. I sold mine when I got a Byrnes and, as has been said before, the Byrnes is Number 1 but the Proxxon is pretty good.
-
Hello Ian and welcome from Sussex. This thread should help: Hope this helps, look forward to seeing your pictures. Bruce
-
Well done, that's a very impressive model. Simply gorgeous.
- 510 replies
-
- 1
-
-
- reale de france
- corel
- (and 1 more)
-
Using a card-kit to ¨scratchbuild¨ a ship?
bruce d replied to ubjs's topic in RC Kits & Scratch building
The Society of Model Shipwrights has a video online discussing making a wooden model from a paper kit: -
Found it. I've been looking for this one-page article in MODEL CAR SCIENCE from 1963 on building the Tony Nancy roadster from available parts, guess Revell didn't confide in them about upcoming releases! Anyway, it's got a pretty good picture of the real thing.
-
This painting is the best source for correct information about the appearance of Pickle. Dodd painted the battle with the guidance of Lt Lapenotiere who was in command of Pickle at the battle.
-
I can jump in here with the results of a LOT of digging a few years ago: Pickle never had her lines taken off. All models are 'best guesses' and Adonis is my 'best guess' as to the source of the Caldercraft kit. The good news is that there is a very well researched book that untangles the confusion arising from there being two craft of the same name on the books at the same time and gives a good account of Pickle and her captain, Lt. Lapenotiere. I tried and failed to find fault with his research and conclusions (me failing to find fault is uncommon... sigh.) HMS Pickle: The Swiftest Ship in Nelson's Trafalgar Fleet by Peter Hore, published by The History Press.
-
Me again. It is interesting that the term seems to refer to a specific pattern in some examples. In coachbuilding (see my comment in post #2) it covered the practice of painting a panel or area with a pattern/motif. The text below is closer to this usage. HTH
-
EMCO commissioned Gerald to write a book on using the Unimat. He was a good advocate for the lathe and accessories and was brutally honest when discussing them. I heard that Elliott either merged or was taken over but don't know the story.
-
Next to last paragraph. This definition is new to me. flother.pdf
Our Emblem ®
