Jump to content
NRG Photographic Model Ship Competition - All eligible to enter - Reduced memberhsip fee - JULY 31 ENTRY DEADLINE ×

flying_dutchman2

Members
 View Profile  See their activity

  • Posts

    1,734

  • Joined

  • Last visited

 Content Type 

Everything posted by flying_dutchman2

  1. flying_dutchman2
    Faired the hull and did the final sanding. Made a radical decision by removing everything at deck height. Once the deck is in place will glue the finished pavilion on the deck as well as the sides.
  2. flying_dutchman2
    Hartmut, I went through your complete built and she is beautiful. With the scale you are building her you can add lots of details. I will leave some of those details out with my scale. You mentioned the colors you used on her in the beginning of your built but later on you omitted that. I like the colors you used compared to what others builders have used on their jachts. Is it possible to list them here and what color you used for what part of the ship? I would like to use these colors on my jacht. Thanks in advance. Marcus
  3. flying_dutchman2
    Hans, That is one awesome looking model. Excellent details as well. You are doing a great job putting in all the details. I have this book from Blom as well. It is a very detailed book with lots of diagrams. This is something I might build in about 10 years from now. Marcus
  4. flying_dutchman2
    Finished the sanding the hull. Created templates for both the top of the deck and the top rail using the thick vinyl backing I salvaged from the old Samsung TV. That material sure comes in handy. Throughout this build I have been making lots of templates by xeroxing items from the plans and glueing them on the vinyl.
  5. flying_dutchman2
    Kees, Thanks for the info, I will be extra careful. Marcus
  6. flying_dutchman2
    Another find were these drill bits (also from the deceased neighbor). What I like is that the piece (shank?) you put in the collete from the dremel all measure at 3mm diameter. Also all the bits are numbered. The higher the number, the thicker the bit.
  7. flying_dutchman2
    Have also been working on deck items, rudder and leeboards.
  8. flying_dutchman2
    Worked on the Stern. Sanding the angle of the back (spiegel). Created a gunport template and cut away the area where the final piece goes. I am thinking of using the template for this as it is hidden, so you will not see it.
  9. flying_dutchman2
    Rough sanded the boat and and the lines look pretty good.
  10. flying_dutchman2
    Once I got that and curve was there substituted the card for pieces of wood. This was a long process but it worked. Glued the bow to the frame and voila, I had it. Added some putty and a bit of sanding and I am really pleased with it.
  11. flying_dutchman2
    Besides being outside most of the time, I have been working on the boat. I had a terrible time constructing the bow. Tried everything, but couldn't get the curve just right. Tried blocks and sanding them. Tried clay, no good. So I worked with card. Copied the last frame onto card and drew horizontal lines every 5 mm. Made a template from the stem and glued that on a piece of wood. Fitted the deck layer to the stem and left the rest empty. Cut the first layer out from card and fitted that between the stem and the frame. Kept cutting away with scissors until it fit. Did that with all of the layers.
  12. flying_dutchman2
    Oh, that was you waiving. Couldn't stop as I was keeping up with the car in front of me. Europeans like to drive fast. Marcus
  13. flying_dutchman2
    Vacation was great and got lots of pictures especially from the maritime museums. Sorting out well over 3000 pictures of 6 ship museums and will show the highlights starting with a new thread. The following is a picture of the micro carving tools I purchased from my neighbor ($100). Bottom right are custom made carving tools. He made his own. So with some of the blanks, I can create some myself. He died last year and his wife is selling all his stuff. He was a watch maker and hoarder. He had 4 large Tupperware boxes full of watches some working most of them not and he collected face plates, all neatly put in envelopes in alphabetical order, thousands. He has an itty-bitty drill press and lathe from Germany. If she can't sell them, I'll make her an offer. Still need to look over the rest of it. Working on the Utrecht again. I am working on my carving skills with clay and plaster of paris. Also doing some deck items. Those carving tools sure come in handy. Marcus
  14. flying_dutchman2
    What's in a name and vacantie is a Dutch thing. I may live in the US but I always take vacation. I work to live. Not live to work. Marcus
  15. flying_dutchman2
    First 2 are pob version the last 2 are pof version. The yellow stuff is a combination of yellow glue and saw dust. Fills the holes and in some areas thickens the frames. This will be sanded. Marcus
  16. flying_dutchman2
    I know it's a lot of driving but this is the way we always do it in Europe. With a car we always see more.
  17. flying_dutchman2
    I am from Amsterdam and visited both the Rijks and maritime museums after their renovations. Took lots of pictures as well. Uploaded them on msw. Search museum. My mother used to live in Amsterdam, but has moved to Heerhugowaard. I need a car for visiting her and staying with friends. I know it's a lot of driving but this is the way we always do it in Europe. With a car we always see more. June in the north? More daylight, especially Iceland, can't wait. I remember when my dad worked in Helsinki and I would go on vacation in June. I would see the sun go down in the west and come up in the east all at the same time. One last thing about driving. Where we live in the US, distances are minimal. Big country. Want to go somewhere? Expect to drive between an hour or two. The Midwest is vast. Chicago is an hour drive from my house, without traffic. Marcus
  18. flying_dutchman2
    Continued. Helsinki to Porvo. Drive to the Russian border, take some pictures and not get arrested. While in Helsinki take a day trip to Estonia. Fly back to Iceland and then to the US.
  19. flying_dutchman2
    I felt guilty. So today was cloudy and colder. Worked on the POF and glued it all together. Made template from the deck to see if the boat is correct in length, and it is. The POB is the correct length as well. Pictures will follow. I find scratch building tough. There is a lot of guess work especially the details such as the deck items. Some of the plans are two dimensional. I have been looking at other books on flat bottom boats and it does help. I am writing this from my phone and sitting next to the BBQ where I have a leg of lamb on the rotisserie. Smells good. Three weeks in June my wife and I will be going to Europe. Chicago to Iceland (nice viking museum). Iceland to Amsterdam. Rent car. Drive to Hamburg to FLensburg to Copenhagen (another viking museum). Copenhagen to Oslo on ferry. Oslo to Stockholm (wasa museum). Stockholm to Turku-Finland. Helsinki to orvo
  20. flying_dutchman2
    I am not building much on the Utrecht as the weather has been great here and I fried my pc, so I have to use my wife's pc to upload pictures. I overclocked mine to the max...... Oops. Marcus
  21. flying_dutchman2
    The POF version of the boat. All the frames in a large clamp. Left over frames that were either cut to the wrong size or are double. For the bow of the POF I will do the same as the POB, which will be a solid piece of wood shaped to size and covered with planking.
  22. flying_dutchman2
    As mentioned before I am doing both a POB and a POF. I find that a POB is easier than a POF. Less frames to line up. I have been looking at another Jacht and the lines from the Utrecht are similar, so I will turn the POB in that one. Different carvings. POB frames in a jig. Template for the bow. I plan to use a block of basswood, which will be shaped according to size.
  23. flying_dutchman2
    There are many Dutch books on VOC (Dutch East Indies Co.) history that have diaries of sailors and ship captains of day to day events such as explorations and shipwrecks. I know most of the members do not read Dutch. Some books have been translated in English and in German. Batavia by Peter Fitzsimons is a very thorough historical event of the shipwreck on the Australian Coast. There is a very good book about the events of the HMS Bounty by a female author. (best book I have read about the Bounty) Several Dutch and English books have been written about Abel Tasman and Willem Barentsz. Last but not least much has been written about the VOC in books, PhD thesis's and just general long detailed articles. Most of these reads are on various websites and free for downloading. I know that the above is specific towards Dutch history and not everyone is interested in that. Marcus
  24. flying_dutchman2
    One word...... AWESOME!!
  25. flying_dutchman2
    You did a great job on this ship with many details. I like the way you explain everything in the 'Show and Tell' session in our club meeting. Marcus

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...