Jump to content
New Publication - Ship Modeler's Handbook ×

flying_dutchman2

Members
 View Profile  See their activity

  • Posts

    1,730

  • Joined

  • Last visited

 Content Type 

Everything posted by flying_dutchman2

  1. flying_dutchman2
    SCREW-UP I put a light coat of polyurethane on the paint and it dried blemished. Then tried the touch ups and that went wrong. So as I mentioned before, stripped the boat of all the trim and hardware and about an hour ago spray painted the first coat. On this picture you can see it good. Ready for painting. What did I learn? Once paint is completed NO polyurethane except the wood work. Redoing the hardware and the trim will be easy as I have done this already. The display stand is ready. The items that still need to be made is a name plate with the word 'perseverance' and a burgee with the Prince Edward Island crest. Marcus
  2. flying_dutchman2
    Finished mast hoops. Sail marked with light pencil. Sail completed but not attached to mast, boom and gaff. Dry fit. Boomer the cat in the box. Not on the warm mat next to it, no, in the cold box.
  3. flying_dutchman2
    When the trim was all done. Very happy with the results. The cabin windows get trim as well made from the same material as the mast hoops. Used a window cut-out as form. Wrapped the wet canning around the form. Held it in place with a large clamp and the ends that cross over each other with a hemostat.
  4. flying_dutchman2
    I made a colossal mistake @#$Getverderrie%^&* I yelled all the Dutch swear words I knew...........................Didn't trash the boat. I was touching up some paint and a piece of paper towel ended up sticking to the paint. Took it off and left the threads on the deck. Tried to take that off and it left scratch marks. Tried to sand that off and sanded some of the trim and it got worse and worse (Always does) AAARRRRGGGGHHHHHHHHHHHHHHHHH So I stripped the boat of all its trim, and hardware, sanded it down, covered the left over trim with tape and masked the bottom and keel (rust red). Now it is ready for a RE-DO paint job. I did take pictures. Didn't want to as I want to forget this, but it needs to be learned. Runs of in a corner and cries.
  5. flying_dutchman2
    This document needs to be pinned somewhere on this site as it is very useful. Marcus
  6. flying_dutchman2
    I received the table saw from Micro Mark for Christmas and I am very pleased with it. I am looking for the download of Jeff's (Hobbymill) saw operation pdf guide. Does anyone have it or give me a link to it? I've done some different Google searches but nothing comes up. Mark Taylor suggested that I should look at the blades from Thurston (which I will do). Thank you. Marcus
  7. flying_dutchman2
    WOW, Will get a few of these for both my Bonsai and ship building. Marcus
  8. flying_dutchman2
    The German Nautical Journal, 'Das Logbuch' has a very detailed article on carving a ship's stern. Even if you don't read German, the detailed pictures are worth a look. Several pictures show what tools are used for the type of carving. If you mouse over the pictures you can click on them to enlarge them. http://www.arbeitskreis-historischer-schiffbau.de/mitglieder/themen/schnitzkurs-1/ Marcus
  9. flying_dutchman2
    Also check Youtube for Sharpening blades, lots of info Marc
  10. flying_dutchman2
    I bought the same book (Complete Guide to WoodCarving) Jack12477 mentioned in one of his posts. Learned a lot from that one. Also have Bill Shorts book. Knives? Use a variety of tools for different projects. Blade #11 for tiny items and also surgical knives I have left over from grad school. Chisels for larger items. Bench hook is an important tool and very handy. Kevlar tape around my fingers. I will show my project in the next few days. I am carving the VOC emblem from the Dutch East Indies. Also practicing figures for the Staten Jacht - Utrecht. Marcus
  11. flying_dutchman2
    The close up of the bow. There are three blocks attached to the deck (as it is on the real boat). On the kit there are eyelets made on the mast itself. That is one of the big differences in each of the design. I need to sharpen my sewing machine skills, so I can make the sail. Finish up the rigging, make the stand, get a display case, pack it and FedEx it to my sister. Marcus
  12. flying_dutchman2
    Re-did the hoops. First went to Hobby Lobby and looked for chair canning. They had none. Came home and looked in the parrot cage and one of her toys is made of chair canning. Removed it, took out all the treats and she was happy. I don't think she is going to miss this. Pulled the toy apart and put in bowl of water overnight. Removed the pliable canning and wrapped it around the metal cylinder (HP printer item). Tapped both ends and let the canning dry for a couple of days. Removed the tape and took the canning off the cylinder. On the left the canning wrapped and tapped to the cylinder. In the middle, cutting hoops. On the right, after gluing the ends with a drop of CA, sand it to thickness. Lots of hoops, very few good ones. Also I had a lot of colored ones as the canning for the parrot toy is dyed with different colors. I picked all the none dyed pieces, glued, sanded and stained them brown. These are the hoops. Only glued. I need single and double blocks, As I don't have single, but do have double and triple hole blocks, I cut the triple hole block in half and after a bit of sanding, one has two single hole blocks. Mast. Boom and gaff have all there blocks and attachments ready. Marcus
  13. flying_dutchman2
    I am using the below picture as a guide of how my sisters Catboat looks like. It is very different from what the kit looks like. More trim. On the real boat, the bow has a metal strip attached, where as the model just has a pin in the bow.
  14. flying_dutchman2
    Have been doing lots of small things to finish up the boat. First of all, being a bit careless, I broke the bottom area of the rudder. Removed it and replaced it with another piece of wood. Painted it, but did not look right, so I pulled off all the hardware and will start from scratch. Next, finished up the trim work all around the boat. Added an open cabin door, (so you can see inside with a flash light).
  15. flying_dutchman2
    Kees, Thanks. It is the mast in the back that got me confused. I do have several books in pdf form on flat and round boats. I know the name Petrejus and I think I can find something from him on Google. Another book I have 'Vlaamse Visserij en Vissersvaartuigen' book 2, by Gaston Desnerck, 1976, bought it a long time ago in Amsterdam at the book store 'de Slechte'. I paid 30 guilders for it and looked it up recently and it is now 330.00 Euros. I am missing Book 1., but I am not going to pay 330.00 Euros for that one. While I am on the subject there is a freebee floating around from before 1895-1905 called Ship Building from its beginnings by Emile van Konijnenburg, It is in 3 parts and in English. Nice plans, good descriptions and many boats and last but not least several German books on these types of boats. The Germans have written much on this subject. For the none Dutch people here; The Dutch had numerous types of flat and round bottom boats. Every town that has a wharf has a many types of these boats. For pleasure, for freight, passengers, etc. Several years ago I started writing an article on this for the Nautical Journal. It got huge as I was describing every boat possible with no end in sight. So I put it away. I can split it up in sections. Sorry for hijacking the thread......................... back to you.... Kees. Marcus
  16. flying_dutchman2
    Kees; Looking good. Question: in one of the pictures you have a large scale flat bottom boat (plat bodem KW 17), is that a haring buis? What scale is it? Kit or Scratch? Thanks, Marcus
  17. flying_dutchman2
    Ian; Cute little boat. I like it. So I am pulling up a chair and observe. You are coming along very well. Marcus
  18. flying_dutchman2
    After the conference and a road trip (1200 mls) up the Pacific Highway and lets not forget a day in Tijuana, Mexico I am have been working on her again. This picture shows items I used and what I did with them. I have made small nails out of them. I didn't have any. Piercing holes with a dental drill. Forming the trim after soaking. Trim attached and waiting to be dried.
  19. flying_dutchman2
    Pulling up a seat as well. Excellent choice for a build, such a majestic ship. Marc
  20. flying_dutchman2
    Prepped and painted the bottom - rust red. Came out pretty good. She is on a makeshift stand. I have already sanded the mast, boom and gaff according to size. They will all be painted white. Made some of the cleats and so on. The stern is covered with a piece of cherry veneer (donated by Kurt van Dahm). Marcus
  21. flying_dutchman2
    I know, I am late pulling up a chair to this build. WOW, Looking very good. The real one looks as good as the model. You are doing an excellent job in building her. Marcus
  22. flying_dutchman2
    Before anyone tries the hoop thing I have to go back to the drawing board as some of the strips of paper glued onto the rod and then heated do not come off. Marcus
  23. flying_dutchman2
    I am done painting-sanding-spackling. I have also removed the tape from the windows and the walnut veneer. Here I am prepping the boat for a rust red bottom and have marked the rudder with tape. I will first paint the rudder several coats of the same color as the rest of the boat and then the bottom of the rudder will be rust red. I taped the rudder to the benches to keep it straight and then to be able to draw a straight paint line. I taped a little level to a dowel which will go temporarily where the mast goes. Having the stand level on the table and part of the stand where the keel goes into, I can move the boat up and down and keep an eye on the bubble. This is where I need to keep the boat level to draw an accurate paint line. Marcus
  24. flying_dutchman2
    Mike Y, As Yamsterman said; all wood oxidizes over time. Some slowly some fast. Example: If you had a block of Pink Ivory - 5cm x 20cm x 20cm. After about 10 years the outside layers have lost its pink lustre and the wood is light brown almost sand in color. If you sand off 2mm on all 6 sides the block will be light pink again. The more you sand off the darker the pink color. I have done this with walnut but the model I built with this wood has been in a display case for about 4 years and the light in the living room has somewhat faded the wood. If the wood has been properly dried the pink will last. But generally ALL wood fades. UV rays is the enemy of this. Most of this information comes from a book I have on Arboriculture. Marcus
  25. flying_dutchman2
    WOW........AMAZING........ Such detail........ Excellent craftsmanship. I like it. Marc

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...