Jump to content
Supplies of the Ship Modeler's Handbook are running out. Get your copy NOW before they are gone! Click here to order ×

rwiederrich

NRG Member
 View Profile  See their activity

  • Posts

    5,501

  • Joined

  • Last visited

 Content Type 

Everything posted by rwiederrich

  1. rwiederrich
    Thanks so much Kieth . I’m doing everything I know to make them as accurate as possible within the limits of this scale.
  2. rwiederrich
    I also began the first of the backstays lanyards.......and off we go.....
  3. rwiederrich
    Sure..here are some pics of the closest I have of the sails mounted. These little guys are about 1/16" diameter.
  4. rwiederrich
    I make each one singularly.....paint them..then add them to the panel lines of the sails. Rob
  5. rwiederrich
    I appreciate that....I've worked hard to make them as convincing as possible...both in detail as well as billow effect. Rob
  6. rwiederrich
    Thanks Pat....I appreciate that. The stays need to be threaded through the cringles prior to install and that can be problematic...that is why I pre-make the stays with hooks and eyes so I can re-attach them after the stay sail/jib sail is installed. I've got the process all figured out...it just takes a while to perform. Rob
  7. rwiederrich
    What a fine miniature collection Patrick...and with finished interiors to boot....man. What skill to create such tiny nautical wonders....well done. Rob
  8. rwiederrich
    Now I'm going to focus on rigging (alternately) the fore stays and fore backstays along with the final foremast remaining yard halyards. As I get higher up the masts the issue of bending and sagging of stays becomes the real problem. So much pre-thought has to go into the next phase of rigging. Stay sail and jibs sails will need their halyard and downhaul blocks rigged as well...and not too early or late..as to block myself in or out of a situation. Belaying the topgallant downhaul line to its lin aft on the rail between the rail and house was the thing of total frustration. Rob
  9. rwiederrich
    Worked a bit today on the topgallant stay sail. Here are some pics. Rob
  10. rwiederrich
    Thanks.....I'm wrestling with the details...and trying to keep things shipshape. I'm making stuff up as I go....construction details that is... Rob
  11. rwiederrich
    In many instances the sky sail wasn't even set and the yard in its lowered position could be gotten to more easily. Once the sail was bent, the boys on the deck hauled the yard skyward....raising the sail with it. I've seen where the access to these lofty yards was gained by ratlines incorporated into the last two backstays as they capped out. Sailors simply scurried over to them and continued up. Riiiight. IRON MEN...for sure. Rob
  12. rwiederrich
    Thanks everyone for the concern and encouragements. I spent some time this morning working on the top stay sail. I made it as close to realistic as possible in this scale. Here are some pics of the addition. Rob
  13. rwiederrich
    Ed...it appears the downhaul for the stay sail is actually distorting the stay itself....causing it to unduly pull against the main mast and in essence shorten the stay. This could cause mast warping I gather. Rob
  14. rwiederrich
    Fantastic work Ed...really. I'm at adding some main stays myself. How you doing keeping balanced tension between stays and backstays? I was also wondering are you going to add some Jacob's ladders to access the skysails? Rob
  15. rwiederrich
    I have a 6000watt generator so I powered up the freezers and the fridge and also the TV. I was able to get power to the coffee maker and microwave...but nothing else. I also have lots of oil lamps which lit the house and gas stoves. No internet...no hot water...and worse...no exiting the hill drive to/from the house. I'm back to work today after shoveling my way out of the drive. I have a Jeep, but my sweetheart is still stuck and can't get her car out. I do hope to get back to the GR on Saturday....I'll have a few hours then...I hope. We had 18~20 inches....my wife has lived hear her entire life and has never seen this much snow...and it lingering so long. Good day everyone. Rob
  16. rwiederrich
    I’v Been without power since Monday, so I haven’t been able to work on the G/R Lots of snow
  17. rwiederrich
    Unlike the Dremel version the B/D is fully articulated...meaning it can rotate and be adjusted in a vast array of different angles and latitudes. It rolls around on a ball at the base and you can adjust the level and angle. One real reason I prefer it over the Dremel vice. Rob
  18. rwiederrich
    I love it...it is very articulate. They haven't made them for years from what I gather. I use mine in all my model building. Rob
  19. rwiederrich
    Thanks everyone. Yes...I got that table vice over 35 years ago...and it's been a great aid. 28 degrees outside and 18 inches of snow..... Everyone be safe. Rob
  20. rwiederrich
    With the addition of the blocks this yard will be complete. I have 8 inches of snow outside and I have to go get my wife from work....hope to be at it later. Rob
  21. rwiederrich
    With the mast set in the work vice...I added many new eye bolts for lifts, halyard blocks and other blocks connection points. Next, I'll begin adding the yard parrels and straps as I finish up the first yard to be added to the mast, the royal yard. Rob
  22. rwiederrich
    Moving back to the mizzen yards...I finished forming them and prepping them for addition of eye bolts and trusses. Rob
  23. rwiederrich
    While I was planning out the yard details and making more eye bolts...I also finished up the rigging for the top sail yard halyard and its blocks and purchase. Here they are installed and just belayed. Rob
  24. rwiederrich
    I began the work session by first cutting to length the 5 yards for the mizzen mast.
  25. rwiederrich
    I've enjoyed immensely your application of electroforming and fine soldering of your metal joinery on your builds. I think it is amazing that you are not electro plating on another metal..but Forming new copper on electro conductive paint. Makes so much sense in the building of your finely curved and molded parts. Wonderful work indeed. Rob

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...