Jump to content

Tim Moore

Members
 View Profile  See their activity

  • Posts

    347

  • Joined

  • Last visited

 Content Type 

Everything posted by Tim Moore

  1. Tim Moore
    Just an outstanding work of art and craft. Really well done Yves.
  2. Tim Moore
    You’re very welcome. Looking good - nice work on planking. Your building board looks pro.
  3. Tim Moore
    Hi Lyle - it goes under the deck at the stern. See photo 24 in the booklet if you have one. It is misnumbered on the index sheet and is actually part #170. tim
  4. Tim Moore
    Hi Reneke sorry for delay in responding...yes I definitely have a fix having needed to do it myself earlier in this build. Rather than go to all the trouble of sanding and refinishing I just mixed some of my ebony and chestnut stains with the varnish until I got the darker tone I wanted and put on another coat. It worked well.
  5. Tim Moore
    Hi Reneke - thank you for the kind remarks! Hope the rest of the build is satisfying. I’ve been immersed in a couple of building projects for many months so the Bounty has been waiting patiently for me to finish her. I converted our garage into a studio where I could work on ship modeling a few years ago, but my wife’s pottery business has really taken off so she now needs the whole space. I am presently building my own workshop on our property and as soon as it’s done I’ll be back in business. Should be back at work on Bounty before winter In my new space and will resume my log to completion.
  6. Tim Moore
    I purchased the kit after reading your review...it’ll be my next project after I finish the Bounty rigging.
  7. Tim Moore
    here are remaining instructions from the parts list booklet.
  8. Tim Moore
    Hi Geehard - I’m just finishing up an AL Bounty - where are you at & what do you need to know?
  9. Tim Moore
    Hi Yves, yes that is the Billing’s Calypso up there... good eye.
  10. Tim Moore
    Lower foremast yard is hoisted. Messed up the chain (actually rope) length slightly as it’s a complicated loop assembly that had to be pre made. The end result is just that the lanyards between loops are a bit short. I’ll get the mainmast right, decide whether to fix this later.
  11. Tim Moore
    Thanks! I use CA, find it’s very effective tool, faster and less messy if used sparingly. I find the carpenters glue tends to leave more residue but do use that sometimes.
  12. Tim Moore
    Hi. I just use thread. My block tying routine (illustrated below) is: 1. Rub thread with beeswax 2. loop around block and tie knot at bottom 3. stick the block in vice and twirl thread a few times if you need the block to stand off yard or mast. Rub a drop of glue on thread to fix it. 4. tie the open ends of thread around yard or mast, fix with glue and trim
  13. Tim Moore
    The lower yard on the foremast showing scope of all the gear that must be attached. This isn’t quite finished yet, still needs the foot ropes and parrel assembly and some final tidying up.
  14. Tim Moore
    Yes my plan at the moment is to do sails, unless it ends up looking too cluttered.
  15. Tim Moore
    Thanks Patrick and Sam for the kind comments. The first two yards have been hoisted in place, using the parrels and without need for any temporary pinning. Man there is a ton of rigging on this puppy. Ropes everywhere. Nice to have such a great hobby for these strange days.
  16. Tim Moore
    Working on the yards. The hoops for attaching the booms to the lower yards in the kit were unusable, so am fashioning something from slices of aluminium tube, brass wire and a dab of Ca. Should look acceptable all painted up with gunmetal.
  17. Tim Moore
    Thanks Nils - much appreciated coming from an accomplished scratch builder; and likewise to all for the likes. Im currently splicing together pieces of walnut from the remains of old completed kits to make up some of the Bounty spars as there were a few pieces of dowel missing from my kit. Knew I saved all those bits and pieces for a reason.
  18. Tim Moore
    Thanks Mark. Yes been pushing the Bounty onwards, in the groove on completing the rigging. Looking forward to seeing your Victory work when you are able to get back at it.
  19. Tim Moore
    So that’s it for the fixed rigging - next step is the running rigging and sails, so I’ll have to head back to the wood shop, fire up the drill press and finish fashioning all the yards and attachments.
  20. Tim Moore
    Thanks Yves, and everyone for the thumbs. Just about finished diagram 5 of the 21 Bounty rigging plans. Drawings are ok except for a few educated guesses that need to be made, and a few errors in numbering. Made a little more tedious by the fact there was no dark thread provided in the kit except for one small spool of 0.8mm brown that ran out immediately, so I’ve had to stain the natural stuff as I go along. Managed a fairly even taughtness of all the lines so far without any of the back stays in place yet, which is a good sign.
  21. Tim Moore
    Just over 1200 knots later, the Bounty ratlines are all done.
  22. Tim Moore
    Thanks Sam...fixed part of rigging is well on the way to completion, just one more set of upper shrouds and the upper ratlines to go. Good job for a cold February here. My next project just arrived in the post... decided this lovely little fishing boat would be a nice change of pace after the rigours of the big Bounty. I’ll maybe do a build log if no one has done one by the time I start on the Fifie. Looks like a really nice and substantial kit.
  23. Tim Moore
    Thanks Yves...means a lot coming from you... The shrouds are all in now, just starting the ratlines. I’ve tried different techniques, including clove hitches at the ends and at each shroud line. What I find is, it’s more important for final appearance sakes to keep from distorting the shrouds with all the ratlines install finagling - so now I just install a square knot one end and simple loop de loop over each shroud after. I squeeze each junction with tweezers to get the beeswax to hold everything, then a drop of glue. I can do them pretty quickly this way without messing up the shroud alignment. It’s also easier than a lot of knotwork given I only have two functioning fingers to work with. The most critical part of ratlines though is selecting the appropriate brand of scotch to get you through this strangely satisfying but interminable process. I’ve just opened a bottle of Te’ Bheag which seems effective. The bottle label also coincidentally gave me inspiration for my next project, which I ordered from ages of sail last night.
  24. Tim Moore
    Thanks Matt. It is, too bad AL is out of business. The Bounty is a big build to work on, almost a metre long when finished. Overall it’s a nice bit of kit. Ok, I knew there was something off...so third times a charm, now these are.... finally.... proper crows feet I think. Hey, every build can be a bit of a relearning process. Piece of cake once you realize how it’s done.
  25. Tim Moore
    Thanks Mort... I’ll try that. I made a proper job of the second crows feet at the mainmast. After doing it I realized I’d made a hash of the first one on the foremast, so Ive now pulled that mess off and redone it properly. Much better.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...