HOLIDAY DONATION DRIVE - SUPPORT MSW - DO YOUR PART TO KEEP THIS GREAT FORUM GOING! (Only 24 donations so far out of 49,000 members - C'mon guys!)
×
GrandpaPhil
-
Posts
6,059 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Everything posted by GrandpaPhil
-
I made enough rings for all the carriages: The first set of carriages are assembled: The demi-culverin carriages are begun: The culverin carriages are sealed and awaiting painting now.
-
Very cool! Nicely done!
-
Culverin carriages: 120 Eyebolts: I made enough for all of the carriages.
-
I used drywall spackle and Delta Ceramcoat sealer. The Folk Art brand clear primer works just as well. I had a lot of fun building Prince de Neufchatel. It is one of my all time favorite builds.
-
Initial test fit:
-
Here is what the stern of my Prince de Neufchatel looked like:
-
Twenty wheels, cut out and rough assembled: Making banding: Some banding already cut: Twenty wheels, final assembly required: Then all I need is to put these on the gun carriages, make and add eyebolts. Then paint them, and I’ll have my first set of gun carriages!
-
The Alert is looking good, Mustafa! Incredible work!
-
Plastic or Wood models? Your Favorite?
GrandpaPhil replied to Bill97's topic in Modeling tools and Workshop Equipment
I paint my wood models just like I would a plastic kit. -
Amazing work! Congratulations on finishing the rigging!
- 740 replies
-
- 5
-
-
- Tudor
- restoration
- (and 4 more)
-
Very well done!
-
Welcome!
-
I collect too, but my primary fun in model making is the actual making part. Then, my Admiral and I decorate with them when I’m done building them.
-
All carriages have their iron banding, and holes for eyebolts are predrilled: Working on wheels right now: I need a total of 20 wheels, times double thickness, so I need 40 wheel pieces. Then I will make the iron banding for them after I make some axles out of toothpicks. Odds are, you’ll need a borescope to see any of this, but…why not?
-
Plastic or Wood models? Your Favorite?
GrandpaPhil replied to Bill97's topic in Modeling tools and Workshop Equipment
My personal advice is to go for it. You have plenty of woodworking experience already and have built some of the most difficult plastic kits around. I believe that you will be fine. -
I’m making the first set of culverin carriages. I’m ad libbing a little bit because I am using Zu Mondfeld’s drawing which is side on. I put the rear bracing on them because of the eye bolt and iron strapping on the back of the carriage. The guns on the Golden Hinde in London do not have the rear cross brace. However, those guns are a lot smaller than the culverins on the Revenge.
-
I added the highlight coat: Thank you @Thukydides for the reminder. It made quite an improvement. Nicely done on the Dreadnought miniature. In other news I have the sides of the culverin carriages traced, scaled and glued down to card. Pictures will follow when I have something worth showing.
-
Plastic or Wood models? Your Favorite?
GrandpaPhil replied to Bill97's topic in Modeling tools and Workshop Equipment
The Endeavour has a bluff bow. Make sure you use plenty of filler blocks around the bow. I built the Mamoli Endeavour as my second actual ship build and that first layer of planking was challenging for me. -
All cannons are painted: I used wargaming miniature painting techniques to generate the faux metallic look with acrylic craft paints. I have never painted faux metallic bronze before, but it looks mostly like bronze stuff that I have seen before. So, I’m happy with them. Next up will be the carriages. I am going to mount the demi-cannons, canon periers and the sakers on conventional carriages. The culverin type guns will go on the two wheel carriages. The breech loaders will get the block mount shown in Zu Mondfeld’s Historic Ship Models. The two-wheel carriages will come from the same plate. I will trace the four wheel carriages out of the instruction booklet that came with the plans. Everything will be sized and scaled accordingly. After I get all those done, I’ll install the ones I need to preinstall and then get back to covering the hull.
-
The breech loaders are finished: All cannons are finished and just need painting. All of them but the canon periers will be painted with a faux metallic bronze. The canon periers will be painted faux metallic iron. However, they all will start out painted black. The bronze ones will have successively lighter browns layered up and dry-brushed on. The iron ones will have grays layered up and dry-brushed on.
-
First port gun: Using normal paper for the banding worked wonders!
-
Plastic or Wood models? Your Favorite?
GrandpaPhil replied to Bill97's topic in Modeling tools and Workshop Equipment
For myself, I prefer wood or card for wooden ships. For steel vessels, I personally generally prefer plastic or card. Although, I have some interesting books that discuss scratch building steel ships from wood.
Our Emblem ®
