Jump to content
New Publication - Ship Modeler's Handbook - They're back in stock! Thank you for your patience. ×

Dave_E

NRG Member
 View Profile  See their activity

  • Posts

    1,230

  • Joined

  • Last visited

 Content Type 

Everything posted by Dave_E

  1. Dave_E
    You ship is looking very good Sir! Thanks for the clear lacquer tip for the decks, I might do that. I really like your paint collection. Question; how old is some of that paint and how long do you think the shelf life is?
  2. Dave_E
    Guess I’m going to be the only here yet to say “ONE”! 😁 Not to say that after I’m done cutting my teeth on the Lady Nelson I might work on more than 1 build. But right now, every step of my 1st build is a new adventure. 👍
  3. Dave_E
    Good work. What name do we call you? Look at some build logs concerning the squaring of the bulkheads. Many approaches, one will hit you. Intricate building jigs, squares, Lego blocks, clamps etc., something will reach out to you. 😀
  4. Dave_E
    Hola Artesania Latina! Welcome aboard! 👍😀
  5. Dave_E
    Welcome! Glad to have you aboard!👍😀
  6. Dave_E
    Looking forward to it. Don’t be shy about asking questions! 👍
  7. Dave_E
    Bump what everyone said above. What I found was the sets that cost $20 or so from Amazon have a good hand drill, the set of micro bits… that’s where I had issues. So, I bought the smaller bits separate in packs of 10 as I broke the originals (or deemed them useless). The bits you can buy are WAY superior to the bits that come in a kit.
  8. Dave_E
    I’ve decided to keep the mast and the bow sprit “wood” with no paint. I’ll paint the spars black. The kit has walnut dowels for everything. Any suggestions on stain? Just leave it?
  9. Dave_E
    Jim - post a photo or two with the description of your progress. 😀
  10. Dave_E
    I spent the day fixing the mounts. I filled in the old cut out and square holes, then laid out the new position for the cross brace, cut new notches and the sprit sits at the angle per the drawing. 👌 I then drilled a 1mm hole through the mounts and the sprit and will use wire. I don’t have what it takes to cut out a 1mm square. On to other deck equipment and more eyelets.
  11. Dave_E
    I’ll second that! Nice paint! 👍
  12. Dave_E
    The rattler is one of my future builds. I’ve pulled up the “follow” chair for your Rattler. 👍😀
  13. Dave_E
    NICE! 👍
  14. Dave_E
    Hi Joe, I would start from scratch and mechanically clean the entire part and start your blacken from scratch. The exposed bare parts are probably oxidized and won’t take the blackening solution. Your results were the same as mine before I mechanically cleaned the parts to remove protective finishes applied by the manufacturer. They blackened beautifully and then whipped right off like yours did. Give it a try. 👍
  15. Dave_E
    Thanks Greg. I have Glenn’s completed Lady saved on speed dial and I visit it often when something I’m not sure about comes up and his build is a creation of quality that inspires me and gives me a result to strive for. I’m going to rebuild the original parts, will send photos when complete. Thanks 👍
  16. Dave_E
    Thanks Glenn. Good insight. I have found at least 5 drawing errors so far, this is the worst. I'll have to think about this one. 😐
  17. Dave_E
    Hi All, This question is really for anyone who has built the Lady. I'm to a point where I'm building the implements and structures on deck. The bow sprit mount... all per drawing and in place. I set the bow sprit in place. It doesn't even come close to sitting in the cutout at the bow ( see photo 1) without the angle being all wrong. The box cover from Amati shows the bow sprit way up off the cutout and covering the holes for the forestay. is this one of those fix the bad kit moments? Lowering the mount?
  18. Dave_E
    Hi All, Don’t see a forum sub area where a build log for the NRG Half Hull project would fit. I plan to build the Half Hull before I start the Rattlesnake as it is a single plank “POB”, and I remember what my first planking was like on the Lady Nelson and must know what I’m doing before I start it.
  19. Dave_E
    I can’t help it. Comes from a lifetime of: being raised in a military family, then being in the military for 16 years, then 33 years at major aircraft manufacturer and all the way hearing, seeing and doing “clean as you go”. 😀
  20. Dave_E
    Welcome Marty, glad to have you. Look forward to your build. 👍😀
  21. Dave_E
    Welcome to the forum! Good place! Go say hi in the new member area. 😀
  22. Dave_E
    Hey Tim, I did not follow your build (too many to follow on the forum). Outstanding build! I too am a first time builder and hope you don’t mind if I pick your brain about some of your rigging techniques. I hope my first build comes even a little close to this beautiful ship! 👍
  23. Dave_E
    This is getting serious now boys. 😆
  24. Dave_E
    Yo Cat - welcome to the forum. Some of the processes and procedures for home building is the same on a model ship... just WAY smaller.😆 Look forward to your build. 👍
  25. Dave_E
    I’m totally down with that Allan! After spending a few hours this week, just starting the process, was just curious about the time it takes for a larger model.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...