Beef Wellington

BE, Pat, Joe, Michael, Nils, Wayne, JPAM  and the likes - thanks so much.
 
Ron - I'm hoping to make it, would love to see your fantastic Diana in person, my challenge is always football/soccer as I coach my sons team and that takes a big bite out of weekends at this time of year.  If I could just arrange a game in New London then I'd be set!
 
Small update, I've been missing making posts but I have a little to share and hope pictures make up for it.  Continuing to work on the more foundational aspects as I can.  Paint has been applied to the upper hull - I used Tamiya matt XF-18 medium blue.  I applied many layers of watered down paint and corrected larger imperfections, but left the slight imperfections from planking visible.  I'm no painter and have limited experience with modern acrylics!  Watering down the paint gives a nice smooth finish, but at the expense of surface uniformity - this should disappear completely once a clear sealer is applied so not concerned.  I found that using a brush the undiluted paint dries so quickly that brush mark are inevitable.  Lots of touchup to do which should be pretty easy, but I want to get a protective coat of poly onto the boxwood to reduce the risk of mishaps.
 
The waist rail has been applied on one side and the side steps added.  I left gaps for the fenders, after having already cut these roughly to shape - using boxwood of course adds the number of pieces that need to be fabricated to keep consistent.  I wont attach these until later.  Steps were made using 2x2mm boxwood strip and a different profile scraper to the side molding and then cut length and shaping the ends.  These hopefully give more of an impression of the fine molding as keeping that to scale was just too much for me.  The upper and lower 2 steps are not glued yet.  I think they pass the scale test with the assistance of Able Seaman Lewis.


I've also made up the anchor lining bolsters, not identified in the kit plans but approximated from AOTS and TFFM.


And the usual 'all over' shot of where things stand..

 
 
 

BE, Pat, Joe, Michael, Nils, Wayne, JPAM  and the likes - thanks so much.
 
Ron - I'm hoping to make it, would love to see your fantastic Diana in person, my challenge is always football/soccer as I coach my sons team and that takes a big bite out of weekends at this time of year.  If I could just arrange a game in New London then I'd be set!
 
Small update, I've been missing making posts but I have a little to share and hope pictures make up for it.  Continuing to work on the more foundational aspects as I can.  Paint has been applied to the upper hull - I used Tamiya matt XF-18 medium blue.  I applied many layers of watered down paint and corrected larger imperfections, but left the slight imperfections from planking visible.  I'm no painter and have limited experience with modern acrylics!  Watering down the paint gives a nice smooth finish, but at the expense of surface uniformity - this should disappear completely once a clear sealer is applied so not concerned.  I found that using a brush the undiluted paint dries so quickly that brush mark are inevitable.  Lots of touchup to do which should be pretty easy, but I want to get a protective coat of poly onto the boxwood to reduce the risk of mishaps.
 
The waist rail has been applied on one side and the side steps added.  I left gaps for the fenders, after having already cut these roughly to shape - using boxwood of course adds the number of pieces that need to be fabricated to keep consistent.  I wont attach these until later.  Steps were made using 2x2mm boxwood strip and a different profile scraper to the side molding and then cut length and shaping the ends.  These hopefully give more of an impression of the fine molding as keeping that to scale was just too much for me.  The upper and lower 2 steps are not glued yet.  I think they pass the scale test with the assistance of Able Seaman Lewis.


I've also made up the anchor lining bolsters, not identified in the kit plans but approximated from AOTS and TFFM.


And the usual 'all over' shot of where things stand..

 
 
 

Thanks for the likes
 
I’ve added the 7mm waterways, and continued planking with 3mm from the centre out towards the edge. To do this I needed to find a way of cutting a whole bunch of 3mm planks to the same length. I used a template with a stanley knife blade, hitting it with a hammer, to cut the planks one by one. This was surprisingly effective and quick, and I’ve been very pleased with the results. The template was made using "display case section" offcuts stuck onto a ply offcut. I used the display case section because I had it left over... the advantage being that it's nice and square, reasonably cheap (from Cornwall Model Boats) and a good size for this stuff... and they can be quickly and easily glued with carpenters glue.
 
Hopefully the following pictures are fairly self-explanatory. It's probably worth saying that if you're going to hit a stanley knife blade with a hammer, please wear safety goggles!
 

 

 

 
Once cut, the 3mm planks aren’t very sharp on the edges, so I made a second template to sand them to size… this was a head-scratcher, because I wanted the planks to end up exactly 3mm wide… eventually, I settled on using 1.5mm plasticard glued together with plastic-weld… This allowed me to make two sides (one fixed, and the other floating) that could be put on each side of a stack of planks… One edge was flattened using a scraper, and then the planks were turned over to scrape the other side to get the width down to 3mm.
 

 

 

 

 
The pressure of the scraper and a hand holding the floating side of the template in place was sufficient to get the job done...
Once scraped, I edged all the planks with a sharpie marker.
Here are the results...
 

 
Once I got to the edge of the top and butt planking, I started adding these in. I’ve been using Shipyard Sid’s template to do this, and it’s been extremely helpful.
 

 
I’m almost finished on the port side, then it’ll be the same again to complete the deck.
 
Here are the results so far... Not perfect, but it hasn't been scraped yet, so I'm pretty happy. The caulking should tone down a little bit when it's scraped, and I'm aiming for the newly built look, so I don't mind if it's fairly dark.
 

 

 

 

 
That's it for now
 
Happy building
 
Rob
 
[edited to restore photos, 11, 13 July 2017]
 
 

BE, Pat, Joe, Michael, Nils, Wayne, JPAM  and the likes - thanks so much.
 
Ron - I'm hoping to make it, would love to see your fantastic Diana in person, my challenge is always football/soccer as I coach my sons team and that takes a big bite out of weekends at this time of year.  If I could just arrange a game in New London then I'd be set!
 
Small update, I've been missing making posts but I have a little to share and hope pictures make up for it.  Continuing to work on the more foundational aspects as I can.  Paint has been applied to the upper hull - I used Tamiya matt XF-18 medium blue.  I applied many layers of watered down paint and corrected larger imperfections, but left the slight imperfections from planking visible.  I'm no painter and have limited experience with modern acrylics!  Watering down the paint gives a nice smooth finish, but at the expense of surface uniformity - this should disappear completely once a clear sealer is applied so not concerned.  I found that using a brush the undiluted paint dries so quickly that brush mark are inevitable.  Lots of touchup to do which should be pretty easy, but I want to get a protective coat of poly onto the boxwood to reduce the risk of mishaps.
 
The waist rail has been applied on one side and the side steps added.  I left gaps for the fenders, after having already cut these roughly to shape - using boxwood of course adds the number of pieces that need to be fabricated to keep consistent.  I wont attach these until later.  Steps were made using 2x2mm boxwood strip and a different profile scraper to the side molding and then cut length and shaping the ends.  These hopefully give more of an impression of the fine molding as keeping that to scale was just too much for me.  The upper and lower 2 steps are not glued yet.  I think they pass the scale test with the assistance of Able Seaman Lewis.


I've also made up the anchor lining bolsters, not identified in the kit plans but approximated from AOTS and TFFM.


And the usual 'all over' shot of where things stand..

 
 
 

A quandry with the Quarter Galleries
 
Thanks all for the continued interest.  Slow progress continues, the usually slow pace has also been impacted by me losing my job late last year which theoretically meant I have a lot more time on my hands, but has unfortunately in practice sapped my enjoyment to some degree.  This was coupled with some continuing challenges with the copper finish.  I've forced myself to stand back and leave alone to later date so have moved on...
 
The quarter galleries seem to once again present quite the challenge I think to look right.  The kit instructions are very simple, attach the quarter gallery panel to an upper and lower former, then attach the lights - but do not identify which is which.  Analysis of the provided PE lights show similar problems to the stern lights; they are slightly too short, and their geometry is not quite right but think these can be accommodated.  Each light is a slight different height, but think CC went the wrong way the one that is tallest should be shortest and vice versa.
 

 
Sure this could have worked, but wanted a little more control over the outcome to fine tune as I go.  I decided to frame up the actually gallery to be more robust so built up the front and back with some spare ply.  Shaping was done before attaching my own cut fascia piece cut from some extra 1.5mm ply - I did this so I could represent the fore and aft lights as false lights (as per AOTS) similar to the stern fascia as I've decided to stray away from the modelling ideal and represent as close as possible to actual practice. 
 
The geometry of this arrangement seemed to boil down to two key elements.  The fore and aft planes of the gallery should be parallel when viewed side on, and the lie of the gallery should be parallel to the wale.  Allowing for the slight tumblehome and compromising the above objectives together with the actual shape of the lights brought everything together by trial and error.  The build up on the fascia was done in exactly the same way as on the stern fascia.  I pre-bent the horizontal strips vertically first to ease attachment.  These still require a little fine tuning.
 
One note, I decided to used 4mm strip for the columns rather than 3mm which is probably closer to the plans and AOTS.  The reason for this is that the PE decorations are approx. 3mm wide and I think would look awkward - don't think this minor change affects the overall look too much.
 

 
As a diversion, I started to experiment with making a scraper to develop what will hopefully one day be moldings.  The razor blade was simply cut with a dremel and the narrowest cutting blade I could find (AND PROTECTIVE EYEWEAR AND LOTS OF CARE).  The result is far from perfect (lots of tries to find one that works) but its amazing how imperfections can be dealt with by simply taking your time and focusing on the end result - I was pleasantly surprised at my first attempt.  I much prefer the look to the supplied white metal supplied for the stern, and the provided cut walnut for the sides.
 

 
Putting everything in place allowed me to check alignment, and I was happy with the way things turned out.  Aligning with the still dry fitted stern fascia and placing the side molding approximately where it should be showed that this appears to cut the quarter gallery mid way through the top pane - pretty much where it appears in the AOTS diagrams.  To my eye, the compromises seem to disappear except upon close inspection and are less noticeable in person.  Now the prototype is done, need to do the port side...
 

Thanks Hennie and Ulises,
 
I know.....hurry is never good but I can get the drill goes slower and tomorrow ,I'm finished 
The fix is done and pictures will follow.
I also done the railing for the middle deck.
 
Sjors
 

BE, Pat, Joe, Michael, Nils, Wayne, JPAM  and the likes - thanks so much.
 
Ron - I'm hoping to make it, would love to see your fantastic Diana in person, my challenge is always football/soccer as I coach my sons team and that takes a big bite out of weekends at this time of year.  If I could just arrange a game in New London then I'd be set!
 
Small update, I've been missing making posts but I have a little to share and hope pictures make up for it.  Continuing to work on the more foundational aspects as I can.  Paint has been applied to the upper hull - I used Tamiya matt XF-18 medium blue.  I applied many layers of watered down paint and corrected larger imperfections, but left the slight imperfections from planking visible.  I'm no painter and have limited experience with modern acrylics!  Watering down the paint gives a nice smooth finish, but at the expense of surface uniformity - this should disappear completely once a clear sealer is applied so not concerned.  I found that using a brush the undiluted paint dries so quickly that brush mark are inevitable.  Lots of touchup to do which should be pretty easy, but I want to get a protective coat of poly onto the boxwood to reduce the risk of mishaps.
 
The waist rail has been applied on one side and the side steps added.  I left gaps for the fenders, after having already cut these roughly to shape - using boxwood of course adds the number of pieces that need to be fabricated to keep consistent.  I wont attach these until later.  Steps were made using 2x2mm boxwood strip and a different profile scraper to the side molding and then cut length and shaping the ends.  These hopefully give more of an impression of the fine molding as keeping that to scale was just too much for me.  The upper and lower 2 steps are not glued yet.  I think they pass the scale test with the assistance of Able Seaman Lewis.


I've also made up the anchor lining bolsters, not identified in the kit plans but approximated from AOTS and TFFM.


And the usual 'all over' shot of where things stand..

 
 
 

Out of breath reading the last installment, so much to consider, the only think missing from this rip roaring tale are a couple of gypsies thrown in for spice.  I was devastated to see the issues with the log (seems to be every time that there is an upgrade) and want to say again how appreciative of your time and effort I, and I'm sure everyone, is to keep this jewel of a log alive and kicking.  So much great information, tips and tricks...I love the shot of the great cabin deck, I'm assuming its not accessible at this point though?

BE, Pat, Joe, Michael, Nils, Wayne, JPAM  and the likes - thanks so much.
 
Ron - I'm hoping to make it, would love to see your fantastic Diana in person, my challenge is always football/soccer as I coach my sons team and that takes a big bite out of weekends at this time of year.  If I could just arrange a game in New London then I'd be set!
 
Small update, I've been missing making posts but I have a little to share and hope pictures make up for it.  Continuing to work on the more foundational aspects as I can.  Paint has been applied to the upper hull - I used Tamiya matt XF-18 medium blue.  I applied many layers of watered down paint and corrected larger imperfections, but left the slight imperfections from planking visible.  I'm no painter and have limited experience with modern acrylics!  Watering down the paint gives a nice smooth finish, but at the expense of surface uniformity - this should disappear completely once a clear sealer is applied so not concerned.  I found that using a brush the undiluted paint dries so quickly that brush mark are inevitable.  Lots of touchup to do which should be pretty easy, but I want to get a protective coat of poly onto the boxwood to reduce the risk of mishaps.
 
The waist rail has been applied on one side and the side steps added.  I left gaps for the fenders, after having already cut these roughly to shape - using boxwood of course adds the number of pieces that need to be fabricated to keep consistent.  I wont attach these until later.  Steps were made using 2x2mm boxwood strip and a different profile scraper to the side molding and then cut length and shaping the ends.  These hopefully give more of an impression of the fine molding as keeping that to scale was just too much for me.  The upper and lower 2 steps are not glued yet.  I think they pass the scale test with the assistance of Able Seaman Lewis.


I've also made up the anchor lining bolsters, not identified in the kit plans but approximated from AOTS and TFFM.


And the usual 'all over' shot of where things stand..

 
 
 

Here's an update just for you Sjors...
 
Since finding out the Aggy lights are not an option been trying to figure out where I want to go with these.  I realized that the thickness of the mullions of the supplied PE parts was a major reason why the lights just did sit well to my eye.  Plucked up the courage to thin these down with the smallest file I had.  The photo below shows the filed down ones at center and on the right, original on the left.  I stopped here for now at the risk of taking too much off and ruining these pieces reserving the right to possibly thin a little more after I've looked at them for a bit.  I deliberately left the top 'mullion' thicker to simulate the single sash.  Definitely would appreciate others opinions and suggestions here....
 
I shaped some 1x1mm box for the cove moldings, the trickiest to get right were the outside coves as the curve is so tight.  Left the strip to soak for a day and then steamed with an iron over a cardboard tube left over from some rigging line which was about the right shape.  I'll try to shape this a little with a scraper at a later date.
 
I placed the various cast ornaments for now to get a sense for alignment even though I would like to try and carve some replacements and was pleased with the way these sat together, my eye being very sensitive to proportions for some reason.  I'm happy so far.
 

 
Something else just hit me as I was reconciling various dimensions and it also explains discrepancies in the kit plans and supplied parts.  I'm estimating that the width of the bulwarks at the stern is approx. 10mm larger (5mm each side) in the kit than is identified in the AOTS and possibly explains why the supplied stern fascia is so wide - for comparison below you can see the kit supplied PE versus my version..  I wanted the proportions shown in the AOTS and you can see the rough misalignment  I don't think that this will be that noticeable so I'm not proposing to do anything else here.  The angles look rather off in this view but to the eye it is much less jarring.
 

 
Lastly, a slightly more forgiving angle showing the expected  results of all the compromises, overall, I think this may just work.  Obviously lots to do yet and a few more tricky problems to solve...including some carving.
 

Out of breath reading the last installment, so much to consider, the only think missing from this rip roaring tale are a couple of gypsies thrown in for spice.  I was devastated to see the issues with the log (seems to be every time that there is an upgrade) and want to say again how appreciative of your time and effort I, and I'm sure everyone, is to keep this jewel of a log alive and kicking.  So much great information, tips and tricks...I love the shot of the great cabin deck, I'm assuming its not accessible at this point though?

BE, Pat, Joe, Michael, Nils, Wayne, JPAM  and the likes - thanks so much.
 
Ron - I'm hoping to make it, would love to see your fantastic Diana in person, my challenge is always football/soccer as I coach my sons team and that takes a big bite out of weekends at this time of year.  If I could just arrange a game in New London then I'd be set!
 
Small update, I've been missing making posts but I have a little to share and hope pictures make up for it.  Continuing to work on the more foundational aspects as I can.  Paint has been applied to the upper hull - I used Tamiya matt XF-18 medium blue.  I applied many layers of watered down paint and corrected larger imperfections, but left the slight imperfections from planking visible.  I'm no painter and have limited experience with modern acrylics!  Watering down the paint gives a nice smooth finish, but at the expense of surface uniformity - this should disappear completely once a clear sealer is applied so not concerned.  I found that using a brush the undiluted paint dries so quickly that brush mark are inevitable.  Lots of touchup to do which should be pretty easy, but I want to get a protective coat of poly onto the boxwood to reduce the risk of mishaps.
 
The waist rail has been applied on one side and the side steps added.  I left gaps for the fenders, after having already cut these roughly to shape - using boxwood of course adds the number of pieces that need to be fabricated to keep consistent.  I wont attach these until later.  Steps were made using 2x2mm boxwood strip and a different profile scraper to the side molding and then cut length and shaping the ends.  These hopefully give more of an impression of the fine molding as keeping that to scale was just too much for me.  The upper and lower 2 steps are not glued yet.  I think they pass the scale test with the assistance of Able Seaman Lewis.


I've also made up the anchor lining bolsters, not identified in the kit plans but approximated from AOTS and TFFM.


And the usual 'all over' shot of where things stand..

 
 
 

BE, Pat, Joe, Michael, Nils, Wayne, JPAM  and the likes - thanks so much.
 
Ron - I'm hoping to make it, would love to see your fantastic Diana in person, my challenge is always football/soccer as I coach my sons team and that takes a big bite out of weekends at this time of year.  If I could just arrange a game in New London then I'd be set!
 
Small update, I've been missing making posts but I have a little to share and hope pictures make up for it.  Continuing to work on the more foundational aspects as I can.  Paint has been applied to the upper hull - I used Tamiya matt XF-18 medium blue.  I applied many layers of watered down paint and corrected larger imperfections, but left the slight imperfections from planking visible.  I'm no painter and have limited experience with modern acrylics!  Watering down the paint gives a nice smooth finish, but at the expense of surface uniformity - this should disappear completely once a clear sealer is applied so not concerned.  I found that using a brush the undiluted paint dries so quickly that brush mark are inevitable.  Lots of touchup to do which should be pretty easy, but I want to get a protective coat of poly onto the boxwood to reduce the risk of mishaps.
 
The waist rail has been applied on one side and the side steps added.  I left gaps for the fenders, after having already cut these roughly to shape - using boxwood of course adds the number of pieces that need to be fabricated to keep consistent.  I wont attach these until later.  Steps were made using 2x2mm boxwood strip and a different profile scraper to the side molding and then cut length and shaping the ends.  These hopefully give more of an impression of the fine molding as keeping that to scale was just too much for me.  The upper and lower 2 steps are not glued yet.  I think they pass the scale test with the assistance of Able Seaman Lewis.


I've also made up the anchor lining bolsters, not identified in the kit plans but approximated from AOTS and TFFM.


And the usual 'all over' shot of where things stand..

 
 
 

BE, Pat, Joe, Michael, Nils, Wayne, JPAM  and the likes - thanks so much.
 
Ron - I'm hoping to make it, would love to see your fantastic Diana in person, my challenge is always football/soccer as I coach my sons team and that takes a big bite out of weekends at this time of year.  If I could just arrange a game in New London then I'd be set!
 
Small update, I've been missing making posts but I have a little to share and hope pictures make up for it.  Continuing to work on the more foundational aspects as I can.  Paint has been applied to the upper hull - I used Tamiya matt XF-18 medium blue.  I applied many layers of watered down paint and corrected larger imperfections, but left the slight imperfections from planking visible.  I'm no painter and have limited experience with modern acrylics!  Watering down the paint gives a nice smooth finish, but at the expense of surface uniformity - this should disappear completely once a clear sealer is applied so not concerned.  I found that using a brush the undiluted paint dries so quickly that brush mark are inevitable.  Lots of touchup to do which should be pretty easy, but I want to get a protective coat of poly onto the boxwood to reduce the risk of mishaps.
 
The waist rail has been applied on one side and the side steps added.  I left gaps for the fenders, after having already cut these roughly to shape - using boxwood of course adds the number of pieces that need to be fabricated to keep consistent.  I wont attach these until later.  Steps were made using 2x2mm boxwood strip and a different profile scraper to the side molding and then cut length and shaping the ends.  These hopefully give more of an impression of the fine molding as keeping that to scale was just too much for me.  The upper and lower 2 steps are not glued yet.  I think they pass the scale test with the assistance of Able Seaman Lewis.


I've also made up the anchor lining bolsters, not identified in the kit plans but approximated from AOTS and TFFM.


And the usual 'all over' shot of where things stand..

 
 
 

BE, Pat, Joe, Michael, Nils, Wayne, JPAM  and the likes - thanks so much.
 
Ron - I'm hoping to make it, would love to see your fantastic Diana in person, my challenge is always football/soccer as I coach my sons team and that takes a big bite out of weekends at this time of year.  If I could just arrange a game in New London then I'd be set!
 
Small update, I've been missing making posts but I have a little to share and hope pictures make up for it.  Continuing to work on the more foundational aspects as I can.  Paint has been applied to the upper hull - I used Tamiya matt XF-18 medium blue.  I applied many layers of watered down paint and corrected larger imperfections, but left the slight imperfections from planking visible.  I'm no painter and have limited experience with modern acrylics!  Watering down the paint gives a nice smooth finish, but at the expense of surface uniformity - this should disappear completely once a clear sealer is applied so not concerned.  I found that using a brush the undiluted paint dries so quickly that brush mark are inevitable.  Lots of touchup to do which should be pretty easy, but I want to get a protective coat of poly onto the boxwood to reduce the risk of mishaps.
 
The waist rail has been applied on one side and the side steps added.  I left gaps for the fenders, after having already cut these roughly to shape - using boxwood of course adds the number of pieces that need to be fabricated to keep consistent.  I wont attach these until later.  Steps were made using 2x2mm boxwood strip and a different profile scraper to the side molding and then cut length and shaping the ends.  These hopefully give more of an impression of the fine molding as keeping that to scale was just too much for me.  The upper and lower 2 steps are not glued yet.  I think they pass the scale test with the assistance of Able Seaman Lewis.


I've also made up the anchor lining bolsters, not identified in the kit plans but approximated from AOTS and TFFM.


And the usual 'all over' shot of where things stand..

 
 
 

BE, Pat, Joe, Michael, Nils, Wayne, JPAM  and the likes - thanks so much.
 
Ron - I'm hoping to make it, would love to see your fantastic Diana in person, my challenge is always football/soccer as I coach my sons team and that takes a big bite out of weekends at this time of year.  If I could just arrange a game in New London then I'd be set!
 
Small update, I've been missing making posts but I have a little to share and hope pictures make up for it.  Continuing to work on the more foundational aspects as I can.  Paint has been applied to the upper hull - I used Tamiya matt XF-18 medium blue.  I applied many layers of watered down paint and corrected larger imperfections, but left the slight imperfections from planking visible.  I'm no painter and have limited experience with modern acrylics!  Watering down the paint gives a nice smooth finish, but at the expense of surface uniformity - this should disappear completely once a clear sealer is applied so not concerned.  I found that using a brush the undiluted paint dries so quickly that brush mark are inevitable.  Lots of touchup to do which should be pretty easy, but I want to get a protective coat of poly onto the boxwood to reduce the risk of mishaps.
 
The waist rail has been applied on one side and the side steps added.  I left gaps for the fenders, after having already cut these roughly to shape - using boxwood of course adds the number of pieces that need to be fabricated to keep consistent.  I wont attach these until later.  Steps were made using 2x2mm boxwood strip and a different profile scraper to the side molding and then cut length and shaping the ends.  These hopefully give more of an impression of the fine molding as keeping that to scale was just too much for me.  The upper and lower 2 steps are not glued yet.  I think they pass the scale test with the assistance of Able Seaman Lewis.


I've also made up the anchor lining bolsters, not identified in the kit plans but approximated from AOTS and TFFM.


And the usual 'all over' shot of where things stand..

 
 
 

BE, Pat, Joe, Michael, Nils, Wayne, JPAM  and the likes - thanks so much.
 
Ron - I'm hoping to make it, would love to see your fantastic Diana in person, my challenge is always football/soccer as I coach my sons team and that takes a big bite out of weekends at this time of year.  If I could just arrange a game in New London then I'd be set!
 
Small update, I've been missing making posts but I have a little to share and hope pictures make up for it.  Continuing to work on the more foundational aspects as I can.  Paint has been applied to the upper hull - I used Tamiya matt XF-18 medium blue.  I applied many layers of watered down paint and corrected larger imperfections, but left the slight imperfections from planking visible.  I'm no painter and have limited experience with modern acrylics!  Watering down the paint gives a nice smooth finish, but at the expense of surface uniformity - this should disappear completely once a clear sealer is applied so not concerned.  I found that using a brush the undiluted paint dries so quickly that brush mark are inevitable.  Lots of touchup to do which should be pretty easy, but I want to get a protective coat of poly onto the boxwood to reduce the risk of mishaps.
 
The waist rail has been applied on one side and the side steps added.  I left gaps for the fenders, after having already cut these roughly to shape - using boxwood of course adds the number of pieces that need to be fabricated to keep consistent.  I wont attach these until later.  Steps were made using 2x2mm boxwood strip and a different profile scraper to the side molding and then cut length and shaping the ends.  These hopefully give more of an impression of the fine molding as keeping that to scale was just too much for me.  The upper and lower 2 steps are not glued yet.  I think they pass the scale test with the assistance of Able Seaman Lewis.


I've also made up the anchor lining bolsters, not identified in the kit plans but approximated from AOTS and TFFM.


And the usual 'all over' shot of where things stand..

 
 
 

BE, Pat, Joe, Michael, Nils, Wayne, JPAM  and the likes - thanks so much.
 
Ron - I'm hoping to make it, would love to see your fantastic Diana in person, my challenge is always football/soccer as I coach my sons team and that takes a big bite out of weekends at this time of year.  If I could just arrange a game in New London then I'd be set!
 
Small update, I've been missing making posts but I have a little to share and hope pictures make up for it.  Continuing to work on the more foundational aspects as I can.  Paint has been applied to the upper hull - I used Tamiya matt XF-18 medium blue.  I applied many layers of watered down paint and corrected larger imperfections, but left the slight imperfections from planking visible.  I'm no painter and have limited experience with modern acrylics!  Watering down the paint gives a nice smooth finish, but at the expense of surface uniformity - this should disappear completely once a clear sealer is applied so not concerned.  I found that using a brush the undiluted paint dries so quickly that brush mark are inevitable.  Lots of touchup to do which should be pretty easy, but I want to get a protective coat of poly onto the boxwood to reduce the risk of mishaps.
 
The waist rail has been applied on one side and the side steps added.  I left gaps for the fenders, after having already cut these roughly to shape - using boxwood of course adds the number of pieces that need to be fabricated to keep consistent.  I wont attach these until later.  Steps were made using 2x2mm boxwood strip and a different profile scraper to the side molding and then cut length and shaping the ends.  These hopefully give more of an impression of the fine molding as keeping that to scale was just too much for me.  The upper and lower 2 steps are not glued yet.  I think they pass the scale test with the assistance of Able Seaman Lewis.


I've also made up the anchor lining bolsters, not identified in the kit plans but approximated from AOTS and TFFM.


And the usual 'all over' shot of where things stand..

 
 
 

BE, Pat, Joe, Michael, Nils, Wayne, JPAM  and the likes - thanks so much.
 
Ron - I'm hoping to make it, would love to see your fantastic Diana in person, my challenge is always football/soccer as I coach my sons team and that takes a big bite out of weekends at this time of year.  If I could just arrange a game in New London then I'd be set!
 
Small update, I've been missing making posts but I have a little to share and hope pictures make up for it.  Continuing to work on the more foundational aspects as I can.  Paint has been applied to the upper hull - I used Tamiya matt XF-18 medium blue.  I applied many layers of watered down paint and corrected larger imperfections, but left the slight imperfections from planking visible.  I'm no painter and have limited experience with modern acrylics!  Watering down the paint gives a nice smooth finish, but at the expense of surface uniformity - this should disappear completely once a clear sealer is applied so not concerned.  I found that using a brush the undiluted paint dries so quickly that brush mark are inevitable.  Lots of touchup to do which should be pretty easy, but I want to get a protective coat of poly onto the boxwood to reduce the risk of mishaps.
 
The waist rail has been applied on one side and the side steps added.  I left gaps for the fenders, after having already cut these roughly to shape - using boxwood of course adds the number of pieces that need to be fabricated to keep consistent.  I wont attach these until later.  Steps were made using 2x2mm boxwood strip and a different profile scraper to the side molding and then cut length and shaping the ends.  These hopefully give more of an impression of the fine molding as keeping that to scale was just too much for me.  The upper and lower 2 steps are not glued yet.  I think they pass the scale test with the assistance of Able Seaman Lewis.


I've also made up the anchor lining bolsters, not identified in the kit plans but approximated from AOTS and TFFM.


And the usual 'all over' shot of where things stand..

 
 
 

BE, Pat, Joe, Michael, Nils, Wayne, JPAM  and the likes - thanks so much.
 
Ron - I'm hoping to make it, would love to see your fantastic Diana in person, my challenge is always football/soccer as I coach my sons team and that takes a big bite out of weekends at this time of year.  If I could just arrange a game in New London then I'd be set!
 
Small update, I've been missing making posts but I have a little to share and hope pictures make up for it.  Continuing to work on the more foundational aspects as I can.  Paint has been applied to the upper hull - I used Tamiya matt XF-18 medium blue.  I applied many layers of watered down paint and corrected larger imperfections, but left the slight imperfections from planking visible.  I'm no painter and have limited experience with modern acrylics!  Watering down the paint gives a nice smooth finish, but at the expense of surface uniformity - this should disappear completely once a clear sealer is applied so not concerned.  I found that using a brush the undiluted paint dries so quickly that brush mark are inevitable.  Lots of touchup to do which should be pretty easy, but I want to get a protective coat of poly onto the boxwood to reduce the risk of mishaps.
 
The waist rail has been applied on one side and the side steps added.  I left gaps for the fenders, after having already cut these roughly to shape - using boxwood of course adds the number of pieces that need to be fabricated to keep consistent.  I wont attach these until later.  Steps were made using 2x2mm boxwood strip and a different profile scraper to the side molding and then cut length and shaping the ends.  These hopefully give more of an impression of the fine molding as keeping that to scale was just too much for me.  The upper and lower 2 steps are not glued yet.  I think they pass the scale test with the assistance of Able Seaman Lewis.


I've also made up the anchor lining bolsters, not identified in the kit plans but approximated from AOTS and TFFM.


And the usual 'all over' shot of where things stand..

 
 
 

Bob, looking forward to learning more from you in this ship and especially the lumberyard kits, they look very nice indeed.  Really nice clean start.

Once again, welcome aboard to all. your interest is always appreciated.
 
A few words about what I received from the Lumberyard, and about the direction that I intend to take. To begin with, this is a build using Hahn plans (included in the package), and the Hahn upside down construction method (a laser cut framing jig is included). The package contains laser cut framing pieces, including the keel, stem, stern post, rudder, keelson and frame futtocks. I ordered all of that in boxwood. There are various other laser cut pieces such as deck beams. I also got a sheet with laser cut pieces for the stern transom windows and carvings and the quarter badges and windows. The package also contains a good deal of sheet and strip wood in boxwood, pear and some other woods for planking and other purposes. In general, the laser cutting appears to be very good and the strip and sheet looks good, but not as smoothly finished as that from Crown. One potential problem looms. The jig and the keel assembly ( which I have put together) don't match the drawings in length. They do, however, exactly match up to one another. Hopefully, this means that the construction will proceed without difficulty, although yielding a model slightly longer than that shown in the drawings.
 
I have obtained a copy of Hahn's book "The Colonial Schooner 1763- 1775" to assist in construction. It is my present intention to plank both sides from the wales up and to leave the lower hull unplanned, although I may decide to fully plank one side of the lower hull. I intend to detail the interior of the hull, with lower decking, partitions, etc. Upper decking will be left partially open to allow a view of the lower interior.
 
I am attaching a photo of the jig, a rather poor photo of the package contents and a photo of the assembled keel. It's now time to get to work on the frames.
 
Bob
 
 
 


 
 





 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Some updates ...

несколько фотографий

BE, Pat, Joe, Michael, Nils, Wayne, JPAM  and the likes - thanks so much.
 
Ron - I'm hoping to make it, would love to see your fantastic Diana in person, my challenge is always football/soccer as I coach my sons team and that takes a big bite out of weekends at this time of year.  If I could just arrange a game in New London then I'd be set!
 
Small update, I've been missing making posts but I have a little to share and hope pictures make up for it.  Continuing to work on the more foundational aspects as I can.  Paint has been applied to the upper hull - I used Tamiya matt XF-18 medium blue.  I applied many layers of watered down paint and corrected larger imperfections, but left the slight imperfections from planking visible.  I'm no painter and have limited experience with modern acrylics!  Watering down the paint gives a nice smooth finish, but at the expense of surface uniformity - this should disappear completely once a clear sealer is applied so not concerned.  I found that using a brush the undiluted paint dries so quickly that brush mark are inevitable.  Lots of touchup to do which should be pretty easy, but I want to get a protective coat of poly onto the boxwood to reduce the risk of mishaps.
 
The waist rail has been applied on one side and the side steps added.  I left gaps for the fenders, after having already cut these roughly to shape - using boxwood of course adds the number of pieces that need to be fabricated to keep consistent.  I wont attach these until later.  Steps were made using 2x2mm boxwood strip and a different profile scraper to the side molding and then cut length and shaping the ends.  These hopefully give more of an impression of the fine molding as keeping that to scale was just too much for me.  The upper and lower 2 steps are not glued yet.  I think they pass the scale test with the assistance of Able Seaman Lewis.


I've also made up the anchor lining bolsters, not identified in the kit plans but approximated from AOTS and TFFM.


And the usual 'all over' shot of where things stand..