Jump to content
MSW Spring Donation Drive

KenW

NRG Member
 View Profile  See their activity

  • Posts

    1,204

  • Joined

  • Last visited

 Content Type 

Everything posted by KenW

  1. KenW
    WOW, great build and a really cool looking boat. That stern is very high. Were there any problems with the boat being top heavy? You're off to an excellent start. Cheers.
  2. KenW
    Thanks EJ. I'll check out your La Couronne.
  3. KenW
    This past Tuesday I displayed the Rattlesnake at the monthly meeting of the SMSNJ. During my talk, I mentioned that I intended to use the MS kit supplied dye cast metal stern decorations since I didn’t think I could make those intricate carvings. Chuck Passaro felt that was a mistake. His suggestion was to have a background or ‘back splash’ and laminate carvings onto it. The stern carving is really a bunch of small carvings, so it isn’t necessary to do one big carving. I liked the idea. So I decided to order a couple walnut sheets from Jason at Crown Timberland for the back splash. And last night, I carved the rattlesnake. I’m pleased with the carving, and everyone in my family could tell what it was. It certainly is better that the snake on the kit supplied metal decoration (although I guess I should have a higher standard than that). So on to all those floral carvings.
  4. KenW
    Thanks Jon. Good advice. I'm also not sold on clay. I also don't think I can produce the carvings that are on the Hahn or MS plans. But, there must be something in the middle. Your carvings look great, by the way. I would definitely be happy with your work. Cheers.
  5. KenW
    Thanks Jon and Martin. I gave Jonathan a 'like' even though it's more like an 'dislike' since I realize how hard it's going to be to create those pieces. You guys just reinforced my feeling of dread. However, this is a hobby and I will take my time and hope for the best. Like Angie said, 'Tain't a hobby if you hurry". Cheers.
  6. KenW
    Well, I finished the stern planking. I like the look – colors, etc. But the real work is just beginning. I’m going to try and use the die cast metal decoration. I filed the MS piece so it is thinner (about 1/16th of an inch). I will paint the die cast metal using the same techniques as I used on the figurehead. I added two pins to help hold up the metal decoration (it also makes it easier to work with). The bigger problem is that on Hahn plans, there is another piece of decoration behind the supplied metal one. There are also fashion pieces with decoration that need to be created. Since they aren’t supplied, I’m going to have to create/carve them both.
  7. KenW
    Great work as usual, Bob. At the tip of the bowsprit, are that metal loops or eyes rather than line? How were then attached to the bowsprit? Thanks.
  8. KenW
    Absolutely well done.
  9. KenW
    Hey Jason. Looks like you have a great build going. Good to see you have time for some modeling. Cheers.
  10. KenW
    WOW! I just read through Blue Ensign's Pegasus blog. He did way more fancy stuff than I did! His is really impressive. I'll have to read more of his logs. Thanks.
  11. KenW
    Thanks Dave, Jack and Jon and the 'likes'. And Jon, what I say here stays here.
  12. KenW
    I finally finished with the Iroquois figurehead. I knew that I wouldn’t be able to carve it, but luckily I have a good friend who is a war gamer. He told me about a site that sold Native American figures that can be included as part of a revolutionary army. I bought twenty figures, and was very impressed with the sculptor. The problem was that all the ‘indians’ were holding a rifle, which I didn’t want on the model. Since the dye cast metal is soft, I cut away the rifle as best I could from the figure I chose. But, that left the left hand unusable. So I took a left hand from another figure, cut off the bad hand and glued the new left hand (which was holding a hatchet) onto the ‘stump’. I also replaced the head because the head feathers were too high. The result looked good. I then painted the figure the same way my friend paints his armies: paint the figure black and when it's dry, add a white dry brush. Next apply several coats of a yellow wash, followed by a black wash made of acrylic floor wax, water and calligraphy ink. The figurehead is not glued to the model yet since I have to make sure the hatchet doesn’t interfere with the bob stay. Over all, I think it looks just fine. I only hope my explanation makes sense.
  13. KenW
    I wonder if the place where your pieces go when they drop on the floor is the same place as where my pieces go. They never turn up - ever. There must be a place with lots of parts for model ships somewhere. Impressive chocks.
  14. KenW
    Thanks Martin, and the 'likes'.
  15. KenW
    All 20 guns are now installed. The boat looks good with them all lined up. One thing I noticed is that the four quoin handles I created this time are both smaller and better looking than those I made before. I guess I’m doing better; but I won’t be starting over. The work on the hull aft will not wait any longer; I have to get to it.
  16. KenW
    Congrats. You are ready for your launching party! Really outstanding workmanship. Cheers.
  17. KenW
    Now the head is truly finished. The bow sprint with its gammoning, the ‘seats of ease’, and the platform are complete. I do plan on making a hand railing, but I want to wait until the rigging is done so I can insure that the railing doesn’t foul the lines. So, for now, my plan is to move aft with the installation of the last 4 guns.
  18. KenW
    Jon - like your jig, I'll have to make one like it when I get to that point. Cheers.
  19. KenW
    Hey Nigel. I'm going to follow along. I might try my hand at a full sized frigate for my next build, but that is over a year away. Good work so far. Cheers.
  20. KenW
    Thanks Bob, Eric, Gordon, Gerty and Martin and the 'likes'.
  21. KenW
    Thanks Jonathan. My figurehead is being prepared 'as we speak'. Although, I'm not carving it. I know I can't do as good a job on the figurehead, as well as those stern decorations, as you did. I considering other options. Cheers.
  22. KenW
    The head took a while but it's done and I’m satisfied with the result. I used Minwax Wood Hardener on the end of the head rail where a line will be tied off since the end looks very thin. Not much else to say, except I’m on to the ‘seats of ease’. I’m thinking, however, that before I complete the platform, I will have to install the bow sprint and its gammoning.
  23. KenW
    I like the stand - and your work space is way too neat. Cheers.
  24. KenW
    I must express my shock and sorrow upon hearing of the passage of my 'friend' Augie. He was always encouraging to us 'new guys' and his knowledge and advise were welcome and often sought after. And, his advice never felt like criticism. His posts gave the impression of a likable and encouraging person. He will be sorely missed. If you are not aware, there is a site set up for MSW users to express their feelings. It can be found at - "http://modelshipworld.com/index.php/topic/12546-augie-bruno/".
  25. KenW
    Thanks Greg and Dan. I'll plan out the location of the catheads while working on the head rails. I'll be at the SMSNJ meeting on the 26th and hope to bring the model. Cheers.

About us

Modelshipworld - Advancing Ship Modeling through Research

SSL Secured

Your security is important for us so this Website is SSL-Secured

NRG Mailing Address

Nautical Research Guild
237 South Lincoln Street
Westmont IL, 60559-1917

Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)

Helpful Links

About the NRG

If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.

The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.

The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.

Our Emblem ®

Modelshipworld - Advancing Ship Modeling through Research

Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)

×
×
  • Create New...