hof00 Posted February 8, 2017 Share #1 Posted February 8, 2017 Hi All, I started this some time ago as a little "Light" relief after the Cutty Sark. Was hoping for a quick build, but as we all are aware, there is no really "Quick" build in this hobby. I only have a "Smattering"of Photos in the very early stages of the build before I literally "Shelved" the project. The build is a little more advanced with Bulwarks, Etc. attached but will need to think about De-Constructing these and making good. As stated, it's been away for a while but I think that I will concentrate after Pen Duick in, hopefully 2 - 3 weeks time. Unfortunately, I cannot do multiple builds, I need to focus on one thing at a time. Looking at LA Don's build has given me a bit of incentive to complete this. I think that this will also benefit from LED Lighting. yvesvidal, Steve 12345, oscarmate and 2 others 5 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
Steve 12345 Posted February 8, 2017 Share #2 Posted February 8, 2017 Came across this kit a few times will be keen to follow and see how it builds up Quote Link to comment Share on other sites More sharing options...
hof00 Posted February 8, 2017 Author Share #3 Posted February 8, 2017 Your most welcome Sir, There may be some "De-construction" happening in a couple of weeks time. Cheers....HOF. Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted February 12, 2017 Author Share #4 Posted February 12, 2017 (edited) O.k. not much of a Sunday for Modelling, Not particularly in the right frame of mind. I have however taken a couple of Photos of Sanson as of today. Shouldn't be too much of an issue to Remove the Bulwark/Superstructure Sides, finish the Deck a little better and redo the Wheel House, and re-paint stuff of course. As I may have mentioned, I think I'll do some LED Lighting and see if I can get my hands on some Fibre Optics to do the Navigation and Mast Lights. (Anyway, that's the plan going forward. ) I have all the necessary Bits and Pieces to complete. Edited February 12, 2017 by hof00 hexnut and Steve 12345 2 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted July 28, 2017 Author Share #5 Posted July 28, 2017 O.K. Disassembled what I had already done. Not particularly happy with what I had done, or, for that matter the "Finish." So, Superstructure has gone as has everything that touched the Deck! I am pretty confident that I can rescue all the bits and have already started to gauge/think about the way to approach things in a constructive manner. The first thing is to sand back components, assemble and paint. (No Photos as yet, will Post when I have something "Positive" to share.) Cheers....HOF. Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
cog Posted July 28, 2017 Share #6 Posted July 28, 2017 Courageous 'arry, I'll look forward to what you will dish us up. Any pictures on the destruction of the deck furnishings? Nice to compare with your future build up. Cheers Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ... Link to comment Share on other sites More sharing options...
hof00 Posted August 3, 2017 Author Share #7 Posted August 3, 2017 (edited) So, things are moving on a little, removed old Glue/s on components, sanded back and starting to re-assemble. Bulwarks tomorrow but the bulk of the tear-Down/Re-Furbish is complete. I did have Coamings around the Main Deck House, unsure if I'll re-install these. Main Deck House reassembled and will give it a "Spray" tomorrow. I'll hopefully get some photos posted tomorrow also. It is my intention to add Lighting to the interior and exterior, could someone point me in the right direction as to what the colours should be for the various lights on the Mast? Cheers....HOF. Edited August 3, 2017 by hof00 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
S.Coleman Posted August 3, 2017 Share #8 Posted August 3, 2017 Hmmmmm. I do like an old tear er down and redo story. Look forward to its. Quote Regards, Scott Current build: 1:75 Friesland, Mamoli Completed builds: 1:64 Rattlesnake, Mamoli - 1:64 HMS Bounty, Mamoli - 1:54 Adventure, Amati - 1:80 King of the Mississippi, AL 1:64 Blue Shadow, Mamoli - 1:64 Leida Dutch pleasure boat, Corel - 1:60 HMS President Mantra, Sergal Awaiting construction: 1:89 Hermione La Fayette AL - 1:48 Perserverance, Modelers shipyard Link to comment Share on other sites More sharing options...
hof00 Posted August 3, 2017 Author Share #9 Posted August 3, 2017 Thanks Scott, This was something that I thought would be a "Quick Win" after the Cutty Sark, a Planking and Painting exercise, unfortunately, there are no quick wins in this hobby.... Patience is a virtue. So, I halted the build in 2014 and "Shelved It." (Literally) I was never happy with the input thus far so best to "Tear" it down, I feel better for it. I hate re-work but I should have done it right first time!! (Feeling "Positive") Cheers....HOF. cog 1 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted August 5, 2017 Author Share #10 Posted August 5, 2017 Small update, Bought some Diodes, Green/Red/Yellow White, Veroboard, Etc. Still stripping Glue, old paint and generally tidying things up. I'll add some detail to the Wheelhouse with a Ships Wheel and a Telegraph. Pretty happy with progress at this juncture. Photos soonish.... Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted August 12, 2017 Author Share #11 Posted August 12, 2017 Small update, Started putting things back together after cleaning up the various components. Not too much damage, a good thing. White components sprayed with Tamiya TS 26, Inner Bulwarks Brush Painted "Atelier" Deep Yellow. (Need a thinned coat to finish) Time to start on the Wheelhouse, Interior to be Re-Planked and I'll add some internal detail, Ships Wheel, Telegraph. Lighting, Interior and Exterior to be planned. Some Photos of the "Tear Down for your viewing pleasure. Cheers....HOF. ccoyle and cog 2 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
cog Posted August 14, 2017 Share #12 Posted August 14, 2017 Nice work chap ... slow an' steady Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ... Link to comment Share on other sites More sharing options...
Derek C Posted August 14, 2017 Share #13 Posted August 14, 2017 This looks like a cool build ,can't wait to see it come together . I am on the hunt for my next project as my first model is about done. Quote Derek C Quote A man without a goal is like a ship without a rudder --Thomas Carlyle Current Build 18th Century Whaling Vessel "Lagoda" Finished Builds Triton Cross Section by Derek C 1/48 18th century longboat by Slideways - FINISHED - Model Shipways 18th century longboat by sideways from MS plans Link to comment Share on other sites More sharing options...
hof00 Posted August 14, 2017 Author Share #14 Posted August 14, 2017 Thanks Carl/Slideways, Yup, slow and steady this time around. Lighting and a bit of extra detail will help the basic kit overall. (I'm hoping anyway ) Cheers....HOF. Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted September 1, 2017 Author Share #15 Posted September 1, 2017 Hi All, A couple of photos of progress on the re-build thus far. So, I wanted to see how things looked, a bit of a "Mock-up" really. Ventilators were sprayed with Alclad, Polished Brass, as I'm not that wealthy that I can get these cast in Brass. (As much as I'd like to....) Still much to do but I think will be worth the effort. Cheers....HOF. John Allen, Vladimir_Wairoa and cog 3 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
cog Posted September 1, 2017 Share #16 Posted September 1, 2017 (edited) Progress ... I like the way those vents turned out. Brass is really looking good 'arry Edited September 1, 2017 by cog Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ... Link to comment Share on other sites More sharing options...
hof00 Posted November 4, 2017 Author Share #17 Posted November 4, 2017 Hi All, A Mock-Up.... Progress? I think the "Tear Down" has been worthwhile thus far. Looks like a bit like a Christmas Tree.... I guess this is soon the time of year. LED installed in Deck House/Engine Room (High Intensity LED's Not Cheap!!) Installed also in the Wheelhouse and "Navigation" lights Mast Lights will come eventually, wiring installed. I'll drill out the Nav' and Masthead Lights to accept the LED's Cheers....HOF. cog, Duanelaker, John Allen and 6 others 9 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
cog Posted November 4, 2017 Share #18 Posted November 4, 2017 Nice going 'arry. Love the lights lmagna 1 Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ... Link to comment Share on other sites More sharing options...
cog Posted March 25, 2018 Share #19 Posted March 25, 2018 Harry, I almos see digital dust accumulatin' on your log. Hope everything is well Cheers Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ... Link to comment Share on other sites More sharing options...
hof00 Posted March 25, 2018 Author Share #20 Posted March 25, 2018 Thanks Chap, Yup, a bit of "Digital Dust" so to speak. (Doing some career searching....) Hopefully get some done this long weekend. Cheers....HOF. Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted August 18, 2018 Author Share #21 Posted August 18, 2018 (edited) O.k. After some "Soul Searching" and not wish to start anything new, I had a good look at the progress thus far.... (Not that anything has been done for a few months.) I have, in the interim, purchased a new Compressor, with a Tank and Regulator. Since this is also a "Tear Down" and "Rebuild" there is some trepidation, should I Just shelve it and do something else? (Rhetorical question, I guess) I also had attempts at "Glazing" Portlights, my Punches were not good enough.... Tried Clear Silicone also but have now opted for no glazing, no stress.... 🙂 Regarding "Alclad" in my experience, the finish doesn't take kindly to "Handling." Is this others experience? Anyway, onwards/upwards.... Cheers....HOF. Edited August 18, 2018 by hof00 cog 1 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
cog Posted August 18, 2018 Share #22 Posted August 18, 2018 digital compressor ... to get rid of the afore mentioned dust ... good to see you at the shop again Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ... Link to comment Share on other sites More sharing options...
hof00 Posted August 18, 2018 Author Share #23 Posted August 18, 2018 Cheers Ears!! (As some would say here.... :-)) HOF. cog 1 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted September 21, 2018 Author Share #24 Posted September 21, 2018 O/K. Some Digital Dust, so to speak, Thanks Carl. 🙂 I am re-acquainting myself with the build.... (And with the flow of the hobby. :-)) It's been a while, life gets in the way sometimes. Anyway, the Tear Down Re-build is starting,/progressing I have a "Fitting" Wheel House and pretty much Bulwarks. I'll post some photos soonixh…. Cheers....HOF. cog 1 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
cog Posted September 21, 2018 Share #25 Posted September 21, 2018 Can't wait to see some action mate Cheers Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ... Link to comment Share on other sites More sharing options...
hof00 Posted October 31, 2018 Author Share #26 Posted October 31, 2018 Smallish update.... After several months of inactivity, I am working to get my "Mojo" back. Continuing on with the Tear Down/Build.... (More Build Now) The majority of the components haver been cleaned up and re-painted. I need to re-fit the wheelhouse so that light doesn't leak out. Navigation Light fittings have been drilled out to accept LED's Interior Bulwarks have been re-sprayed Cabling tidied Brass Ventilators/Portlights/Prop. re-sprayed (Alclad) Brass "Grab Handles" installed as are Doors and Portlights. Unsure if I'll Glaze the Wheel House. (Don't really like the Acetate.) I think it'll be o.k. (Good to do something positive for a change) Little and often.... Cheers....HOF. cog and yvesvidal 2 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
cog Posted October 31, 2018 Share #27 Posted October 31, 2018 Nice mate, a lot of litt'l uns 'll do me fine Acetate ... you could use perspex if you do not like the former ... just a thought ... Cheers Quote Carl "Desperate affairs require desperate measures." Lord Nelson Search and you might find a log ... Link to comment Share on other sites More sharing options...
hof00 Posted November 18, 2018 Author Share #28 Posted November 18, 2018 (edited) Small update: Bulwarks attached, (Superstructure inclusive), but have not yet finished the Wheelhouse. (That's attached with a bit of Masking Tape to enable the Hull to be sanded without breaking stuff. Looks a bit like a "Ship Wreck" but am confident it'll be o.k. (Please be gentle with me, this is a complete Tear Down/Rebuild so it's going to look not too flash in the initial stages. 1st Planking about 50% complete, a bit of filler, but I'm not ashamed of this. 🙂 (Just or you Carl, the "Digital Dust" is starting to dissipate!! Good to be back in "The Fold" as it were. :-)) BTW: Does anyone know what colors the Masthead lights might have been/are? There's three of them.... and the Resistor Circuit Board is set up for three series connections. (Any advice gratefully welcomed.) Cheers....HOF. Edited November 18, 2018 by hof00 Update to post cog 1 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
hof00 Posted November 20, 2018 Author Share #29 Posted November 20, 2018 Hi All, Researching Masthead Lights for a "Towing Vessel." Google search indicates White nd two Red, Top down. I'll go with this for the mo unless anyone else has some "Gems" that they would like to share.... 😊 Cheers....HOF. Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
Mirabell61 Posted November 21, 2018 Share #30 Posted November 21, 2018 Hi Hof, thats a nice tug model. Probably you noticed it already, but please do`nt forget to change the nav lights,.... red to the port side,... green to stb.. Cheers, Nils Quote Current builds -Lightship Elbe 1 Completed - Steamship Ergenstrasse ex Laker Corsicana 1918- scale 1:87 scratchbuild - "Zeesboot" heritage wooden fishing small craft around 1870, POB clinker scratch build scale 1:24 - Pilot Schooner # 5 ELBE ex Wanderbird, scale 1:50 scratchbuild - Mississippi Sterwheelsteamer built as christmapresent for grandson modified kit build - Chebec "Eagle of Algier" 1753--scale 1:48-POB-(scratchbuild) "SS Kaiser Wilhelm der Grosse" four stacker passenger liner of 1897, blue ribbond awarded, 1:144 (scratchbuild) "HMS Pegasus" , 16 gun sloop, Swan-Class 1776-1777 scale 1:64 from Amati plan -"Pamir" 4-mast barque, P-liner, 1:96 (scratchbuild) -"Gorch Fock 2" German Navy cadet training 3-mast barque, 1:95 (scratchbuild) "Heinrich Kayser" heritage Merchant Steamship, 1:96 (scratchbuild) original was my grandfathers ship -"Bohuslän" , heritage ,live Swedish museum passenger steamer (Billings kit), 1:50 "Lorbas", river tug, steam driven for RC, fictive design (scratchbuild), scale appr. 1:32 under restoration / restoration finished "Hjejlen" steam paddlewheeler, 1861, Billings Boats rare old kit, scale 1:50 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.