drobinson02199 Posted March 7, 2020 Author #31 Posted March 7, 2020 John -- Yes, it does angle back just a bit. Just the way it came out when I drilled the hole for the mounting. Regards, David Quote David Robinson Boston, MA area Completed: Constructo J.S. Elcano, Artesinia Latina Sanson, Dumas Mt. Washington, Bluejacket Nantucket, Amati Revenge, Artesania Latina King of the Mississippi, Amati Grand Banks Heritage 46, Amati HMS Fly, Amati Titanic, Dumas Chris Craft Commuter, Mantua Cutty Sark, Mantua Bruma, Kolderstok Batavia, Vanguard Models HM Cutter Alert, Caldercraft HMS Victory, Dumas USCG Fast Response Cutter Currently Building: Amati Bismarck
drobinson02199 Posted March 9, 2020 Author #32 Posted March 9, 2020 Cabin interior finished with hatchway, side tables, wheel and bitts. Regards, David gieb8688, BobG, hof00 and 1 other 4 Quote David Robinson Boston, MA area Completed: Constructo J.S. Elcano, Artesinia Latina Sanson, Dumas Mt. Washington, Bluejacket Nantucket, Amati Revenge, Artesania Latina King of the Mississippi, Amati Grand Banks Heritage 46, Amati HMS Fly, Amati Titanic, Dumas Chris Craft Commuter, Mantua Cutty Sark, Mantua Bruma, Kolderstok Batavia, Vanguard Models HM Cutter Alert, Caldercraft HMS Victory, Dumas USCG Fast Response Cutter Currently Building: Amati Bismarck
drobinson02199 Posted March 27, 2020 Author #33 Posted March 27, 2020 Back to work on the Bruma after a couple of weeks in Florida. Finished the cabin exterior details including handrails, vents, horn and light, and fire extinguishers and life rings. Tricky paint work on the extinguishers. Regards, David GrandpaPhil and hof00 2 Quote David Robinson Boston, MA area Completed: Constructo J.S. Elcano, Artesinia Latina Sanson, Dumas Mt. Washington, Bluejacket Nantucket, Amati Revenge, Artesania Latina King of the Mississippi, Amati Grand Banks Heritage 46, Amati HMS Fly, Amati Titanic, Dumas Chris Craft Commuter, Mantua Cutty Sark, Mantua Bruma, Kolderstok Batavia, Vanguard Models HM Cutter Alert, Caldercraft HMS Victory, Dumas USCG Fast Response Cutter Currently Building: Amati Bismarck
drobinson02199 Posted March 31, 2020 Author #34 Posted March 31, 2020 All of the deck detail is now complete. Pictures show bow area with capstan, life preserver containers, small tables, hatch covers, ladder, boarding walkway and stern seat. That's it for the hull -- now on to the masts and rigging. Regards, David yvesvidal, hof00, BobG and 3 others 6 Quote David Robinson Boston, MA area Completed: Constructo J.S. Elcano, Artesinia Latina Sanson, Dumas Mt. Washington, Bluejacket Nantucket, Amati Revenge, Artesania Latina King of the Mississippi, Amati Grand Banks Heritage 46, Amati HMS Fly, Amati Titanic, Dumas Chris Craft Commuter, Mantua Cutty Sark, Mantua Bruma, Kolderstok Batavia, Vanguard Models HM Cutter Alert, Caldercraft HMS Victory, Dumas USCG Fast Response Cutter Currently Building: Amati Bismarck
drobinson02199 Posted April 5, 2020 Author #35 Posted April 5, 2020 Masts, booms and bowsprit are shaped and mounted, and I'm now starting on the rigging. One of the detail drawings indicates that brass winches were supplied, but I can't find them anywhere, so I made them from my spare parts stock using deadeyes, filled with wood filler and painted gold, some brass parts that I think were supposed to be deck buckets, and wire. Regards, David hof00, BobG, yvesvidal and 3 others 6 Quote David Robinson Boston, MA area Completed: Constructo J.S. Elcano, Artesinia Latina Sanson, Dumas Mt. Washington, Bluejacket Nantucket, Amati Revenge, Artesania Latina King of the Mississippi, Amati Grand Banks Heritage 46, Amati HMS Fly, Amati Titanic, Dumas Chris Craft Commuter, Mantua Cutty Sark, Mantua Bruma, Kolderstok Batavia, Vanguard Models HM Cutter Alert, Caldercraft HMS Victory, Dumas USCG Fast Response Cutter Currently Building: Amati Bismarck
BobG Posted April 5, 2020 #36 Posted April 5, 2020 Gorgeous boat, David! Nice save on the winches too. drobinson02199 1 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild
samson Posted April 5, 2020 #37 Posted April 5, 2020 nice looking yart . and nice finnish , drobinson02199 and BobG 2 Quote
drobinson02199 Posted April 9, 2020 Author #38 Posted April 9, 2020 The Bruma is complete. I've posted a set of completion photos in the kit-built ship gallery. This was a relatively easy kit, which was my intention after building the Cutty Sark and laying all of those copper plates! A few comments on the kit: A number of missing small parts, none of them fatal. I was able to go to my spare wood/parts store and improvise. There is one rigging diagram, and while the rigging isn't complex, the diagram is very hard to read. You need to pull all the photos you can find from the internet and use them as a reference to be sure what goes where. Regards, David yvesvidal, gsdpic, hof00 and 7 others 10 Quote David Robinson Boston, MA area Completed: Constructo J.S. Elcano, Artesinia Latina Sanson, Dumas Mt. Washington, Bluejacket Nantucket, Amati Revenge, Artesania Latina King of the Mississippi, Amati Grand Banks Heritage 46, Amati HMS Fly, Amati Titanic, Dumas Chris Craft Commuter, Mantua Cutty Sark, Mantua Bruma, Kolderstok Batavia, Vanguard Models HM Cutter Alert, Caldercraft HMS Victory, Dumas USCG Fast Response Cutter Currently Building: Amati Bismarck
ccoyle Posted April 9, 2020 #39 Posted April 9, 2020 Congratulations on a beautiful model, David! drobinson02199 1 Quote Chris Coyle Greer, South Carolina When you have to shoot, shoot. Don't talk. - Tuco Current builds: Brigantine Phoenix, DS Børøysund
BobG Posted April 9, 2020 #40 Posted April 9, 2020 3 hours ago, drobinson02199 said: he Bruma is complete. You've built a beautiful and interesting model, David, and it's the only complete build log of this model on the forum. Congratulations! drobinson02199 1 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild
Jim Lad Posted April 9, 2020 #41 Posted April 9, 2020 A very elegant little model, David. John drobinson02199 1 Quote
rshousha Posted April 9, 2020 #42 Posted April 9, 2020 Great model and a wonderful subject. Does the manufacturer say what they used for a prototype? She looks a bit like a Hans Christian design but not quite. She's the kind of boat that would be perfect to kick around in the Arctic. drobinson02199 1 Quote Rick Shousha Montreal
drobinson02199 Posted April 9, 2020 Author #43 Posted April 9, 2020 Rick: Here's the quotation from Mantua's writeup on the boat: "This is a lovely scale reproduction of an ocean going fishing boat, converted into a pleasure yacht" Regards, David Quote David Robinson Boston, MA area Completed: Constructo J.S. Elcano, Artesinia Latina Sanson, Dumas Mt. Washington, Bluejacket Nantucket, Amati Revenge, Artesania Latina King of the Mississippi, Amati Grand Banks Heritage 46, Amati HMS Fly, Amati Titanic, Dumas Chris Craft Commuter, Mantua Cutty Sark, Mantua Bruma, Kolderstok Batavia, Vanguard Models HM Cutter Alert, Caldercraft HMS Victory, Dumas USCG Fast Response Cutter Currently Building: Amati Bismarck
gsdpic Posted April 9, 2020 #44 Posted April 9, 2020 Congrats! Very nice looking end result. I enjoyed following along. drobinson02199 1 Quote - Gary Current Build: Artesania Latina Sopwith Camel Completed Builds: Blue Jacket America 1/48th Annapolis Wherry
GrandpaPhil Posted April 11, 2020 #45 Posted April 11, 2020 Congratulations! Well done! drobinson02199 1 Quote Building: 1:200 Russian Battleship Oryol (Orel card kit) 1:64 HMS Revenge (Victory Models plans) 1:64 Cat Esther (17th Century Dutch Merchant Ships)
brian barber Posted February 1, 2021 #46 Posted February 1, 2021 Hi David and greetings from the UK. I have just bought a Bruma kit and found your build blog on line. I must say that there is more info in your photos than in the written kit instructions! I was wondering if you built up the area aft of rib 11 so that you had a good base to glue the planking to, and similarly forward of rib 1. It seems to me that something needs to be there. Best regards, Brian Barber Quote
drobinson02199 Posted February 1, 2021 Author #47 Posted February 1, 2021 Hello, Brian. I can't recall - but I would only have done so if they supplied balsa and called for it in the instructions. I use a steamer to take tension off the planks for bends like the ones you are referring to. Good luck - it's a nice little kit. Regards, David Quote David Robinson Boston, MA area Completed: Constructo J.S. Elcano, Artesinia Latina Sanson, Dumas Mt. Washington, Bluejacket Nantucket, Amati Revenge, Artesania Latina King of the Mississippi, Amati Grand Banks Heritage 46, Amati HMS Fly, Amati Titanic, Dumas Chris Craft Commuter, Mantua Cutty Sark, Mantua Bruma, Kolderstok Batavia, Vanguard Models HM Cutter Alert, Caldercraft HMS Victory, Dumas USCG Fast Response Cutter Currently Building: Amati Bismarck
brian barber Posted February 1, 2021 #48 Posted February 1, 2021 Thanks David, I'll see how I get on and let you know how it goes. The steamer seems to be a very good option. Brian. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.