Old Collingwood Posted May 28, 2022 Author Share #451 Posted May 28, 2022 4 minutes ago, king derelict said: I like your plan better than just shelving a great model. I think how you do the sea will be critical. Maybe create a base with some depth so you can cut the hull far enough back to avoid damage to elements you want to keep. It would also allow you to set the parts at the angles you want. A layer of epoxy resin would probably be good at the surface. @mikegris an e,left at seascapes add probably has great suggestions I'm looking forward to seeing it develop Good luck Alan Thank you Alan, I have never done a sea scape in my life - but I think it will be different - I was thinking of constructing a wooden base but not cover the whole area of it with water - just use the water in the centre and and around both hull parts - putting focus on them that way. OC. Canute 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
king derelict Posted May 28, 2022 Share #452 Posted May 28, 2022 There are some real experts on the forum, @mikegr, @Landlubber Mikeand @CDWcome to mind. This guy has some great ideas and skills too I think you will have fun Alan Canute 1 Quote Link to comment Share on other sites More sharing options...
mtaylor Posted May 28, 2022 Share #453 Posted May 28, 2022 Not a bad idea, OC. I would look at it as not scraping the kit but "changing it". Canute and king derelict 2 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 28, 2022 Author Share #454 Posted May 28, 2022 1 hour ago, king derelict said: There are some real experts on the forum, @mikegr, @Landlubber Mikeand @CDWcome to mind. This guy has some great ideas and skills too I think you will have fun Alan Thank you kindly for finding this link Alan. OC. mtaylor and Canute 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 28, 2022 Author Share #455 Posted May 28, 2022 56 minutes ago, mtaylor said: Not a bad idea, OC. I would look at it as not scraping the kit but "changing it". Indeed Mark, I seem to be getting a liking for dio's lately. OC. Canute and mtaylor 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 28, 2022 Author Share #456 Posted May 28, 2022 I so loved these Resin Water's I have a jar I have been using on my Waterloo build (Pond) etc. and seen online how you make a frame and poor your mixture in then when part set oyu place or push in your hull/s. OC. Canute and mtaylor 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
mikegr Posted May 28, 2022 Share #457 Posted May 28, 2022 (edited) 5 hours ago, king derelict said: There are some real experts on the forum, @mikegr, @Landlubber Mikeand @CDWcome to mind. This guy has some great ideas and skills too I think you will have fun Alan I Would probably have to build several projects before become an expert but thanks for mentioning my name as a helpful hand to other members Edited May 28, 2022 by mikegr Canute, Old Collingwood and mtaylor 3 Quote Link to comment Share on other sites More sharing options...
Veszett Roka Posted May 28, 2022 Share #458 Posted May 28, 2022 Hi OC, this might give you some idea. Personally i do not like to cover up the ship this amount, but otherwise it looks fantastic. You might consider to check out this modeler on Youtube, he has inspiring techniques and tricks. king derelict, yvesvidal, mtaylor and 1 other 2 2 Quote Link to comment Share on other sites More sharing options...
king derelict Posted May 28, 2022 Share #459 Posted May 28, 2022 13 hours ago, Old Collingwood said: Thank you kindly for finding this link Alan. OC. Derrick has several water themed diorama videos on YouTube including seas with bursting waves. The epoxy water is beautiful. One warning based on my experience. If you use epoxy in any depth make sure your walls or frames are solid. The stuff will deep past anything insubstantial and it's really hard to scrape off the top of a clothes dryer! Alan Canute and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 28, 2022 Author Share #460 Posted May 28, 2022 11 hours ago, Veszett Roka said: Hi OC, this might give you some idea. Personally i do not like to cover up the ship this amount, but otherwise it looks fantastic. You might consider to check out this modeler on Youtube, he has inspiring techniques and tricks. Yep I was watching that video - incredible work. OC. Canute and mtaylor 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 28, 2022 Author Share #461 Posted May 28, 2022 3 hours ago, king derelict said: Derrick has several water themed diorama videos on YouTube including seas with bursting waves. The epoxy water is beautiful. One warning based on my experience. If you use epoxy in any depth make sure your walls or frames are solid. The stuff will deep past anything insubstantial and it's really hard to scrape off the top of a clothes dryer! Alan Thank you kindly Alan, I would imagine a plastic square container would be fine. OC. mtaylor and Canute 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
king derelict Posted May 29, 2022 Share #462 Posted May 29, 2022 5 hours ago, Old Collingwood said: Thank you kindly Alan, I would imagine a plastic square container would be fine. OC. That should be find. I'm his videos he used masking tape but I found with the depth of resin I was using the tape bulges which caused problems with the display case and at one point it leaked and hence the dryer excitement. his name is Merrick by the way not Derrick. Darn Auto Corrupt Alan Old Collingwood and mtaylor 2 Quote Link to comment Share on other sites More sharing options...
Canute Posted May 29, 2022 Share #463 Posted May 29, 2022 Most definitely seal all the joints. At a club I was in, we poured a waterfront dock scene. Had half the bottle poured when the masking tape gave way. Big oops. mtaylor and king derelict 1 1 Quote Ken Started: MS Bounty Longboat, On Hold: Heinkel USS Choctaw paper Down the road: Shipyard HMC Alert 1/96 paper, Mamoli Constitution Cross, MS USN Picket Boat #1 Scratchbuild: Echo Cross Section Member Nautical Research Guild Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 29, 2022 Author Share #464 Posted May 29, 2022 3 minutes ago, Canute said: Most definitely seal all the joints. At a club I was in, we poured a waterfront dock scene. Had half the bottle poured when the masking tape gave way. Big oops. Thanks Ken, will deffo make sure what ever I use is strong and/or water tight. OC. mtaylor and Canute 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 29, 2022 Author Share #465 Posted May 29, 2022 Here's a question - is the best way to do it - to place both hull parts in (say a plastic tub being used for the water mix) then pour the mix in and around both hull parts - then when set, cut away the plastic tub and then place the sea/hull parts on to the base I want to use, will the resin sea part be tough enough to keep the hull parts in place till I place them on the base? OC. Canute and mtaylor 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
mtaylor Posted May 29, 2022 Share #466 Posted May 29, 2022 That might work OC. You might have to do a test to be sure. I was thinking an old picture frame and some plywood then line with plastic wrap and pour.. Trim away the excess plastic after the first pour. But the joints at the corners would need to well sealed. Canute 1 Quote Mark "The shipwright is slow, but the wood is patient." - me Current Build: Past Builds: La Belle Poule 1765 - French Frigate from ANCRE plans - ON HOLD Triton Cross-Section NRG Hallf Hull Planking Kit HMS Sphinx 1775 - Vanguard Models - 1:64 Non-Ship Model: On hold, maybe forever: CH-53 Sikorsky - 1:48 - Revell - Completed Licorne - 1755 from Hahn Plans (Scratch) Version 2.0 (Abandoned) Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 29, 2022 Author Share #467 Posted May 29, 2022 2 minutes ago, mtaylor said: That might work OC. You might have to do a test to be sure. I was thinking an old picture frame and some plywood then line with plastic wrap and pour.. Trim away the excess plastic after the first pour. But the joints at the corners would need to well sealed. Thanks Mark, will be an interesting experience and another learning curve. OC. Canute and mtaylor 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 29, 2022 Author Share #468 Posted May 29, 2022 (edited) First things first - I will have some bits to still fit to her - like the forward coning tower/look out bridge, and the forward 15in mounts, no need for me to worry about x and y turrets as they were blown off by the explosion on the rear deck, and I will be only showing the rear hull with only half of the open barbette for y turret showing as she looses the stern end first. OC. Edited May 29, 2022 by Old Collingwood king derelict, Canute and mtaylor 3 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
mikegr Posted May 29, 2022 Share #469 Posted May 29, 2022 Not sure how you want to do it but making a hull deeping in resin without previous experience working with it , its a really tricky business. Old Collingwood, Canute and mtaylor 3 Quote Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 29, 2022 Author Share #470 Posted May 29, 2022 Evening all, so work on this has started again, - started by painting some of the small item like vents, then the next thing to be built was the front coning tower look out mast and legs - very fiddly and akward to get them lined up, after an hour or so I gave it a coat of paint and a bit of wash to show the windows. OC. mikegr, Canute, king derelict and 4 others 7 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 29, 2022 Author Share #471 Posted May 29, 2022 Oh nearly foregot - I still have to add another cross spar and paint the legs Black. OC. mtaylor, Canute and king derelict 3 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 30, 2022 Author Share #472 Posted May 30, 2022 Did a bit more reading on Hoods fatal encounter with Bismarck and Prince Eugen, and found out Hood received atleat Three shots to her - one was a HE round from Prince Eugen that landed on the rear of the boat deck near to the main mast and made the 4in ready ammo lockers go off, a fire started but as the ammo cooking and going off everywhere crew was told to take cover, these fires and exploding ammo did stop after a while, the next one was a AP round from Bismarck that came down through the roof (as they were all using lunging shots due to the 12 + mile range) it went straight through the Spotting Top enclosure and came out the other side before going into the water, this killed all who were in there and knocked out the 284 radar. The last one that hit was the killer we all know about from Bismarck - going through the deck close the main mast ingniting the ammo and causing that Massive explosion that killed her. OC. mtaylor and Canute 1 1 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 30, 2022 Author Share #473 Posted May 30, 2022 A painting of her going down. off the internet. OC. Canute, GrandpaPhil, mtaylor and 2 others 5 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 30, 2022 Author Share #474 Posted May 30, 2022 Evening all, more work done today - I added more details to the top observation radar look out, and painted the legs/bottom starfish Black. I also relicated the 15in shell entrance and enry port. OC. Canute, mikegr, Landlubber Mike and 4 others 7 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 31, 2022 Author Share #475 Posted May 31, 2022 Evening all, more progress - the main forward 15in units built and dry fitted, I am sticking with the kit barrels as they are perfectly fine, I also put together the Two Pom Poms the other one will not be seen as it was lost same with the Twin 4in mounts. OC. Kevin-the-lubber, hof00, Canute and 3 others 6 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
hof00 Posted May 31, 2022 Share #476 Posted May 31, 2022 Hi Chap, Looking good!! (The detail is way too fine for the likes of myself.... 🙂) Cheers....HOF. Canute and mtaylor 2 Quote Completed Builds: A/L Bluenose II A/L Mare Nostrum Sergal/Mantua Cutty Sark A/L Pen Duick A/L Fulgaro Amati/Partworks 1/200 Bismarck A/L Sanson Link to comment Share on other sites More sharing options...
Old Collingwood Posted May 31, 2022 Author Share #477 Posted May 31, 2022 34 minutes ago, hof00 said: Hi Chap, Looking good!! (The detail is way too fine for the likes of myself.... 🙂) Cheers....HOF. Thank you kindly, certainly is a challenge at this scale. OC. mtaylor, Canute and hof00 3 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
king derelict Posted May 31, 2022 Share #478 Posted May 31, 2022 Looking very nice OC. Good to see this progressing again. The Flyhawk plastic barrels are really very nice. Its a toss up whether to use the metal ones and risk having them out of alignment. Alan Canute, mtaylor and mikegr 3 Quote Link to comment Share on other sites More sharing options...
Old Collingwood Posted June 1, 2022 Author Share #479 Posted June 1, 2022 1 hour ago, king derelict said: Looking very nice OC. Good to see this progressing again. The Flyhawk plastic barrels are really very nice. Its a toss up whether to use the metal ones and risk having them out of alignment. Alan Thank you kindly mate, and there are already part drilled out. OC. Canute and mtaylor 2 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Old Collingwood Posted June 1, 2022 Author Share #480 Posted June 1, 2022 I did a little Paint doodle - this is what I am thinking of for my base - the Blue represents the resin sea. OC. mtaylor, Canute, hof00 and 3 others 6 Quote Current builds 28mm Battle of Waterloo attack on La Haye Saint Diorama. 1/700 HMS Hood Flyhawk with PE, Resin and Wood Decking. Completed works. Dragon 1/700 HMS Edinburgh type 42 batch 3 Destroyer plastic. HMS Warspite Academy 1/350 plastic kit and wem parts. HMS Trafalgar Airfix 1/350 submarine plastic. Black Pearl 1/72 Revell with pirate crew. Revell 1/48 Mosquito B IV Eduard 1/48 Spitfire IX ICM 1/48 Seafire Mk.III Special Conversion 1/48 Kinetic Sea Harrier FRS1 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.