usedtosail Posted October 9, 2021 Author #61 Posted October 9, 2021 I gave all the assemblies a coat of wipe on poly then finished adding the pins to hold the bars in place. I glued the capstan base to the beams using the corner bolts to locate it to the holes I had already drilled. I used some weights to hold it down while the glue dried. This morning I started the assembly of the capstan model. I first trimmed the bolts for the capstan base and added them to the base. I then drilled the holes for the brakes and added the pins for them. I put the hatch into the coaming and glued the coaming to the base, again using weights to hold it down. mtaylor, gjdale, AON and 9 others 12 Quote - Tom - Current Build: Stay Tuned Completed: Vanguard Speedy, Vanguard Duchess of Kingston, Stove Project, Ships Wheel Project, NRG Capstan Project, Billings Half Moon, Dumas Chris Craft 1938 27' Triple Cockpit Barrel Back, Panart Santa Lucia , Model Shipways Constitution , MS Bounty Launch , HMS Beagle Member: Nautical Research Guild
usedtosail Posted October 10, 2021 Author #62 Posted October 10, 2021 I installed the capstan barrel and drum head, which completes the capstan project. This was a fun project and I especially enjoyed the scratch build aspect. I am not sure I am ready to tackle a whole ship as a scratch build project but it is not out of the question in the future. Thanks to the NRG and especially Toni Levine for her great instructions and plans, and her help during this build. KurtH, AON, Ryland Craze and 16 others 16 1 2 Quote - Tom - Current Build: Stay Tuned Completed: Vanguard Speedy, Vanguard Duchess of Kingston, Stove Project, Ships Wheel Project, NRG Capstan Project, Billings Half Moon, Dumas Chris Craft 1938 27' Triple Cockpit Barrel Back, Panart Santa Lucia , Model Shipways Constitution , MS Bounty Launch , HMS Beagle Member: Nautical Research Guild
PRS Posted October 11, 2021 #63 Posted October 11, 2021 Beautiful! usedtosail and mtaylor 2 Quote Paul Current Build: HMS Winchelsea 1764 1:48 Completed Build: HM Cutter Cheerful-Syren Ship Models 1/48 Completed Build: Artesania Latina Bluenose II Completed Build : Lady Nelson
G.L. Posted October 11, 2021 #64 Posted October 11, 2021 Very well done, Tom. you are absolutely ready to build an entire ship from scratch. usedtosail and mtaylor 2 Quote G.L. Current projects: Oostends schipje (Ostend shrimper) - scale 1:20 Clipper d'Argenteuil - POF - scale 1/15 - SMALL Completed projects: Norwegian Whale Boat - POF - scale 1/10 - SMALL Anatomy of a boat by G.L. - scale 1/10 - POF - SMALL Day gaff sailing boat with center board - FINISHED - SMALL - scale 1/10 Cross section fishing smack - FINISHED -scale 1:20HMS Triton cross section - FINISHED - Scale 1:24
usedtosail Posted October 14, 2021 Author #65 Posted October 14, 2021 Thank you Paul and GL and for the likes. mtaylor 1 Quote - Tom - Current Build: Stay Tuned Completed: Vanguard Speedy, Vanguard Duchess of Kingston, Stove Project, Ships Wheel Project, NRG Capstan Project, Billings Half Moon, Dumas Chris Craft 1938 27' Triple Cockpit Barrel Back, Panart Santa Lucia , Model Shipways Constitution , MS Bounty Launch , HMS Beagle Member: Nautical Research Guild
Justin P. Posted October 14, 2021 #66 Posted October 14, 2021 Great Job! I cant wait to start this project, you've done a wonderful job. mtaylor and usedtosail 2 Quote Current: US Brig SYREN - Model Shipways - Scale 1:64 Completed: HMS TRITON - Cross Section - Scale 1:48 / Gallery Secret Vessel MOREL - Master Korabel - Scale 1:36 / Gallery 18th Century Armed Longboat - Model Shipways - Scale 1:24 / Gallery HMS BOUNTY Launch - Model Shipways - Scale 1:16 / Gallery
usedtosail Posted October 25, 2021 Author #67 Posted October 25, 2021 Thanks Justin. So I am planking the Duchess of Kingston but I find I have more time in the day between planks, so I have decided to try something along the lines of this capstan project. Have a look here. I hope this works out. tlevine, FriedClams, BobG and 2 others 5 Quote - Tom - Current Build: Stay Tuned Completed: Vanguard Speedy, Vanguard Duchess of Kingston, Stove Project, Ships Wheel Project, NRG Capstan Project, Billings Half Moon, Dumas Chris Craft 1938 27' Triple Cockpit Barrel Back, Panart Santa Lucia , Model Shipways Constitution , MS Bounty Launch , HMS Beagle Member: Nautical Research Guild
EricWilliamMarshall Posted October 30, 2021 #68 Posted October 30, 2021 Impressive work! Well done! mtaylor, BobG and usedtosail 3 Quote Current adventures: USS Perry of 1843, model kit by Bluejacket - Scale 1:96 Lost at Sea: Dapper Tom - model kit by Model Shipways Previous adventures: an English Pinnace, model kit by Model Shipways, Opium Smuggler Schooner Yacht 1805, model kit by Authentic Holland Models Chesapeake Bay Flattie, model kit by Midwest, USS Constitution, model kit by Revell Albatros 1912, card model kit by HMV
BobG Posted October 30, 2021 #69 Posted October 30, 2021 Superb work, Tom! usedtosail and mtaylor 2 Quote Bob Garcia "Measure once, cuss twice!" Current Builds: Hms Brig-Sloop Flirt 1782 - Vanguard Models Pen Duick - Artesania Latina 1:28 Completed: Medway Longboat 1742 - Syren Ship Model Co. Member of the Nautical Research Guild
usedtosail Posted October 30, 2021 Author #70 Posted October 30, 2021 Thank you Eric and Bob. mtaylor 1 Quote - Tom - Current Build: Stay Tuned Completed: Vanguard Speedy, Vanguard Duchess of Kingston, Stove Project, Ships Wheel Project, NRG Capstan Project, Billings Half Moon, Dumas Chris Craft 1938 27' Triple Cockpit Barrel Back, Panart Santa Lucia , Model Shipways Constitution , MS Bounty Launch , HMS Beagle Member: Nautical Research Guild
usedtosail Posted October 30, 2021 Author #71 Posted October 30, 2021 Confession time. While looking at the capstan yesterday I realized I had installed the end beam under the grating the wrong way, i.e. the wider dimension was up and down not cross wise like the other two beams. If you look closely at the last pictures of the capstan you can just see it. I was able to gently remove the end beam, turn it 90 degrees, clean up the slots so the carlings would fit, and glue it back together. Whew! I feel better now. FriedClams, gjdale, BobG and 5 others 7 1 Quote - Tom - Current Build: Stay Tuned Completed: Vanguard Speedy, Vanguard Duchess of Kingston, Stove Project, Ships Wheel Project, NRG Capstan Project, Billings Half Moon, Dumas Chris Craft 1938 27' Triple Cockpit Barrel Back, Panart Santa Lucia , Model Shipways Constitution , MS Bounty Launch , HMS Beagle Member: Nautical Research Guild
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.