Jump to content

VASA by Lee J H - Artesania Latina - 1/65 scale


Recommended Posts

Spoiler

 

It's a new VASA from Artesania, with a scale of 1/65, which is significantly sized against the Vasa of other kit companies.

If the advantage of  laser cut fits well, and the disadvantage is that it sands the bonding part. 

I have to work on it, but it has more advantages. 990206487_wasa1.thumb.jpg.d4fb4d7d6a7795fad10d3f6690935f02.jpgvasa2.thumb.jpg.b3c1b34462079720e7ff93f027685df3.jpg

 

The creators of the pramodel seem easy to adapt to than the old kit.

 

vasa3.thumb.jpg.6f6e48b979b50c99b2a0485fe9188f24.jpg

vasa3.thumb.jpg.6f6e48b979b50c99b2a0485fe9188f24.jpg

vasa4.jpg

Link to comment
Share on other sites

This time, follow the order listed in the documention.

vasa6.thumb.jpg.ea3f35dc943fadb982ccf6aeafe77e48.jpg

 

vasa2.thumb.jpg.5e7bc6024e15e490ae94aa1e2b14f6e3.jpg

Cut the black paper thinly and place it between the decks.

For me, using paper seems to be the best thing in the results, even if it takes a while.

 

vasa3.thumb.jpg.c5769e843cecb7f0f096d78d4a94d75d.jpg

 

Teak oil was used as a finishing agent.

 

vasa4.thumb.jpg.4b6dcf83f0477657547d48fb18797f68.jpg

 

vasa5.thumb.jpg.0ac08a697f2d887a050f9456038ecede.jpg

 

Link to comment
Share on other sites

Try filling the balsa tree.

I think it would be pointless to buy and fill that expensive tree.

It's become a habit to fire and fill large ships. 

v1.thumb.jpg.bba9091e94275fec29cb954a5f014a0b.jpg

v2.thumb.jpg.8989d085be66dc162c641eadc59871b4.jpg

 

It feels like a container line...

Half of that firing amount has been added to the cumbersome task of grinding.

When you're done, it's good to feel comfortable from the time you plan your second round.

 

v3.thumb.jpg.50e7924f847ce51cdfeafe0d9d91c24d.jpg

 

v4.thumb.jpg.b8112b0121595246b29ca9e9e05e1e45.jpg

 

 

v5.thumb.jpg.88e6b36ee50b798b49e95b509973b89b.jpg

 

v6.thumb.jpg.68c47b9d1c62f88dc1087504f2b48db4.jpg

 

v7.thumb.jpg.48a75e6b782da7be68e0d5ce34a7f6b2.jpg

 

 

 

 

Link to comment
Share on other sites

4 minutes ago, baskerbosse said:

Looks great!

 

Looking at the hull lines, especially the last picture in the first post, they look good.

Much more accurate than especially Corel ..

 

Cheers,

Peter

Yes, it's more accurate than Corel.
However, it is regrettable that the plank tree is not good.
I plan to change the tree.
Link to comment
Share on other sites

the bulkheads look very thin and fragile, i agreee with the balsa infills

 

is a template in the kit for marking out the  gunport locations

Link to comment
Share on other sites

12 hours ago, baskerbosse said:

Nice!

 

Be careful with the gunports though.

The sills should be parallel to the deck, not the waterline.

 

Peter

I sometimes have doubts about Kit's instructions.
This is because it is usually tailored to the waterline.
This also works while maintaining a right angle, but it is tailored to the waterline.
I'll be careful next time.
Thank you.

Link to comment
Share on other sites

  • 2 weeks later...
On 2021. 10. 15. at 오전 11시 46분, Hubac's Historian said:

나는 최근에 AL이 이 키트를 내놓았다는 것을 발견했습니다. Deagostini와 비교하여 키트의 품질이 어떤지 알고 싶습니다. 당신은 놀라운 출발을 시작했습니다!

I've never used Deagostini before. By the way, a friend says it's the same product. 

There is a problem. It is inconvenient because there is no paper drawing.

Thank you for your support.

Link to comment
Share on other sites

 

On 10/27/2021 at 6:46 PM, ubjs said:

I have Deagostini-kit and I think it is the same as AL:s.

You could read this forum before building next steps:

https://forum.model-space.co.uk/default.aspx?g=topics&f=540

You have the official build diary of Deagostini Vasa there and some members builds.

 

 

I went to the site now.
I think it'll be a good teaching for me.
Thank you so much for your help.

Link to comment
Share on other sites

Lee,

 

You are off to a very good start - will follow along as well.

 

Regards,

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

  • 2 weeks later...

Lee,

 

Thanks for your kind words - will be very happy to assist with anything that you might require ....

Michael

Current buildSovereign of the Seas 1/78 Sergal

Under the table:

Golden Hind - C Mamoli    Oseberg - Billings 720 - Drakkar - Amati

Completed:   

Santa Maria-Mantua --

Vasa-Corel -

Santisima Trinidad cross section OcCre 1/90th

Gallery :    Santa Maria - Vasa

 

 

 

 

Link to comment
Share on other sites

  • 4 weeks later...
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...